DigiTech DOD250-13

د دفاع وزارت اوور ډرایو ۲۵۰ انلاګ اوور ډرایو پریamp د کارن لارښود

Model: DOD250-13

پیژندنه

The DOD Overdrive Preamp 250 is a legendary analog overdrive pedal designed for guitar and bass instruments. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your DOD Overdrive 250 to ensure optimal performance and longevity.

چمتو کول

د پیډل ځواک ورکول

The DOD Overdrive 250 can be powered by a single 9V alkaline dry battery or an optional 9V DC power supply (PS0913DC). Ensure the power source is correctly connected before use.

DOD Overdrive 250 pedal showing the 9V DC power supply input jack on the side.

شکل 1: Power Supply Connector. Connect a 9V DC power adapter here.

ستاسو پیډل سره نښلول

خپل وسیله سره وصل کړئ IN jack on the right side of the pedal using a standard 1/4-inch instrument cable. Connect the بهر د پیډل په چپ اړخ کې جیک ستاسو amplifier or the next pedal in your signal chain using another 1/4-inch instrument cable.

DOD Overdrive 250 pedal showing the input and output jacks on the sides.

شکل 2: Input and Output Jacks. The input jack is on the right, and the output jack is on the left.

د پیډل چلول

The DOD Overdrive 250 features two primary control knobs: GAIN او لیول, along with a footswitch and an LED indicator.

پورته view of the DOD Overdrive 250 pedal showing the Gain and Level knobs, footswitch, and blue LED.

شکل 3: Front Panel Controls. The Gain and Level knobs are at the top, with the footswitch and LED below.

کنټرولونه

  • ګټه: This knob controls the amount of overdrive or distortion applied to your signal. Turning it clockwise increases the saturation, ranging from a subtle grit to a full, aggressive grind.
  • کچه: This knob adjusts the overall output volume of the pedal. It can be used to match the bypassed signal volume, or to provide a significant boost for solos or to push your amplifier harder. With the Gain set low, increasing the Level can provide a clean boost.

فوټ سویچ او د LED شاخص

The large footswitch activates or bypasses the effect. When the effect is active, the crisp blue LED indicator will illuminate, providing clear visual feedback of the pedal's status.

DOD Overdrive 250 pedal with an arrow pointing to the blue LED indicator.

شکل 4: Crisp Blue LED Indication. The LED illuminates when the effect is active.

ریښتینی بای پاس

The DOD Overdrive 250 features true bypass circuitry. This means that when the pedal is disengaged (effect off), your guitar's signal passes directly through the pedal without any electronic interference, preserving your original tone. This is a significant improvement over older designs that could color the bypassed signal.

ساتنه

د بیټرۍ بدلول

If using a 9V battery, replace it when the LED indicator dims or the pedal's performance degrades. To replace the battery, carefully remove the bottom plate of the pedal. Disconnect the old battery and connect a new 9V alkaline battery, ensuring correct polarity. Securely reattach the bottom plate.

پاکول

Wipe the pedal's exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish and internal components.

ذخیره کول

When not in use for extended periods, disconnect the power supply or remove the battery to prevent leakage and preserve battery life. Store the pedal in a cool, dry place away from direct sunlight and extreme temperatures.

د ستونزو حل کول

ستونزهاحتمالي لاملد حل لاره
هیڅ غږ یا ضعیف سیګنال نشتهIncorrect cable connections, dead battery, faulty power supply, pedal not engaged.Check all cable connections. Replace 9V battery or verify power supply connection. Ensure the pedal is engaged (blue LED on). Test with different cables.
ناغوښتل شور او غوغاGround loop, faulty cables, interference from other electronics, power supply issues.Ensure all equipment is properly grounded. Try different cables. Move pedal away from power transformers or fluorescent lights. Use a regulated power supply.
LED نه روښانه کويNo power, dead battery, faulty LED.Check power supply or replace battery. If problem persists, contact support.

مشخصات

فیچرتفصیل
ماډلDOD250-13
ابعاد (L x W x H)4.88 x 2.61 x 3.25 انچه
وزن9.92 ounces (~0.62 lbs)
ننوتل1/4-inch Instrument
محصول1/4-inch Instrument
د چیسس موادAll Metal (Aluminum)
د بریښنا رسول9V Alkaline Dry Battery or 9V DC (PS0913DC)
د سیګنال بڼهانلاګ
رنګYellow Metallic Flake

تضمین او ملاتړ

For detailed warranty information, please refer to the documentation included with your purchase or visit the official DigiTech website. DigiTech provides support for their products through their authorized service centers and online resources.

You can find more information and contact support via the official DigiTech store: په ایمیزون کې د ډیجی ټیک پلورنځی.

Note: No official product videos from the seller were found in the provided data to be embedded in this manual.

اړوند اسناد - DOD250-13

مخکېview د ډیجی ټیک RP-10 ګیتار سیګنال پروسیسر/پښه کنټرولر او پریamp د مالک لارښود
This owner's manual provides comprehensive details on the DigiTech RP-10 Guitar Signal Processor/Foot Controller and Preamp, covering setup, operation, programming, effects, and MIDI functions.
مخکېview د ډیجی ټیک RP-6 ګیتار سیګنال پروسیسر/پښه کنټرولر او پریamp د مالک لارښود
د ډیجی ټیک RP-6 ګیتار سیګنال پروسیسر/فوټ کنټرولر او پری لپاره د مالک جامع لارښودamp, detailing its features, operations, effects, parameters, specifications, and setup.
مخکېview د ډیجی ټیک RP-1 ګیتار اغیزو پروسسر/کنټرولر او پریamp د مالک لارښود
د ډیجی ټیک RP-1 لپاره د مالک جامع لارښود، چې د هغې ځانګړتیاوې، عملیات، پروګرام کول، MIDI پلي کول، او د ګیتاریسټانو لپاره د تضمین معلومات په تفصیل سره بیانوي.
مخکېview د ډیجی ټیک RP-5 ګیتار سیګنال پروسیسر/پښه کنټرولر او پریamp د مالک لارښود
د ډیجی ټیک RP-5 ګیتار سیګنال پروسیسر/فوټ کنټرولر او پری لپاره د مالک جامع لارښودamp، د هغې ځانګړتیاوې، کنټرولونه، اغیزې، پیرامیټرې، تنظیم، او مشخصات په تفصیل سره بیانوي. د سټوډیو او ژوندیو غوښتنلیکونو لپاره د S-DISC پروسیسر کارولو څرنګوالی زده کړئ.
مخکېview د ډیجی ټیک هارډ وایر CM-2 ټیوب اوور ډرایو مالک لارښود
د ډیجی ټیک هارډ وایر CM-2 ټیوب اوور ډرایو ګیتار اغیزو پیډل لپاره د مالک لارښود، د هغې ځانګړتیاوې، عملیات، د خوندیتوب لارښوونې، تضمین، او مشخصات په تفصیل سره بیانوي.
مخکېview د ډیجی ټیک باس ډرایور باس اوور ډرایو/ تحریف پیډل - د مالک لارښود
د ډیجی ټیک باس ډرایور باس اوور ډرایو/ډیسټرشن پیډل لپاره د مالک جامع لارښود. د دې د آډیو ډی این اې ™ ټیکنالوژۍ، کنټرولونو (کچه، ټون، مخلوط، مورف)، اتصالاتو (ان پټ، آوټ ۱) په اړه زده کړه وکړئ. Amp، د CIT™ کابینې ماډلینګ سره د 2 مکسر څخه بهر)، تنظیم، د بیټرۍ بدلول، د خوندیتوب لارښوونې، او د تضمین معلومات.