Lutron Maestro Occupancy/Vacancy Sensor Switch (MS-OPS6M2N-DV-WH) Instruction Manual

1. محصول ختم شوview

The Lutron Maestro MS-OPS6M2N-DV-WH is an advanced occupancy/vacancy sensor switch designed to automatically control lighting in a room. This device utilizes passive infrared (PIR) technology to detect human motion and presence, ensuring lights are only on when needed. It combines the functionality of a standard light switch with an integrated motion sensor, offering convenience and energy savings.

کلیدي ځانګړتیاوې:

• Passive infrared motion detection with Lutron XCT technology for fine motion sensing.
• 180-degree sensor field-of-view for comprehensive room coverage.
• د نصبولو لپاره بې طرفه تار ته اړتیا ده.
• Occupancy version supports both auto-on/auto-off and manual-on/auto-off modes.
• Vacancy version is available to comply with CA Title 24 requirements.

شکل 1: مخکی view of the Lutron Maestro MS-OPS6M2N-DV-WH sensor switch.

2. ترتیب او نصب کول

د خوندیتوب مهم معلومات: Before beginning installation, turn off power at the circuit breaker or fuse box. Incorrect installation can lead to electrical shock or fire. If you are unsure about any part of these instructions, consult a qualified electrician.

اړین وسایل: Screwdriver (Phillips and flathead), wire strippers, electrical tape.

2.1 د تار لګولو لارښوونې

1. د بریښنا بندول: هغه سرکټ بریکر ومومئ چې هغه سویچ کنټرولوي چې تاسو یې بدلوئ او بند یې کړئ. د حجم په کارولو سره تایید کړئ چې بریښنا بنده دهtage ټیسټر.
2. موجوده سویچ لرې کړئ: په احتیاط سره د دیوال پلیټ لرې کړئ او موجوده سویچ د دیوال بکس څخه خلاص کړئ. تارونه د زاړه سویچ څخه جلا کړئ.
3. د تارونو پیژندنه:
   • ګرم (لین) تار: معمولا تور، د سرکټ بریکر څخه بریښنا راوړي.
   • د بار تار: Typically black, connects to the light fixture.
   • بې طرفه تار: Typically white, required for this switch.
   • ځمکني تار: معمولا بې مسو یا شنه.

   Note: If you are replacing a 3-way switch, you will also have traveler wires. This model supports 3-way circuits. Refer to the detailed wiring diagram for 3-way installations.

4. Connect Wires to Maestro Switch:
   • سره وصل کړئ ځمکنی تار from the wall box to the green ground wire on the Maestro switch.
   • سره وصل کړئ بې طرفه تار from the wall box to the white neutral wire on the Maestro switch.
   • سره وصل کړئ hot (line) wire او د تار بارول from the wall box to the two black wires on the Maestro switch. If the light does not function correctly, swap these two black wires.
   • For 3-way applications, connect the traveler wires as per the specific 3-way wiring diagram provided with the product packaging.
5. خوندي سویچ: Carefully push the wired switch into the wall box, ensuring wires are not pinched. Screw the switch into place.
6. وال پلیټ نصب کړئ: د دیوال سینګار پلیټ ضمیمه کړئ.
7. د بریښنا بیرته راګرځول: په سرکټ بریکر کې بریښنا بیرته فعاله کړئ.

شکل 2: مثالample wiring diagram for a single-pole installation. Consult the included manual for 3-way wiring.

3. عملیاتي لارښوونې

The Maestro sensor switch offers flexible operation modes to suit various needs.

3.1 د عملیاتو طریقې

• د اشغال حالت (آټو آن/آټو آف): In this mode, the lights automatically turn ON when motion is detected and automatically turn OFF after a set time delay when no motion is detected. This is ideal for high-traffic areas where hands-free operation is desired.
• د خالي ځای حالت (لاسي فعال/آټو بند): In this mode, the lights must be manually turned ON by pressing the switch button. They will then automatically turn OFF after a set time delay when no motion is detected. This mode is often used to meet energy codes and provides more control over when lights are initially activated.

3.2 د ترتیباتو تنظیم کول

The Maestro sensor switch typically has small buttons or dip switches behind the wall plate for adjusting settings such as:

• د وخت ځنډ: How long the lights remain on after the last detected motion (e.g., 1, 5, 15, 30 minutes).
• حساسیت: The level of motion required to trigger the sensor.
• عملیاتي حالت: Switching between Occupancy (Auto-On) and Vacancy (Manual-On) modes.

Refer to the detailed instructions included with your product for specific steps on how to access and adjust these settings.

4. ساتنه

The Lutron Maestro sensor switch requires minimal maintenance to ensure optimal performance.

• پاکول: د سویچ د سطحې پاکولو لپاره، نرم، d وکاروئamp ټوکر. د کثافاتو پاکوونکي، محلولونه، یا سخت کیمیاوي مواد مه کاروئ، ځکه چې دا کولی شي پای یا داخلي برخو ته زیان ورسوي.
• د سینسر خنډ: Ensure the sensor lens is not obstructed by furniture, curtains, or other objects that could block its field of view. A clear path to the sensor is crucial for accurate motion detection.
• د دوړو راټولېدل: Periodically wipe the sensor lens to prevent dust accumulation, which can reduce sensitivity.

5. ستونزه حل کول

If you encounter issues with your Maestro sensor switch, refer to the following common troubleshooting steps:

• Lights do not turn ON automatically (Occupancy Mode):
  • Verify the sensor's field of view خنډ نه دی.
  • Check the sensitivity setting; it might be too low.
  • Ensure the switch is in Occupancy (Auto-On) mode.
  • Confirm power is supplied to the switch.
• Lights do not turn OFF:
  • Ensure there is no continuous motion within the sensor's range.
  • د وخت ځنډ ترتیب وګورئ؛ دا ممکن ډیر اوږد تنظیم شوی وي.
  • Verify the switch is correctly wired, especially the load wire.
• Lights flicker or behave erratically:
  • Confirm that a neutral wire is properly connected. This switch requires a neutral wire for stable operation.
  • ډاډ ترلاسه کړئ چې د تار ټولې اړیکې خوندي دي.
  • If in a 3-way setup, ensure compatible companion switches are used and wired correctly.
• Switch is unresponsive:
  • Turn off power at the circuit breaker for 15 seconds, then restore power. This can reset the switch.
  • Check all wiring connections for looseness or incorrect placement.

If these steps do not resolve the issue, contact Lutron customer support for further assistance.

6. مشخصات

۹. د محصول ویډیوګانې

8. د تضمین معلومات

Lutron products typically come with a limited warranty covering defects in materials and workmanship. For specific warranty terms and conditions applicable to your MS-OPS6M2N-DV-WH sensor switch, please refer to the warranty card included in the product packaging or visit the official Lutron webسایټ. د تضمین ادعاوو لپاره د پیرود ثبوت وساتئ.

9. د پیرودونکي ملاتړ

For technical assistance, troubleshooting, or product inquiries, please contact Lutron customer support. You can find contact information on the official Lutron webسایټ یا د محصول اسنادو دننه.

آنلاین سرچینې:

• رسمي لیدنه وکړئ په ایمیزون کې د لوټرون پلورنځی د نورو محصولاتو او معلوماتو لپاره.
• Refer to the comprehensive FAQs and support documents available on the Lutron corporate webسایټ