Tekonsha 119178 Tail Light Converter Instruction Manual

1. پیژندنه

The Tekonsha 119178 Tail Light Converter is designed to adapt a vehicle's separate turn and stop light system (3-wire system) to a standard trailer's combined taillight wiring system (2-wire system). This unit ensures proper synchronization of vehicle and trailer lighting functions, including tail lights, stop lights, and turn signals. It is compatible with both LED and incandescent bulbs on the vehicle and trailer sides and features integrated circuit protection for enhanced safety.

Image of the Tekonsha 119178 Tail Light Converter, a compact black unit with wiring harnesses.

2. د خوندیتوب معلومات

• Always disconnect the vehicle's battery before beginning any electrical installation to prevent electrical shock or damage to the vehicle's electrical system.
• ډاډ ترلاسه کړئ چې د تار ټولې اړیکې خوندي او په سمه توګه موصل شوي دي ترڅو د لنډ سرکټ مخه ونیول شي.
• Mount the converter in a dry, protected location away from excessive heat, moisture, and moving parts.
• که تاسو د نصب کولو پروسې د کومې برخې په اړه ډاډه نه یاست، نو د موټر چلولو وړ تخنیکین سره مشوره وکړئ.
• Do not exceed the specified circuit capacities of the converter.

3. د بسته محتويات

د نصبولو پیل کولو دمخه ډاډ ترلاسه کړئ چې ټولې برخې شتون لري:

• Tekonsha 119178 Tail Light Converter Unit
• 60-inch Car Side 4-Flat Vehicle Connector with Cover
• Wiring Harness with 16 Gauge Bonded Wire

4. د محصول ب Featuresې

• Universal Circuit Protected Design: Adapts 3-wire vehicle systems to 2-wire trailer systems.
• پراخه مطابقت: Works with both LED and incandescent bulbs on the vehicle and trailer.
• Integrated Short Circuit Protection: Re-settable protection safeguards the tow vehicle from electrical shorts or incorrect wiring.
• لوړ ظرفیت: 2.1 amp stop light/turn signal circuit capacity; 7.5 amp taillight circuit capacity.
• دوامدار ساختمان: All solid-state components for reliable performance.
• پراخ شوی لاسرسی: Features a 60-inch long, car side 4-flat vehicle connector with cover and 16 gauge bonded wire.

5. ترتیب او نصب کول

Follow these steps for proper installation of the tail light converter:

1. چمتووالی: Gather necessary tools (wire strippers, crimpers, electrical tape, circuit tester, mounting hardware). Disconnect the vehicle's negative battery terminal.
2. Identify Vehicle Wires: Using a circuit tester, identify the following wires on your vehicle's taillight harness:
   • Tail Light (running lights)
   • Stop Light (brake lights)
   • کین اړخ ته ګرځیدلو اشاره
   • ښي لاس ته د تاوېدو اشاره
   • ځمکه
3. Connect Converter Input Wires: Splice the converter's input wires to the corresponding vehicle wires. Ensure secure connections using appropriate connectors or soldering, and insulate thoroughly with electrical tape or heat shrink tubing.
   • کنورټر نصواري Wire → Vehicle د لمر رڼا تار
   • کنورټر سور Wire → Vehicle رڼا ودروئ تار
   • کنورټر ژیړ Wire → Vehicle کین اړخ ته ګرځیدلو اشاره تار
   • کنورټر شین Wire → Vehicle ښي لاس ته د تاوېدو اشاره تار
   • کنورټر سپین Wire → Vehicle ځمکه (ensure a good chassis ground connection)
4. Mount Converter: Secure the converter unit in a dry, protected area of the vehicle, such as inside the trunk or under the rear bumper, using screws or zip ties. Ensure it is not exposed to direct water spray or excessive heat.
5. Connect to Trailer: Route the converter's 4-flat output connector to the rear of the vehicle where it can easily connect to the trailer's 4-flat plug. Use the included cover to protect the connector when not in use.
6. د ازموینې سیسټم: Reconnect the vehicle's battery. Connect a trailer or a trailer light tester to the 4-flat connector. Test all lighting functions: tail lights, brake lights, left turn signal, and right turn signal. Ensure all lights operate correctly and independently.

6. عملیاتي لارښوونې

Once properly installed, the Tekonsha 119178 Tail Light Converter operates automatically. When the vehicle's lights are activated, the converter processes the signals and sends the correct output to the trailer's lighting system. No manual intervention is required during operation.

• Before each towing trip, ensure the 4-flat connector is securely plugged into the trailer and that all trailer lights are functioning correctly.
• The converter is designed to work with both LED and incandescent bulbs on both the vehicle and trailer, providing flexibility for various setups.

7. ساتنه

Minimal maintenance is required for the Tekonsha 119178 Tail Light Converter:

• منظم معاینه: Periodically inspect all wiring and connections for signs of wear, corrosion, or damage. Repair or replace any compromised components immediately.
• پاکې اړیکې: Keep the 4-flat connector pins clean and free of dirt or debris. Use dielectric grease on the pins to prevent corrosion, especially in harsh environments.
• خوندي نصب کول: Ensure the converter unit remains securely mounted in its designated location.

8. ستونزه حل کول

If you encounter issues with your tail light converter, refer to the following troubleshooting guide:

9. مشخصات

• ماډل: 119178
• نښه: ټیکونشا
• Stop Light/Turn Signal Circuit Capacity: 2.1 Amps per circuit
• Taillight Circuit Capacity: 7.5 Amps
• والیtage: 12 ولټه
• واټtage: 26.2 واټ
• د محصول ابعاد: 22.56 x 10.11 x 4.78 سانتي متره (8.88 x 3.98 x 1.88 انچه)
• د توکي وزن: 181 ګرامه (0.4 پونډه)
• د تار ګیج: 16 gauge bonded wire
• د نښلونکي ډول: 4-flat vehicle connector with cover
• ساتنه: Integrated re-settable short circuit protection
• د بلب مطابقت: LED and/or Incandescent (vehicle and trailer)

10. تضمین او ملاتړ

The Tekonsha 119178 Tail Light Converter is backed by Tekonsha's د 1 کال محدود تضمیندا تضمین د عادي استعمال لاندې موادو او کاریګرۍ نیمګړتیاوې پوښي.

For warranty claims, technical assistance, or further support, please contact Tekonsha customer service through their official website or the retailer where the product was purchased. Please have your product model number and purchase information available when contacting support.