Pyramid BNPS102 Dual 10" Car Audio Subwoofers Instruction Manual

1. پیژندنه

د پیرودلو لپاره مننهasing the Pyramid BNPS102 10-Inch Dual Car Audio Subwoofers with Bandpass Enclosure. This system is designed to deliver powerful and deep bass for your car audio experience. It features a maximum power handling of 1000 watts at 4-ohm, built-in neon accent lighting, specially treated black rubber edge suspension, and a bandpass alignment for enhanced bass response. The front window is constructed from plexi-glass, showcasing the silver polypropylene cones of the subwoofers and four tuned ports.

شکل 1.1: پایview of the Pyramid BNPS102 Dual 10" Subwoofer System (2 Pack).

2. د خوندیتوب معلومات

مهرباني وکړئ د نصب او عملیاتو دمخه ټولې لارښوونې په دقت سره ولولئ. د دې لارښوونو په تعقیب کې پاتې راتلل ممکن محصول، موټر، یا شخصي ټپي کیدو لامل شي.

• د مسلکي نصب کولو وړاندیز شوی: Due to the complexity of car audio wiring and electrical systems, professional installation is highly recommended.
• د بریښنا سرچینه: Ensure the vehicle's battery is disconnected before performing any wiring to prevent electrical shorts and damage.
• وینټیلیشن: Ensure adequate ventilation around the subwoofer enclosure to prevent overheating. Do not block the tuned ports.
• خوندي نصب کول: Always secure the subwoofer enclosure properly within the vehicle to prevent it from shifting during sudden stops or accidents, which could cause injury.
• تارونه: Use appropriate gauge wiring for power, ground, and speaker connections. Incorrect wiring can lead to poor performance or damage.
• د حجم کچه: د لوړ حجم کچې سره اوږد تماس کولی شي د اوریدلو زیان لامل شي.
• وړاندیز 65 خبرداری: پدې محصول کې ممکن کیمیاوي توکي شامل وي چې د کالیفورنیا ایالت ته پیژندل شوي ترڅو د سرطان او زیږون نیمګړتیاوې یا نور د زیږون زیان لامل شي.

3. د بسته محتويات

ډاډ ترلاسه کړئ چې ټول توکي په کڅوړه کې شتون لري:

• 2 x Pyramid 10" Bandpass Subwoofer Enclosures
• 2 x 10" High Power 4 Ohm Sub-Woofers (pre-installed in enclosures)
• 2 x Neon Lights (pre-installed in enclosures)
• 1 x Neon Accent Lighting Control Unit with Power Cable (for both units)

Figure 3.1: Neon Accent Lighting Control Unit.

4. ترتیب او نصب کول

د غوره فعالیت او خوندیتوب لپاره مناسب نصب کول خورا مهم دي. که تاسو د کوم ګام په اړه ډاډه نه یاست، نو د موټر آډیو نصب کونکي مسلکي سره مشوره وکړئ.

۴.۱. د ځای غوره کول

Select a secure location in your vehicle, typically the trunk or cargo area, where the enclosure will not obstruct vision or movement, and can be securely fastened. Ensure there is sufficient space for air circulation around the ports.

شکل 4.1: پورته view of the subwoofer enclosure, illustrating its compact design.

4.2. د تارونو نښلول

The BNPS102 features a terminal cup on the rear for speaker wire connections. Ensure correct polarity (+ to + and - to -) from your amplifier to the subwoofer terminals.

• د سپیکر تار: Connect appropriate gauge speaker wire from your amplifier's subwoofer output to the terminals on the back of each enclosure.
• Power for Neon Lights: The neon accent lighting is powered separately. Connect the provided lighting control unit to a 12V DC power source in your vehicle (e.g., cigarette lighter adapter or direct wiring to a fused 12V source).

Figure 4.2: Rear terminal cup for speaker and neon light power connections.

شکل 4.3: مفصل view of the speaker terminals and DC 12V input.

4.3. Securing the Enclosure

Secure the subwoofer enclosure(s) to prevent movement. Use straps, brackets, or other appropriate mounting hardware (not included) to firmly anchor the unit to the vehicle's chassis or trunk floor.

5. عملیاتي لارښوونې

5.1. Audio System Operation

Once properly installed and connected to your car audio amplifier, the subwoofers will reproduce low-frequency audio. Adjust the gain, crossover, and phase settings on your amplifier and head unit for optimal sound quality and integration with your existing speakers.

5.2. Neon Accent Lighting

The BNPS102 features built-in neon accent lighting. Use the provided control unit to manage the lighting effects.

• د بریښنا سویچ: Turn the neon lights ON or OFF using the switch on the control unit.
• فلش حالت: Some control units may offer a "Flash" mode for dynamic lighting effects.
• روښانتیا/شدت: Adjust the brightness or intensity of the neon lights using the rotary knob or dedicated controls on the unit.

Figure 5.1: Illuminated subwoofers through the plexi-glass window.

6. ساتنه

The Pyramid BNPS102 subwoofers require minimal maintenance to ensure longevity and performance.

• پاکول: Use a soft, dry cloth to wipe down the enclosure and plexi-glass window. Avoid abrasive cleaners or solvents.
• معاینه: په دوره یي ډول د ټولو تارونو اتصالونه وګورئ ترڅو ډاډ ترلاسه شي چې دوی خوندي او له زنګ څخه پاک دي.
• چاپیریال: Keep the enclosure away from excessive moisture, direct sunlight, and extreme temperatures.

7. ستونزه حل کول

If you experience issues with your Pyramid BNPS102 subwoofers, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Pyramid customer support.

8. مشخصات

9. تضمین او ملاتړ

9.1. محدود تضمین

The Pyramid BNPS102 Dual 10" Car Audio Subwoofers come with a limited warranty. Please refer to the warranty card included with your purchase or visit the official Pyramid webد پوښښ، مودې، او د ادعاوو پروسیجرونو په اړه د مفصلو شرایطو او مقرراتو لپاره سایټ.

9.2. د پیرودونکي ملاتړ

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Pyramid customer support. Have your product model number (BNPS102) and purchase information ready when contacting support.

You can typically find contact information on the Pyramid website or through the retailer where you purchased the product. For general inquiries, you may also visit the Pyramid Store on Amazon.