Penn-Union TP-4/0 4/0 AWG Aluminum Terminal Plug Instruction Manual

پیژندنه

This manual provides essential information for the safe and correct installation and use of the Penn-Union TP-4/0 4/0 AWG Aluminum Terminal Plug. Please read these instructions thoroughly before proceeding with installation to ensure proper function and safety.

د خوندیتوب معلومات

د خوندیتوب مهمې لارښوونې

• Always disconnect power before installing or servicing electrical connectors.
• نصب کول باید یوازې د وړ پرسونل لخوا ترسره شي.
• د مناسب شخصي محافظتي تجهیزاتو (PPE) څخه کار واخلئ لکه موصل شوي دستکشې او د خوندیتوب عینکې.
• Ensure all connections are secure and meet local electrical codes and standards.
• This product is designed for aluminum conductors. Do not use with dissimilar metals unless specifically rated for such applications.
• Observe the maximum temperature rating of 257°F (125°C).

خبرداری: دا محصول ممکن تاسو د کیمیاوي موادو سره مخ کړي، په شمول د سیسه، کوم چې د کالیفورنیا ایالت ته پیژندل کیږي چې د سرطان او زیږون نیمګړتیاوې یا د زیږون نور زیانونه رامینځته کوي. د نورو معلوماتو لپاره لاړ شئ www.P65Warnings.ca.gov.

محصول پای ته ورسیدview

د محصول تفصیل

The Penn-Union TP-4/0 is a high-quality aluminum terminal plug designed for connecting 4/0 AWG aluminum conductors. It ensures a reliable electrical connection in various industrial and scientific applications, functioning as a robust split-bolt type connector.

Image: Penn-Union TP-4/0 4/0 AWG Aluminum Terminal Plug. This image displays the aluminum terminal plug, highlighting its robust construction and design for secure electrical connections.

د نصبولو لارښوونې

د نصب کولو طرزالعمل

1. چمتووالی: Ensure the power supply to the circuit is completely disconnected and verified. Clean the ends of the 4/0 AWG aluminum conductors to be connected, removing any insulation, oxidation, or debris.
2. کنډکټر داخل کړئ: Loosen the bolt on the terminal plug sufficiently to allow insertion of the prepared aluminum conductor. Insert the conductor fully into the barrel of the terminal plug.
3. اړیکه ټینګه کړئ: Using an appropriate wrench, tighten the bolt on the terminal plug. Apply sufficient torque to ensure a secure mechanical and electrical connection. Refer to manufacturer's torque specifications if available. Avoid over-tightening, which can damage the conductor or connector.
4. پیوستون تایید کړئ: Visually inspect the connection to ensure the conductor is fully seated and the bolt is tight. Perform continuity and resistance checks as required by local codes and safety standards.
5. Insulate (if necessary): If the connection is exposed, apply appropriate electrical insulation (e.g., electrical tape, heat shrink tubing) to cover the terminal plug and exposed conductor parts, ensuring compliance with safety standards.

ساتنه

د ساتنې لارښوونې

The Penn-Union TP-4/0 terminal plug is designed for long-term reliability with minimal maintenance requirements.

• Periodically inspect connections for signs of corrosion, loosening, or overheating.
• If any issues are detected, disconnect power and re-secure or replace the connector as necessary.
• Keep the area around electrical connections clean and free from dust and moisture.

مشخصات

تخنیکي مشخصات

د پیرودونکي ملاتړ

For technical assistance or further inquiries regarding the Penn-Union TP-4/0 Aluminum Terminal Plug, please contact Penn-Union customer service. Refer to the official Penn-Union webد اوسني اړیکو توضیحاتو لپاره سایټ.

Note: Warranty information is not available in the provided product data. Please consult the manufacturer's official documentation or website for current warranty terms.