پیژندنه
This manual provides essential information for the safe and effective use of Sealey WEHF5032 Hardfacing Welding Electrodes. Please read this manual thoroughly before use and retain it for future reference. Proper understanding and adherence to these instructions will ensure optimal performance and user safety.
د خوندیتوب معلومات
WARNING: Welding can be hazardous. Protect yourself and others. Read and understand this safety information before operating.
- برقي شاک وژلی شي: Do not touch live electrical parts. Wear dry welding gloves and protective clothing. Ensure your work area is dry.
- بخارات او ګازونه خطرناک کیدی شي: خپل سر د لوګیو څخه لرې وساتئ. د تنفس له ساحې څخه د لوګیو د لرې کولو لپاره د هوا د جریان یا د وتلو لارې وکاروئ.
- د قوس وړانګې سترګې او پوستکي سوځولی شي: Wear a welding helmet with a proper shade filter. Wear protective clothing to cover all exposed skin.
- د اور او چاودنې خطر: د ویلډینګ ساحې څخه ټول اور اخیستونکي مواد لرې کړئ. د اور وژنې وسیله په اسانۍ سره ولرئ.
- ګرمې برخې کولی شي د شدید سوځیدنې لامل شي: Allow welded materials to cool before handling. Use insulated gloves and tongs.
- Noise Can Damage Hearing: Wear ear protection if noise levels are high.
- Always use appropriate personal protective equipment (PPE) په شمول د ویلډینګ خولۍ، دستکشې، محافظتي جامې، او خوندیتوب بوټان.
د محصول تفصیل
The Sealey WEHF5032 Hardfacing Welding Electrodes are designed for applications requiring resistance to wear from minerals, medium shocks, and compression. These electrodes provide excellent corrosion protection and are ideal for building up surfaces on components such as blades, spades, and shovel buckets used in agricultural and construction machinery.
These electrodes are versatile and can be used with both AC (Alternating Current) and DC (Direct Current) welding power sources. The specific variant, Ø3.2mm, is recommended for use with a welding current of 130 Amperes
This image displays the Sealey WEHF5032 Hardfacing Welding Electrodes. The electrodes are gray rods, approximately 3.2mm in diameter and 350mm long, bundled together and partially stored within a bright yellow rectangular plastic case. The case has a label on top indicating 'SEALEY', 'Ø3.2 X 350MM HARDFACING WELDING ELECTRODES 5KG PACK', and 'Model No. WEHF5032'. Some electrodes are shown outside the case, illustrating their length and appearance.
مشخصات
| صفت | ارزښت |
|---|---|
| ماډل | WEHF5032 |
| د الکترود قطر | 3.2 ملي متره |
| د الکترود اوږدوالی | 350 ملي متره |
| وړاندیز شوی ویلډینګ اوسنی | 130 A |
| د بسته وزن | 5 کیلو ګرامه |
| مطابقت | AC or DC welding currents |
| غوښتنلیک | Hardfacing for wear resistance, medium shocks, compression, corrosion protection |
تنظیم او چمتو کول
- د کار ساحه: Ensure the welding area is clean, well-ventilated, and free from flammable materials.
- د بریښنا سرچینه: Connect your welding machine to a suitable power supply. Verify that the machine is set to the correct current type (AC or DC) and polarity for hardfacing applications.
- د الکترود لرونکی: Securely insert the WEHF5032 electrode into the electrode holder. Ensure good electrical contact.
- د ځمکې Clamp: د ځمکې سره نښلولamp firmly to the workpiece or a clean, bare metal surface connected to the workpiece. A good ground connection is crucial for stable arc.
- د کار ټوټې چمتو کول: Clean the surface to be hardfaced thoroughly. Remove any rust, paint, oil, or other contaminants that could affect weld quality. Preheating may be necessary for certain base metals or thick sections; consult welding guidelines for your specific material.
- PPE: Always wear all required Personal Protective Equipment (PPE) before starting any welding operation.
عملیاتي لارښوونې
- اوسنی ترتیب: Set your welding machine to the recommended current of 130 Amperes for the Ø3.2mm electrode. Adjust slightly as needed based on arc stability and desired penetration.
- د قوس ضربه: Strike the arc by either scratching the electrode against the workpiece like a match or by tapping it quickly. Once the arc is established, maintain a consistent arc length.
- د ویلډینګ تخنیک: Maintain a consistent travel speed and electrode angle. For hardfacing, a slight weaving motion or stringer beads can be used depending on the desired coverage and layer thickness. Overlap beads by approximately 30-50% to ensure full coverage.
- Layer Application: For multi-layer hardfacing, allow each layer to cool sufficiently before applying the next to prevent excessive heat buildup and potential cracking.
- د سلیګ لرې کول: After completing a weld pass, allow the weld to cool slightly, then chip off the slag using a chipping hammer and wire brush. Ensure all slag is removed before depositing subsequent layers.
- Post-Weld Cooling: Allow the hardfaced component to cool slowly in still air to minimize residual stresses.
ساتنه
- ذخیره کول: Store electrodes in a dry, cool place, preferably in their original sealed packaging or a heated electrode oven, to prevent moisture absorption. Moisture can lead to porosity and poor weld quality.
- سمبالول: Handle electrodes carefully to avoid damaging the flux coating.
- معاینه: Before use, inspect electrodes for any damage to the flux coating or core wire. Discard damaged electrodes.
د ستونزو حل کول
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| Unstable Arc / Difficulty Striking Arc | Incorrect current setting, poor ground connection, damp electrodes, improper arc length. | Adjust current, ensure good ground, dry electrodes (if applicable), maintain proper arc length. |
| ډیر سپیټر | Too high current, long arc, incorrect electrode angle. | Reduce current, shorten arc, adjust electrode angle. |
| Porosity (holes in weld) | Damp electrodes, contaminated workpiece, insufficient shielding from arc. | Dry electrodes, clean workpiece thoroughly, ensure proper arc length and technique. |
| Poor Slag Removal | Incorrect current, improper travel speed, wrong electrode angle. | Adjust current, optimize travel speed, correct electrode angle. |
په بکس کې څه دي
The Sealey WEHF5032 Hardfacing Welding Electrode package contains:
- Sealey WEHF5032 Hardfacing Welding Electrodes (Ø3.2 x 350mm, 5kg Pack)
تضمین او ملاتړ
For information regarding warranty coverage, technical support, or service for your Sealey WEHF5032 Hardfacing Welding Electrodes, please refer to the documentation provided with your purchase or contact Sealey directly through their official webسایټ یا د پیرودونکو خدماتو چینلونه. د هر ډول تضمین ادعا لپاره د پیرود ثبوت وساتئ.
For general inquiries or further assistance, you may visit the official Sealey webسایټ: www.sealey.co.uk
