KeylessOption Replacement Keyless Entry Remote Control Key Fob User Manual

پیژندنه

This manual provides detailed instructions for the KeylessOption KPT1370 replacement keyless entry remote control key fob. It covers setup, programming, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your new remote.

Image: Contents of the KeylessOption key fob package, showing two key fobs, two ring loops, and two CR2032 batteries installed.

Each package includes fully tested complete remotes with pre-installed batteries, along with easy-to-follow step-by-step programming instructions. A KeylessOption Warranty Card is also included with every purchase.

چمتو کول

Before programming, ensure your vehicle is compatible with the KPT1370 key fob. Most vehicles compatible with this remote are self-programmable. However, specific models like the Lincoln LS (2000-2006) require programming by a dealer or an automotive locksmith.

Image: A chart indicating various Ford, Lincoln, and Mercury models that support DIY self-programming for the key fob.

To verify compatibility and find specific programming instructions for your vehicle, it is recommended to visit remotes.com or consult your vehicle's owner's manual.

Operating Instructions: Programming Your Key Fob

The following procedure is a common method for self-programming Ford, Lincoln, and Mercury vehicles. Please note that specific steps may vary slightly by model year. Always refer to the instructions provided with your key fob or a reliable online resource for your exact vehicle.

1. موټر چمتو کړئ: Close all car doors. Then, open the driver-side door.
2. د برنامې حالت دننه کړئ: فشار ورکړئ خلاص کړئ button on the driver-side door. Next, turn the ignition from the بند مقام ته چلول position 8 times within 10 seconds. Ensure that the 8th turn ends in the چلول موقعیت
3. Confirm Programming Mode: The door locks will automatically lock and unlock to confirm that the vehicle has entered programming mode. If the locks do not cycle, try turning the key faster. If they still do not cycle, your vehicle may not have keyless entry or may require professional programming.
4. Program New Remote: Within 8 seconds of the door locks cycling, press any button on the new KeylessOption remote to be programmed. The door locks will cycle again to confirm that the keyless entry remote is successfully programmed.
5. Program Additional Remotes (if applicable): If you have other remotes (new or existing) for the same vehicle, press any button on each additional remote within 8 seconds of the previous remote being programmed. The door locks will cycle after each remote is successfully added. It is crucial to program all remotes (including existing ones) during the same session, as previously programmed remotes may be de-programmed if not re-added.
6. د پروګرام کولو حالت څخه وتل: Once all remotes are programmed, turn the ignition to the بند position. The locks will cycle one last time to confirm that programming is complete.

د Fob کلیدي دندې

The KeylessOption KPT1370 key fob features four primary buttons for convenient vehicle access and control:

• د بندولو تڼۍ: Press to lock all vehicle doors.
• د خلاصولو تڼۍ: Press to unlock all vehicle doors.
• د ډار تڼۍ: د موټر د الارم سیسټم د فعالولو لپاره فشار ورکړئ او ونیسئ. د غیر فعالولو لپاره بیا فشار ورکړئ.
• د ډنډ تڼۍ: Press to open or release the vehicle's trunk or liftgate.

Image: Diagram illustrating the four buttons on the key fob and their respective functions: Lock, Unlock, Panic, and Trunk.

ساتنه

To ensure the longevity and proper functioning of your KeylessOption key fob, follow these maintenance guidelines:

• د بیټرۍ بدلول: The key fob uses a CR2032 battery. If the remote's range decreases or it stops responding, replace the battery. To replace, carefully open the fob casing, remove the old battery, and insert a new CR2032 battery with the positive (+) side facing up.
• پاکول: Wipe the key fob with a soft, dry cloth to remove dust and grime. Avoid using harsh chemicals or abrasive materials.
• ذخیره کول: Store the key fob in a dry place, away from extreme temperatures and direct sunlight.
• فزیکي پاملرنه: Avoid dropping the key fob or exposing it to water, as this can damage internal components.

د ستونزو حل کول

If you encounter issues with your KeylessOption key fob, consider the following troubleshooting steps:

• ریموټ ځواب نه ورکوي:
  • Check the battery. A weak or dead battery is a common cause.
  • Ensure you are within range of the vehicle.
  • Re-attempt the programming procedure, ensuring all steps are followed precisely.
• موقتي فعالیت:
  • This could indicate a low battery. Replace the CR2032 battery.
  • Environmental interference might be a factor. Try using the remote in a different location.
• Vehicle Does Not Enter Programming Mode:
  • Ensure the ignition key turns from OFF to RUN 8 times within 10 seconds, ending on RUN. The timing is crucial.
  • Confirm your vehicle model is listed as self-programmable. Some models, like the Lincoln LS, require professional programming.
  • Verify all doors are closed before starting the process.

If issues persist after attempting these steps, please contact KeylessOption customer support.

مشخصات

Image: The back of a key fob, indicating where to find the FCC ID, and a list of compatible FCC IDs for the KeylessOption remote.

تضمین او ملاتړ

A KeylessOption Warranty Card is included with each purchase, providing details on product coverage. For any technical assistance or support inquiries regarding your key fob, please utilize the tech support resources available with your purchase. You can also visit the official KeylessOption store for more information and contact options.

Official KeylessOption Store: په ایمیزون کې د کیلي پرته اختیار پلورنځی