Behringer iNUKE NU1000 Power Ampد لوړ کارونکي لارښود

1. پیژندنه

The Behringer iNUKE NU1000 is an ultra-lightweight, high-density 1000-watt power amplifier designed for professional audio applications. This amplifier delivers significant power output while maintaining a compact and efficient design, making it suitable for various sound reinforcement needs. Its advanced Class-D technology ensures reliable performance with minimal thermal buildup.

کلیدي ځانګړتیاوې عبارت دي له:

• Delivers 2 x 500 Watts into 2 Ohms; 2 x 300 Watts into 4 Ohms; 1000 Watts into 4 Ohms (bridge mode).
• Revolutionary cool-running High-Density Class-D technology for ultimate reliability.
• Ultra-efficient switch-mode power supply for noise-free audio and superior transient response.
• "Zero-Attack" limiters provide maximum output level with reliable overload protection.
• Built-in stereo crossover with low-cut, high-cut, and full range modes.

2. د خوندیتوب مهمې لارښوونې

Please read and follow all safety instructions before operating this device to prevent electric shock, fire, or injury. Keep these instructions for future reference.

• د بریښنا سرچینه: Connect the unit only to an AC power outlet that matches the voltage او فریکونسي په شا پینل کې مشخص شوي.
• ځمکني کول: Ensure the power cord has a grounding conductor. Do not defeat the safety purpose of the polarized or grounding-type plug.
• وینټیلیشن: د هوا د جریان هیڅ لاره مه بندوئ. د جوړونکي لارښوونو سره سم یې نصب کړئ. د مناسبې هوا جریان لپاره د واحد شاوخوا کافي ځای وساتئ.
• اوبه او رطوبت: Do not use this apparatus near water or expose it to dripping or splashing. Do not place objects filled with liquids on the apparatus.
• تودوخه: د تودوخې کومې سرچینې ته نږدې مه نصب کړئ لکه ریډیټرونه، د تودوخې راجسترونه، بخارۍ، یا نور وسایل (په شمول ampلایفیر) چې تودوخه تولیدوي.
• پاکول: یوازې د وچې جامې سره پاک کړئ.
• خدمت کول: ټول خدمتونه وړ خدمت پرسونل ته راجع کړئ. خدمت کول اړین دي کله چې وسایل په هر ډول زیانمن شوي وي، لکه د بریښنا رسولو تار یا پلګ زیانمن شوی وي، مایع توی شوي وي یا توکي په وسایلو کې راوتلي وي، وسیله د باران یا رطوبت سره مخ شوې وي، په نورمال ډول کار نه کوي. ، یا غورځول شوی دی.
• کیبلونه: Use only specified attachments/accessories. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

3. تنظیم او پیوستون

3.1 پاکول او ځای پرځای کول

Carefully unpack the Behringer iNUKE NU1000 amplifier. Inspect the unit for any signs of damage during transit. Place the amplifier in a well-ventilated area, ideally in a standard 19-inch equipment rack. Ensure sufficient space around the unit for proper airflow, especially around the rear fan.

3.2 مخکینۍ تختهview

Figure 3.1: Front panel of the Behringer iNUKE NU1000 ampژوندی کوونکی دا view shows the power button, channel level controls (CH A and CH B), and status indicators.

The front panel provides access to the main operational controls and indicators:

• د بریښنا تڼۍ: بدلوي ampژوندی یا بند.
• Channel Level Controls (CH A, CH B): د هر چینل لپاره د محصول کچه تنظیم کړئ.
• Signal/Clip LEDs: Indicate signal presence and clipping (overload) for each channel.
• د بریښنا LED: روښانه کوي کله چې واحد فعال وي.

3.3 د شا پینل پیوستون

Figure 3.2: Rear panel of the Behringer iNUKE NU1000 ampژوندی کوونکی دا view displays the AC power inlet, input connectors (XLR/TRS combo), output connectors (Speakon-compatible), and crossover mode switches.

The rear panel houses all input, output, and power connections:

• د AC بریښنا داخلول: Connect the supplied power cord here. Ensure the power source matches the unit's requirements.
• Inputs (CH A, CH B): These are combo XLR/TRS 6.35mm Jack connectors for balanced or unbalanced audio signals from your mixer or audio interface.
• Outputs (CH A, CH B): Speakon-compatible connectors for connecting to your loudspeakers. Ensure correct wiring for stereo or bridge mode.
• د حالت بدلول: Selects between Stereo, Parallel, or Bridge operating modes.
• د کراس اوور سویچ: Configures the built-in stereo crossover for Low-Cut, High-Cut, or Full Range operation.

3.4 د آډیو وسیلو نښلول

1. خپل د آډیو سرچینه وصل کړئ (د مثال په توګه، مکسر، پریampلایفیر) ته Input CH A او Input CH B using appropriate XLR or 6.35mm TRS cables.
2. خپل لاوډ سپیکرونه سره وصل کړئ Output CH A او Output CH B using Speakon-compatible cables. Ensure the impedance of your speakers matches the amplifier's capabilities (2 Ohms, 4 Ohms, or 8 Ohms).
3. ترتیب کړئ حالت بدل کړئ to your desired operation (Stereo for two separate channels, Bridge for mono high-power output).
4. تنظیم کړئ کراس اوور سویچ based on your speaker setup. Use "Full Range" for full-range speakers, "Low-Cut" for subwoofers, or "High-Cut" for mid/high frequency speakers.
5. د بریښنا مزی د سره وصل کړئ د AC بریښنا جریان and then to a grounded electrical outlet.

۲. د چلولو Ampلايف

4.1 بریښنا کول / بندول

1. Before powering on, ensure all level controls on the amplifier and your audio source are set to their minimum positions.
2. فشار ورکړئ د بریښنا تڼۍ on the front panel. The Power LED will illuminate.
3. To power off, first reduce all levels, then press the د بریښنا تڼۍ.

۶.۲ د کچو تنظیم کول

Gradually increase the level controls on your audio source, then slowly raise the Channel Level Controls (CH A, CH B) په amplifier until the desired volume is achieved. Monitor the Signal/Clip LEDs:

• سیګنال LED: Indicates that an audio signal is present.
• کلیپ LED: If this LED illuminates frequently or stays lit, it indicates that the signal is too strong and clipping is occurring. Reduce the input level from your source or the amplifier's channel level to prevent distortion and potential speaker damage. The "Zero-Attack" limiters are designed to provide reliable overload protection, but continuous clipping should be avoided.

۷.۲ د کراس اوور ترتیبات

The built-in stereo crossover allows for flexible system configuration:

• پوره سلسله: Passes the entire audio spectrum to the speakers. Suitable for full-range loudspeakers.
• ټیټ کټ: Filters out high frequencies, sending only low frequencies to the speakers. Ideal for subwoofers.
• لوړ کټ: Filters out low frequencies, sending only high frequencies to the speakers. Suitable for mid/high frequency speakers.

Adjust the crossover switch on the rear panel according to your speaker setup and desired sound reproduction.

5. ساتنه

Proper maintenance ensures the longevity and optimal performance of your Behringer iNUKE NU1000 ampلايف

• پاکول: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the exterior of the unit. Do not use liquid cleaners or solvents.
• وینټیلیشن: Regularly check that the ventilation openings, especially the rear fan, are free from dust and obstructions. Blocked vents can lead to overheating and reduced performance.
• د کیبل معاینه: Periodically inspect all audio and power cables for damage. Replace any frayed or damaged cables immediately.
• ذخیره کول: که ذخیره کول amplifier for an extended period, ensure it is in a dry, dust-free environment.

6. ستونزه حل کول

This section addresses common issues you might encounter with your iNUKE NU1000 ampلايف

7. مشخصات

8. تضمین

Behringer products are designed and manufactured to the highest quality standards. For detailed warranty information, including terms and conditions, please refer to the warranty statement provided with your product or visit the official Behringer webسایټ. د هر ډول تضمین ادعا لپاره د پیرود ثبوت وساتئ.

9. ملاتړ

If you encounter issues not covered in this manual or require further assistance, please contact Behringer customer support. You can find contact information and additional resources on the official Behringer website. Please have your product model (NU1000) and serial number ready when contacting support.

آنلاین سرچینې: For the latest drivers, software, and product information, visit www.behringer.com.