پیژندنه
Thank you for choosing the AIMS Power 5000 Watt Pure Sine Power Inverter. This industrial-grade inverter is designed to convert 12 Volt DC power from batteries into 120 Volt AC pure sine wave power, suitable for a wide range of sensitive electronics and heavy-duty appliances. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your inverter.
کلیدي ځانګړتیاوې:
- 5000 Watt Continuous Power: Provides stable power for demanding applications.
- 10000 Watt Surge Capacity: Handles high startup loads from motors and appliances.
- 12 Volt DC Input: Compatible with standard 12V battery systems.
- د خالص ساین څپې محصول: Ensures clean, stable power for sensitive electronics.
- Selectable Frequency (50Hz/60Hz): Adaptable to various regional power standards.
- لوړ موثریت: Improved output performance even at low input voltages.
- Dual GFCI Outlets: Two 20A Ground Fault Circuit Interrupter outlets for enhanced safety.
- AC Terminal Block Connector: Direct connect option for hardwired applications.
- Remote On/Off Switch Capability: For convenient control.
- هر اړخیزه ساتنه: Includes short circuit, overload, over-temperature, low/high voltagد ساتنې.
- 5 Function Protection LED Indicator: Provides visual status and fault alerts.
- Thermally Controlled Dual Cooling Fans: Ensures optimal operating temperature.
د خوندیتوب معلومات
Read all instructions and warnings before operating the inverter. Failure to follow these instructions may result in electric shock, fire, serious injury, or death.
- وینټیلیشن: د انورټر شاوخوا مناسب هوا ورکول ډاډمن کړئ. د یخولو ځایونه مه بندوئ.
- چاپیریال: Install the inverter in a dry, cool, and well-ventilated area, away from direct sunlight, heat sources, and flammable materials. Avoid exposure to water or excessive humidity.
- تارونه: Use appropriate gauge wiring for DC input connections to prevent overheating and voltage drop. Ensure all connections are tight and secure.
- ځمکني کول: Properly ground the inverter chassis to a suitable earth ground.
- د بیټرۍ خوندیتوب: Work in a well-ventilated area when connecting batteries. Wear eye protection. Do not short-circuit battery terminals.
- وړ پرسونل: نصب او خدمت باید د وړ پرسونل لخوا ترسره شي.
- د بارولو ظرفیت: Do not exceed the inverter's continuous or surge power ratings.
قانوني اعلان: دا محصول ممکن هغه مواد ولري چې د کالیفورنیا وړاندیز 65 لخوا خبرداری ورکړل شوی.
تنظیم او نصب کول
Proper installation is crucial for the performance and longevity of your inverter. Follow these steps carefully.
1. Choosing a Location:
- Select a location that is dry, cool, and well-ventilated.
- د انورټر شاوخوا د هوا جریان لپاره کافي پاکوالی ډاډمن کړئ، په ځانګړې توګه د یخولو فینونو شاوخوا.
- Mount the inverter securely on a flat, non-flammable surface.
2. DC Input Connections:
Connect the inverter directly to your 12V battery bank using heavy-gauge cables. Shorter cables and larger gauge wires minimize voltage drop and maximize efficiency.
- Connect the positive (+) terminal of the inverter to the positive (+) terminal of the battery bank.
- Connect the negative (-) terminal of the inverter to the negative (-) terminal of the battery bank.
- Ensure all connections are clean, tight, and free of corrosion.
شکل 1: شاته view of the inverter with DC input terminals and cooling fans.
شکل ۵: زاویه لرونکی شا view showing the robust battery connection points.
3. AC Output Connections:
The inverter features two GFCI dual outlets and a direct connect AC terminal block.
- For standard appliances, plug them directly into the GFCI outlets.
- For hardwired applications, use the AC terminal block. Ensure proper wiring of Neutral, Earth (Ground), and Hot lines.
شکل 3: مخکی view of the inverter with AC outlets and control panel.
۵. ځمکنی کول:
Connect the inverter's chassis ground terminal to a reliable earth ground point. This is essential for safety and proper operation.
عملیاتي لارښوونې
Once installed, operating your AIMS Power inverter is straightforward.
1. د بریښنا بندول:
- Ensure all DC and AC connections are secure before powering on.
- Locate the red power switch on the front panel.
- To turn on, press the power switch to the 'ON' position. The green 'on' LED indicator should illuminate.
- To turn off, press the power switch to the 'OFF' position.
Figure 4: Close-up of the inverter's front panel, showing the power switch and indicators.
2. د فریکونسی انتخاب:
A switch on the front panel allows you to select between 50Hz and 60Hz output frequency. Ensure this matches the requirements of your connected appliances.
3. Remote On/Off Switch:
The inverter supports a remote on/off switch for convenient operation from a distance. Connect the remote switch cable to the designated port on the inverter.
۲. د LED شاخصونو پوهیدل:
The 5 Function Protection LED indicator provides visual feedback on the inverter's status and any active protections. Refer to the troubleshooting section for specific fault indications.
ساتنه
Regular maintenance ensures optimal performance and extends the lifespan of your inverter.
- پاکول: د انورټر بهرنۍ برخه په دوره یي ډول د وچ ټوکر سره پاکه کړئ. د مایع پاکوونکو څخه کار مه اخلئ.
- وینټیلیشن: Ensure cooling vents are free from dust and debris. The dual cooling fans are thermally controlled and will activate as needed to maintain optimal temperature.
- اړیکې: Regularly check all DC and AC connections for tightness and signs of corrosion. Loose connections can lead to overheating and poor performance.
- د بیټرۍ روغتیا: Maintain your battery bank according to the battery manufacturer's recommendations. A healthy battery bank is essential for inverter performance.
د ستونزو حل کول
This section provides guidance for common issues you might encounter. For complex problems, contact AIMS Power technical support.
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| انورټر نه چالانېږي. | No DC input power; Loose battery connections; Blown DC fuse (external); Inverter fault. | د بیټرۍ حجم چیک کړئtage; Verify all DC connections are secure; Check external DC fuse; Contact support if problem persists. |
| د AC آوپټ. | Overload protection; Low battery shutdown; Over-temperature shutdown; Short circuit on AC output; AC breaker tripped. | Reduce load; Recharge batteries; Allow inverter to cool; Check AC wiring for shorts; Reset AC breaker. |
| Inverter beeps or shuts down under load. | د ټیټ بیټرۍ حجمtage; Overload; Over-temperature. | د بیټرۍ حجم چیک کړئtage and charge level (Low Battery Shut Down: 10.0V); Reduce connected load; Ensure adequate ventilation. |
| Fans not running. | Normal operation (thermally controlled); Fan malfunction. | Fans only run when temperature reaches 40ºC. If inverter is hot and fans are not running, contact support. |
| د لوګي یا سوځېدو بوی. | د داخلي برخې ناکامي. | Immediately disconnect power from the inverter. Do not attempt to operate. Contact AIMS Power support for repair or replacement. |
مشخصات
Detailed technical specifications for the AIMS Power 5000 Watt Pure Sine Power Inverter.
| مشخصات | ارزښت |
|---|---|
| دوامداره بریښنا | 5000 واټ |
| د تولید ځواک زیاتوالی | 10000 Watts (1/2 second) |
| د DC ننوت Voltage | 13.2 V (Operating Range: 10.5V - 15V) |
| د محصول Voltage (نه بار) | 120Vac +/- 3% |
| د تولید څپې بڼه | خالص سیین څپې |
| د تولید فریکونسی | 50Hz or 60Hz (Selectable) |
| موثریت | 91% |
| No Load Current (Fan Off) | 2.6A (12V) |
| No Load Current (Fan On) | 4.4A (12V) |
| Low Battery Shut Down | 10.0V |
| Low Battery Return on Power | 11.2V |
| High Battery Shut Down | 15.9V |
| High Battery Return on Power | 15.0V |
| د تودوخې څخه ډیر محافظت | -25ºC - 79ºC |
| Cooling Fan Activation Temperature | 40ºC |
| ابعاد (L x W x H) | 25.59 x 8.86 x 6.22 انچه |
| وزن | ۲.۴۵ پونډه |
| د AC سایټونه | 2 x GFCI Dual Outlets (20A per block) |
تضمین او ملاتړ
AIMS Power is committed to providing reliable products and excellent customer service.
د تضمین معلومات:
This AIMS Power inverter typically comes with a 1 کلن تضمین covering parts and labor. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the documentation included with your product or contact AIMS Power directly.
تخنیکي ملاتړ:
For technical assistance, troubleshooting, or warranty inquiries, please contact AIMS Power support:
- تلیفون: 775-359-6703
- د کارونکي رسمي لارښود (PDF): د PDF لارښود ډاونلوډ کړئ
- AIMS Power Store: Visit AIMS Power Store on Amazon
When contacting support, please have your product model number (PWRIG500012120S) and purchase date ready.
