پیژندنه
This manual provides detailed instructions for the installation, operation, and maintenance of your DS18 PRO-DKH1 2-inch Compression Driver with Aluminum Horn. Please read this manual thoroughly before using the product to ensure proper function and longevity.
د محصول ځانګړتیاوې
- 2-Inch Competition Compression Driver: Designed for high-quality audio performance, featuring a titanium diaphragm, mylar capacitor crossover, and an aluminum horn.
- د لوړ ځواک اداره کول: Capable of handling up to 640W maximum power and 320W program power, delivering robust audio output.
- High-Quality Magnets: Equipped with a 35 oz Ferrite magnet for a wide range of tones and high-volume power handling.
- Integrated Aluminum Horn: Includes a durable aluminum horn, ensuring optimal sound dispersion and aesthetic integration.
- دوامدار فعالیت: Engineered for long-lasting performance without excessive power draw from your ampلايف
مشخصات
| ماډل | PRO-DKH1 |
| ډول | د کمپریشن چلوونکی |
| د RMS ځواک | 600W |
| میکس ځواک | 1000W |
| حساسیت | 108dB |
| د غږ کویل اندازه | 2.03" |
| خنډ | 8 اوهم |
| د تعدد ځواب | ۲۰ هرټز - ۲۰ کلو هرټز |
| د ډایفرام مواد | ټایټینیم |
| Horn Material | المونیم |
| د مقناطیس وزن | 35oz |
| Horn Dimensions | 157 x 157 x 132mm (6"D x 6"W x 7.75"H) |
| د حلق قطر | 2" |
| په ټولیزه توګه ژوره | ۲۵ ملي متره / ۰.۹۸" |
| د توکي وزن | 7 پونډه |
| شاملې برخې | Aluminum Horn |
تنظیم او نصب کول
د غوره فعالیت او خوندیتوب لپاره مناسب نصب کول خورا مهم دي. سپارښتنه کیږي چې نصب کول د یو وړ مسلکي لخوا ترسره شي.
پورته کول
- Ensure the mounting surface is sturdy enough to support the weight of the compression driver (7 pounds).
- Refer to the product dimensions (6"D x 6"W x 7.75"H) and throat diameter (2") to prepare the mounting hole.
- Secure the compression driver using appropriate fasteners through the mounting holes on the horn.
تارونه
- Connect the positive (+) terminal of the compression driver to the positive output of your ampلايف
- Connect the negative (-) terminal of the compression driver to the negative output of your ampلايف
- ډاډ ترلاسه کړئ چې ټولې اړیکې خوندي او په سمه توګه موصل شوي دي ترڅو د لنډ سرکټ مخه ونیول شي.
- It is recommended to use a high-pass filter (HPF) to protect the driver from low frequencies. A crossover that cuts frequencies below 800Hz is ideal for this unit.
Figure 1: DS18 PRO-DKH1 Compression Driver with Aluminum Horn.
Figure 2: Technical drawing showing dimensions and a frequency response graph for the PRO-DKH1.
عملیاتي لارښوونې
The DS18 PRO-DKH1 is designed to reproduce high frequencies with clarity and power. Follow these guidelines for optimal operation:
- خپل ځان ډاډمن کړئ amplifier is properly matched to the 8 Ohm impedance of the driver.
- Avoid exceeding the recommended RMS power of 600W to prevent damage.
- Use a high-pass filter (HPF) to prevent low-frequency signals from reaching the driver, which can cause distortion and damage.
- Gradually increase volume levels to prevent sudden peaks that could harm the driver or your hearing.
ساتنه
Regular maintenance helps ensure the longevity and performance of your compression driver.
- پاکول: Use a soft, dry cloth to wipe down the horn and driver body. Avoid using harsh chemicals or abrasive materials.
- معاینه: په دوره یي ډول د تارونو ټولې اړیکې د ټینګښت او د اغوستلو یا زنګ وهلو نښو لپاره وګورئ.
- چاپیریال: Keep the driver in a dry environment, away from direct sunlight and extreme temperatures.
د ستونزو حل کول
If you experience issues with your DS18 PRO-DKH1, refer to the following common problems and solutions:
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| نه غږ | Loose wiring, incorrect connections, amplifier off, damaged voice coil. | Check all wiring, ensure correct polarity, verify amplifier power, inspect voice coil for damage. |
| تحریف شوی غږ | Overpowering, improper crossover settings, damaged diaphragm. | کم کړي amplifier gain, verify HPF settings, inspect diaphragm for tears or creases. |
| ټیټ تولید | Incorrect impedance matching, low amplifier power, phase issues. | ډاډ ترلاسه کړئ amplifier matches 8 Ohm impedance, check amplifier output, verify speaker phase. |
If problems persist, contact DS18 customer support or a qualified audio technician.
Product Demonstration (Related Model)
Video 1: Demonstration of the DS18 PRO-DRNSC1.5DK Neodymium Driver. While not the exact PRO-DKH1 model, this video provides a general overview and sound test of a related DS18 compression driver.
تضمین او ملاتړ
The DS18 PRO-DKH1 Compression Driver comes with a محدود تضمین. For specific warranty terms, conditions, and duration, please refer to the warranty card included with your product or visit the official DS18 webسایټ
For technical support, service, or further inquiries, please contact DS18 customer service through their official channels. Keep your purchase receipt and product model number (PRO-DKH1) handy when contacting support.
