پیژندنه
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Utilitech 15-Amp Digital Residential Hardwired Countdown Lighting Timer. This device is designed to automatically turn off connected lighting or other electrical loads after a preset time interval, offering convenience and energy savings. Please read this manual thoroughly before installation and use.
د خوندیتوب معلومات
خبرداری: د بریښنا شاک خطر. ناسم نصب کول کولی شي د جدي ټپي کیدو یا مړینې لامل شي.
- د ټایمر نصبولو یا خدمت کولو دمخه تل د سرکټ بریکر یا فیوز بکس کې بریښنا بنده کړئ.
- نصب کول باید د وړ بریښنایی کارکونکي یا هغه کس لخوا ترسره شي چې د بریښنایی تارونو او ودانیو کوډونو بشپړ پوهه ولري.
- This timer is designed for indoor use only. Do not install in wet or damp ځایونه
- ډاډ ترلاسه کړئ چې ټول تارونه خوندي او په سمه توګه موصل شوي دي.
- Verify that the timer's electrical ratings (15-Amp) are compatible with the load it will control.
- A neutral wire is required for proper operation. If a neutral wire is not present in your electrical box, consult a qualified electrician for assistance.
محصول پای ته ورسیدview
The Utilitech Digital Countdown Timer features a user-friendly interface with multiple preset time options. It is designed to replace a standard wall switch.
شکل 1: مخکی view of the Utilitech In-Wall Countdown Timer. The timer features six buttons for preset time intervals: 5 minutes, 10 minutes, 30 minutes, 60 minutes, 2 hours, and 4 hours. Below these buttons is a larger button for manual On/Off control.
کلیدي ځانګړتیاوې:
- ډیجیټل ډیزاین: Provides clear indication of selected time.
- Programmable Intervals: Offers preset countdown times of 5, 10, 30, 60 minutes, and 2 or 4 hours.
- Instant Countdown: Countdown begins immediately upon selection of a time interval.
- لاسي بیارغونه: An On/Off button allows bypassing programmed settings for continuous operation or immediate shut-off.
- هارډویر نصب کول: Designed for permanent installation into a standard electrical wall box.
تنظیم او نصب کول
د نصبولو پیل کولو دمخه، ډاډ ترلاسه کړئ چې تاسو اړین وسایل لرئ: سکریو ډرایور، د تار سټریپرونه، بریښنایی ټیپ، او حجمtage ټیسټر.
- د بریښنا بندول: Locate the circuit breaker or fuse that controls the switch you are replacing. Turn off the power completely. Verify power is off using a voltage ټیسټر.
- موجوده سویچ لرې کړئ: Carefully remove the wall plate and unscrew the existing switch from the electrical box. Disconnect the wires from the old switch, noting which wire is connected to which terminal (e.g., line, load, neutral, ground).
- د تارونو پیژندنه: In a typical setup, you will find:
- کرښه (ګرم) تار: د سرکټ بریکر څخه بریښنا لیږدوي.
- د بار تار: Carries power to the light fixture or appliance.
- بې طرفه تار: Typically white, provides a return path for current. This is essential for the timer's operation.
- ځمکني تار: Bare copper or green, for safety.
یادونه: This timer requires a neutral wire. If your electrical box does not have a neutral wire, consult a qualified electrician to run one.
- د تارونو نښلول: Connect the wires from the electrical box to the corresponding wires on the Utilitech timer using wire nuts.
- Connect the timer's Line wire to the electrical box's Line (Hot) wire.
- Connect the timer's Load wire to the electrical box's Load wire.
- Connect the timer's Neutral wire to the electrical box's Neutral wire.
- Connect the timer's Ground wire to the electrical box's Ground wire.
Ensure all connections are tight and secure. Push any excess wire carefully into the electrical box, ensuring no wires are pinched or exposed.
- ټایمر نصب کړئ: Secure the timer into the electrical box using the provided screws. Attach the new wall plate.
- د بریښنا بیرته راګرځول: په سرکټ بریکر کې بریښنا بیرته فعاله کړئ.
- د ازموینې عملیات: Test the timer by pressing the various time buttons and the On/Off button to ensure proper functionality.
عملیاتي لارښوونې
The Utilitech Digital Countdown Timer is simple to operate:
- د شمېرنې وخت غوره کول: Press any of the six time buttons (5 Min, 10 Min, 30 Min, 60 Min, 2 Hour, 4 Hour) to activate the connected load for that duration. The countdown will begin immediately. The LED indicator for the selected time will illuminate.
- لارښود فعال/بند:
- To turn the connected load ON indefinitely, press the large On/Off button at the bottom. This bypasses any programmed countdown.
- To turn the connected load OFF immediately, press the large On/Off button again. This will also cancel any active countdown.
- Canceling a Countdown: To stop an active countdown and turn off the load, press the large On/Off button.
- Changing Countdown Time: If a countdown is active, pressing a different time button will immediately switch to the new countdown duration.
ساتنه
The Utilitech Digital Countdown Timer requires minimal maintenance.
- پاکول: د ټایمر پاکولو لپاره، سطحه د نرم، d سره پاک کړئamp ټوکر. د کثافاتو پاکوونکي یا محلولونه مه کاروئ. ډاډ ترلاسه کړئ چې د پاکولو دمخه بریښنا بنده ده.
- معاینه: Periodically inspect the timer and wall plate for any signs of damage or loose connections. If any issues are found, turn off power at the breaker and consult a qualified electrician.
- د کارونکي د خدمت وړ برخې نشته: There are no user-serviceable parts inside the timer. Do not attempt to open or repair the unit.
د ستونزو حل کول
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| Timer does not turn on or respond. | No power to the timer; incorrect wiring; tripped circuit breaker. | Check circuit breaker and reset if tripped. Verify all wiring connections are correct and secure (Line, Load, Neutral, Ground). Ensure power is on at the breaker. |
| Connected load does not turn on. | Incorrect load wire connection; faulty bulb/fixture; load exceeds timer's rating. | Verify load wire connection. Test the connected load with a different switch or power source. Ensure the total wattage/amperage of the load does not exceed 15-Amp. |
| Timer turns off prematurely or does not complete countdown. | Loose wiring; electrical interference; internal fault. | Turn off power and re-check all wire connections. Ensure the timer is not exposed to excessive heat or moisture. If problem persists, the unit may be faulty and require replacement. |
| LED indicators do not light up. | No power; internal fault. | Check power supply. If the timer functions but LEDs do not, the LEDs may be faulty. |
مشخصات
| صفت | تفصیل |
|---|---|
| د ماډل شمیره | CECOMINOD021110 |
| ډول | Digital Hardwired Countdown Timer |
| Maximum Operable Ampزمانه | 15 Amps |
| والیtage | Standard Residential Voltage (typically 120V AC) |
| د لګولو ډول | Hardwired, In-Wall |
| Countdown Intervals | 5 Min, 10 Min, 30 Min, 60 Min, 2 Hour, 4 Hour |
| ابعاد (H x W x D) | نږدې 5.4 x 3.9 x 1.9 انچه |
| وزن | نږدې 2.39 اونس |
| مواد | پلاستیک |
| تصدیقونه | UL, ETL, CSA |
| د کارونې چاپیریال | یوازې دننه |
تضمین او ملاتړ
For warranty information or technical support, please refer to the documentation included with your purchase or contact Utilitech customer service. Keep your purchase receipt as proof of purchase.
د اړیکو معلومات: Please refer to the official Utilitech website or product packaging for the most current support contact details.
