Tekpower YX-360TRe-b Analog Multimeter

1. پیژندنه

The Tekpower YX-360TR (also known as YX-360TReb and YX-360TRn) is a versatile analog multimeter designed for general purpose electrical testing. This device allows you to accurately measure AC/DC voltage, DC electric current, resistance, and perform diode and continuity checks. Its compact design, large mirrored scale, and built-in tilt stand make it a practical tool for various applications.

2. د خوندیتوب معلومات

Always observe standard safety precautions when using any electrical testing equipment. Failure to do so may result in injury or damage to the meter or equipment under test.

• Read this manual thoroughly before operation.
• ډاډ ترلاسه کړئ چې د ازموینې لیډونه په ښه حالت کې دي، د درزونو یا زیان څخه پاک دي.
• Always select the correct function and range before connecting the test leads to the circuit.
• هیڅکله د حجم اندازه کولو هڅه مه کوئtage on a current range setting, or vice versa.
• که چیرې میټر خراب ښکاري یا قضیه خلاصه وي نو مه یې کاروئ.
• په لوند یا وچ موسم کې د میټر کارولو څخه ډډه وکړئamp شرایط
• محتاط اوسئ کله چې د حجم سره کار کوئtagد 30V AC RMS، 42V پیک، یا 60V DC څخه پورته، ځکه چې دا د شاک خطر رامینځته کوي.
• The meter is rated for CAT II installations, meaning it is suitable for measurements performed on circuits directly connected to the low-voltage لګول.

3. محصول ختم شوview

The Tekpower YX-360TRe-b Analog Multimeter consists of several key components:

• انلاګ ښودنه: Features a large, mirrored 80mm scale for precise readings across various measurement types.
• Rotary Function/Range Switch: Used to select the desired measurement function (DCV, ACV, DCA, Resistance, etc.) and the appropriate range.
• داخله جیکونه: Includes common (COM), voltage/resistance/mA (VΩmA), and 10A input terminals for connecting test leads.
• Zero Ohm Adjustment Knob: د مقاومت اندازه کولو لپاره د میټر صفر کولو لپاره کارول کیږي.
• Tilt Back-Stand: د اسانتیا لپاره مدغم شوی سټینډ viewزاویه.

شکل 3.1: مخکی view of the Tekpower YX-360TRe-b Analog Multimeter, showing the analog display, rotary switch, and input jacks.

Figure 3.2: The Tekpower YX-360TRe-b Multimeter displayed with its included test leads and AA batteries.

4. ترتیب کول

4.1. د بیټرۍ نصب کول

The Tekpower YX-360TRe-b requires two AA batteries for operation. These batteries are typically included with the multimeter.

1. د ملټي میټر په شا کې د بیټرۍ د برخې پوښ ومومئ.
2. Use a screwdriver to remove the screw(s) securing the cover, if present.
3. د بیټرۍ کڅوړه په احتیاط سره خلاص کړئ.
4. Insert the two AA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
5. د بیټرۍ د برخې پوښ بدل کړئ او د سکرو سره یې خوندي کړئ.

۲. د ازموینې لیډونو نښلول

Connect the red and black test leads to the appropriate input jacks on the multimeter.

• د تور ټیسټ لیډ دننه کړئ -COM (Common) jack. This is the negative terminal.
• د سور ټیسټ لیډ دننه کړئ VΩmA د ډیری حجم لپاره جیکtage, resistance, and current measurements (up to 250mA).
• For higher DC current measurements (up to 250mA), ensure the rotary switch is set to the appropriate DCA range.

5. عملیاتي لارښوونې

Before taking any measurement, ensure the meter is set to the correct function and range. If the value is unknown, start with the highest range and work downwards.

5.1. DC Voltagد (DCV) اندازه کول

1. Set the rotary switch to the desired DCV range (e.g., 0.1V, 0.25V, 2.5V, 10V, 50V, 250V, 1000V).
2. سور ټیسټ لیډ د سرکټ مثبت (+) اړخ ته او تور ټیسټ لیډ منفي (-) اړخ ته وصل کړئ.
3. ټوک ولولئtage value from the DCV scale on the analog display.

5.2. AC Voltagد (ACV) اندازه کول

1. Set the rotary switch to the desired ACV range (e.g., 10V, 50V, 250V, 1000V).
2. د ازموینې لیډونه د AC حجم په اوږدو کې وصل کړئtage سرچینه.
3. ټوک ولولئtage value from the ACV scale on the analog display.

5.3. DC Current (DCA) Measurement

1. مهم: ډاډ ترلاسه کړئ چې د میټر سره په لړۍ کې د نښلولو دمخه سرکټ غیر انرژي شوی دی.
2. Set the rotary switch to the desired DCA range (e.g., 50µA, 2.5mA, 25mA, 250mA).
3. Break the circuit and connect the multimeter in series with the load. The current must flow through the meter.
4. Apply power to the circuit and read the current value from the DCA scale.

5.4. Resistance (Ω) Measurement

1. مهم: د مقاومت اندازه کولو دمخه ډاډ ترلاسه کړئ چې سرکټ یا برخه غیر انرژي شوې ده.
2. Set the rotary switch to the desired Ω range (e.g., X1, X10, X100, X1K, X10K).
3. د ازموینې لیډونه یوځای لنډ کړئ (سور او تور پروبونه لمس کړئ).
4. تنظیم کړئ ΩADJ (Zero Ohm Adjustment) knob until the needle points exactly to '0' on the Ohms scale.
5. د ازموینې لیډونه د هغه برخې په اوږدو کې وصل کړئ چې اندازه کیږي.
6. Read the value from the Ohms scale and multiply by the range multiplier (e.g., if on X100 range and reading is 50, the resistance is 50 x 100 = 5000 Ω).

5.5. Diode Check

1. ته د څرخېدو سویچ وټاکئ ډایډ or دوام function (often combined).
2. Connect the red lead to the anode and the black lead to the cathode of the diode. The meter should show a low resistance reading.
3. Reverse the leads. The meter should show a very high or infinite resistance reading.
4. For LEDs, the LED should light up when connected in the forward bias direction.

5.6. د دوام ازموینه

1. ته د څرخېدو سویچ وټاکئ دوام فعالیت
2. د ازموینې لیډونه د سرکټ یا برخې په اوږدو کې وصل کړئ ترڅو ازموینه وشي.
3. If there is continuity (low resistance), the meter will emit an audible buzzer sound and/or illuminate an LED indicator.

5.7. dB Measurement

The meter can measure decibels (dB) within a range of -10 dB to 22 dB. Refer to the specific dB scale on the analog display for readings.

6. ساتنه

6.1. د بیټرۍ بدلول

When the meter's readings become erratic or the display dims, it's time to replace the batteries. Follow the steps in Section 4.1 for battery installation.

6.2. د فیوز بدلول

The multimeter is equipped with fuse protection. If the meter stops functioning on current ranges, the fuse may need replacement. Refer to the meter's internal layout for fuse location and specifications. Always replace with a fuse of the same type and rating.

6.3. پاکول او ذخیره کول

د میټر سی پاک کړئasinد اعلان سره gamp cloth and mild detergent. Do not use abrasives or solvents. Store the meter in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries to prevent leakage.

7. ستونزه حل کول

8. مشخصات

9. تضمین او ملاتړ

For information regarding the product warranty, please refer to the documentation included with your purchase or contact Tekpower directly. For technical support or inquiries, please visit the official Tekpower webسایټ یا د دوی د پیرودونکي خدماتو څانګې سره اړیکه ونیسئ.

Tekpower Store Link: Visit the Tekpower Store on Amazon