Lepro N4100057-WW-2

Lepro 12V LED Strip Light User Manual

Model: N4100057-WW-2

1. محصول ختم شوview

The Lepro 12V LED Strip Light provides flexible, warm white illumination for various indoor applications. This non-waterproof strip features SMD 2835 LEDs, offering high brightness and low power consumption. It is designed for easy installation with a self-adhesive backing and can be cut and reconnected to fit specific lengths.

د بسته محتويات

  • 2 x Lepro 12V LED Strip Lights (32.8 ft each)
  • د کارن لارښود

Note: A 12V power adapter is not included and must be purchased separately.

Lepro LED Strip Light package contents including two reels of LED strips and a user manual.

Image 1.1: Contents of the Lepro LED Strip Light package, showing two reels of LED strips and the instruction manual.

2. د خوندیتوب لارښوونې

مهرباني وکړئ د نصبولو او کارولو دمخه د خوندیتوب ټولې لارښوونې ولولئ او پوه شئ. د دې لارښوونو په تعقیب کې پاتې راتلل ممکن د بریښنا شاک، اور، یا نورو خطرونو پایله ولري.

  • د بریښنا رسول: Only use a 12V DC power adapter. Do not use power adapters higher than 12V, as this will damage the LED strip and pose a safety risk. Ensure the total wattage of the LED strip lights does not exceed the maximum wattage of your power adapter.
  • یوازې د کور دننه کارول: This product is non-waterproof and designed for indoor use only. Avoid exposure to water, moisture, or high humidity.
  • د نصبولو سطحه: Ensure the installation surface is clean, dry, and smooth to ensure proper adhesion.
  • پرې کول: Only cut the LED strip at designated cut marks (every 3 LEDs). Cutting elsewhere will damage the circuit and render that section unusable.
  • تودوخه: While LED strips generate minimal heat, ensure proper ventilation around the installed strip. Do not cover the strip with materials that could trap heat.
  • ماشومان: کاري حجمtage is 12V DC, making it safe to touch. However, keep small components and packaging materials away from children.

3. ترتیب او نصب کول

3.1 د نصبولو دمخه

  1. خپل ترتیب پلان کړئ: Determine the desired path for your LED strip. Measure the length required.
  2. د سطحې پاکول: Thoroughly clean the installation surface with a dry cloth to remove dust, dirt, or oil. A clean surface ensures optimal adhesion of the self-adhesive backing.
  3. Test the Strip: Before permanent installation, connect the LED strip to a 12V power adapter to ensure it functions correctly.

3.2 Connecting the Strip Light

The LED strip requires a 12V DC power adapter (not included) for operation. Ensure the power adapter's connector matches the strip's connector.

  1. Locate the DC input connector on the LED strip.
  2. Connect the output plug of your 12V DC power adapter to the strip's input connector. Ensure a secure connection.
  3. د بریښنا اډاپټر په معیاري دیوال کې ولګوئ.
Diagram showing how to connect the 12V LED strip light to a power adapter.

Image 3.1: Connection diagram illustrating how to connect the LED strip to a 12V power supply. The power adapter is sold separately.

3.3 Mounting the Strip Light

The LED strip features a self-adhesive backing for easy mounting. If you need to adjust the length, the strip can be cut at specific points.

  1. Prepare for Adhesion: Peel off a small section of the protective film from the self-adhesive backing at one end of the strip.
  2. پټه تطبیق کړئ: Carefully press the exposed adhesive section onto your cleaned surface. Gradually peel off more of the protective film while pressing the strip firmly along your desired path.
  3. پرې کول (که اړتیا وي): If the strip is too long, locate the designated cut marks, typically indicated by a copper pad and a scissor icon. Use sharp scissors to cut precisely along this line. The strip can be cut every 3 LEDs (approximately 2 inches).
  4. Reconnection (optional): If you cut the strip and wish to reconnect sections or connect to other accessories, 2-pin 8mm connectors (not included) are required.
Three images demonstrating the installation process: cleaning the surface, peeling the adhesive, and cutting the LED strip at marked intervals.

Image 3.2: Step-by-step installation guide showing surface preparation, adhesive application, and how to cut the LED strip at designated marks.

4. عملیاتي لارښوونې

Operating the Lepro 12V LED Strip Light is straightforward once installed:

  • پاور آن/بند: Connect the 12V DC power adapter to a power outlet to turn the lights on. Disconnect or use a switch on your power adapter (if available) to turn them off.
  • روښانتیا: This specific model of LED strip light is نه کم کیدونکی. It operates at a fixed brightness when powered on.

5. پاملرنه او ساتنه

Proper care ensures the longevity and performance of your LED strip lights:

  • پاکول: If cleaning is necessary, ensure the power is disconnected. Gently wipe the strip with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • ذخیره کول: If removing the strip for storage, carefully peel it off the surface. Roll it loosely back onto its original reel or a similar spool to prevent kinking or damage. Store in a cool, dry place.
  • له تیز خمیدو څخه ډډه وکړئ: Do not bend the LED strip at sharp angles, as this can damage the internal circuitry.

6. ستونزه حل کول

If you encounter issues with your Lepro LED Strip Light, refer to the following table for common problems and solutions:

ستونزهاحتمالي لاملد حل لاره
د LED پټه نه روښانه کیږي.
  • اډاپټر ته بریښنا نشته.
  • تړلی اړیکه.
  • د بریښنا اډاپټر غلط.
  • ناسم والیtagد بریښنا اډاپټر.
  • زیانمن شوی LED پټه.
  • وګورئ چې ایا د بریښنا سایټ کار کوي.
  • ډاډ ترلاسه کړئ چې ټولې اړیکې خوندي دي.
  • Test the power adapter with another device if possible.
  • Verify the power adapter is 12V DC.
  • Inspect the strip for visible damage, especially at cut points or bends.
Part of the LED strip is not lighting up.
  • د پټې یوې برخې ته زیان.
  • Improper cut.
  • Inspect the non-working section for physical damage or a faulty connection if it was cut and reconnected.
  • Ensure cuts were made precisely on the designated cut marks.
چپکونکی نه چپکېږي.
  • سطحه پاکه یا نرمه نه ده.
  • Adhesive has lost its tackiness.
  • Ensure the surface is thoroughly cleaned and dry before application.
  • For persistent issues, consider using additional mounting clips or a stronger adhesive (e.g., hot glue, ensuring it does not damage the strip).

7. د محصول مشخصات

فیچرمشخصات
برانډلیپرو
د ماډل شمیرهN4100057-WW-2
رڼا رنګګرم سپین
د رنګ د حرارت درجه3000 کیلوین
د رڼا سرچینې ډولLED (SMD 2835)
د LEDs شمیر300 per 32.8 ft strip (600 total for 2-pack)
اوږدوالی32.8 ft (per strip)
والیtage12 ولټه DC
واټtage18 watts (per strip)
روښانتیا92 lm/ft (1200 Lumens total per strip)
ځانګړی ځانګړنهد کمولو وړ نه دی
د کور دننه / بهر کارولیوازې د کور دننه کارول
موادمسو، پلاستیک
د نصب کولو ډولځان چپکونکی
د پرې کولو وړEvery 3 LEDs (approx. 2 inches)
د توکي وزن۰.۹۸۶ اونس (۲۷.۹۴ ګرامه)

۷. تضمین او د پیرودونکو ملاتړ

Lepro products are manufactured with quality and reliability in mind. For specific warranty information, please refer to the documentation included with your purchase or visit the official Lepro website. If you have any questions, require technical assistance, or need to report an issue, please contact Lepro customer support through their official channels.

You can often find support contact information on the product packaging or by visiting the Lepro brand store on Amazon: لیپرو ایمیزون پلورنځی.

اړوند اسناد - N4100057-WW-2

مخکېview د لیپرو LED چت څراغ کارونکي لارښود: نصب او مشخصات
د لیپرو LED چت څراغونو لپاره د کارونکي مفصل لارښود، په شمول د ماډل مشخصات، د نصبولو لارښوونې، د خوندیتوب معلومات، او د PR1500024 او PR1500035 لړۍ لپاره ابعاد.
مخکېview د لیپرو LED چت څراغ د کارونکي لارښود او نصبولو لارښوونې
د لیپرو LED چت څراغونو لپاره جامع کارونکي لارښود، په شمول د نصبولو لارښوونې، د خوندیتوب احتیاطي تدابیر، د ماډل مشخصات، او د PR150003، PR150004، او PR150005 ماډلونو لپاره د بسته بندۍ لیست.
مخکېview د لیپرو LED څراغ پټې کارونکي لارښود او مشخصات
د لیپرو LED څراغونو پټو لپاره د کارونکي لارښود (ماډل PR4100067 لړۍ). د نصبولو، خوندیتوب، مشخصاتو، او ضایع کولو معلومات پکې شامل دي.
مخکېview د لیپرو LED سرلیکamp د کارونکي لارښود او خوندیتوب لارښود
د لیپرو ایل ای ډي هیډل لپاره جامع کارونکي لارښودamp (ماډل ۳۲۰۰۰۰۸ لړۍ)، په شمول د ځانګړتیاوو، عملیاتي لارښوونو، د خوندیتوب احتیاطي تدابیرو، او د اړیکو معلوماتو.
مخکېview د لیپرو S1 سمارټ LED پټې څراغونو کارونکي لارښود
د لیپرو S1 سمارټ LED پټو څراغونو (ماډل: 2A3MAS1) لپاره جامع کارونکي لارښود، د نصبولو، عملیاتو او ځانګړتیاوو په اړه توضیحات.
مخکېview د لیپرو S1 سمارټ LED پټې څراغ: نصب، ځانګړتیاوې، او د خوندیتوب لارښود
د لیپرو S1 سمارټ LED سټریپ لایټ لپاره جامع لارښود، چې نصب کول، د اپلیکیشن اتصال، د غږ کنټرول ادغام، د خوندیتوب احتیاطي تدابیر، تخنیکي مشخصات، او د تضمین معلومات پوښي.