UHPPOTE 125KHz RFID Access Control Keypad

1. پهview

The UHPPOTE 125KHz RFID Standalone Door Access Control Keypad is a high-quality, high-security device designed for sensitive and quick response access control. It supports up to 1000 card users and can be fully programmed directly from the keypad, eliminating the need for a computer connection. Its low-power circuit ensures a longer service life, making it suitable for various applications including factories, houses, residential quarters, offices, and mechanical/electrical control equipment.

2. کلیدي ځانګړتیاوې

• High Quality and High Security: Ensures sensitive and quick response for reliable access control.
• Full Keypad Programming: Supports adding/deleting cards, setting passwords, and other functions directly from the keypad.
• Doorbell Button Support: Includes a doorbell button for external doorbell connection.
• High Performance MCU: Utilizes an ST 32-bit MCU for stable performance and a low-power circuit for extended service life.
• یوازینی عملیات: Functions independently without requiring a computer connection.
• څو اړخیز غوښتنلیک: Ideal for factories, homes, residential areas, offices, and various control equipment.

3. تخنیکي مشخصات

4. ترتیب او نصب کول

4.1. د بسته محتويات

• 1 x UHPPOTE 125KHz RFID Access Control Keypad
• ۲ ایکس کیفوبونه
• 1 x د تار تار
• 1 x Screw Package (mounting screws and anchors)
• 1 x د کارونکي لارښود

4.2. فزیکي نصب کول

The keypad is designed for screw-in installation. Ensure you have the necessary tools (drill, screwdriver) before beginning. The device is intended for indoor use.

1. Drill four holes on the wall for the self-tapping screws and one hole for the cable.
2. Insert the plastic anchors into the four drilled holes.
3. Fix the back cover firmly on the wall using the four self-tapping screws.
4. Thread the cable through the cable hole and attach the keypad to the back cover.
5. Secure the keypad to the back cover using the securing screw at the bottom.

انځور: مخکینۍ برخه view of the UHPPOTE 125KHz RFID Access Control Keypad.

انځور: شاته view of the keypad showing the wiring harness connection point.

Image: The access control keypad mounted on a wall next to a door, demonstrating typical installation.

5. د تار کولو ډیاګرامونه

Proper wiring is crucial for the correct function of the access control system. Refer to the diagrams below for common and special power supply connections, and the video for a visual guide.

5.1. Common Power Supply Diagram

Image: Wiring diagram for connecting the access control keypad with a common power supply, exit button, and both fail-secure and fail-safe locks.

5.2. Special Power Supply Diagram

Image: Wiring diagram for connecting the access control keypad with a special power supply, exit button, and both fail-secure and fail-safe locks.

6. عملیاتي لارښوونې

The keypad allows for full programming directly from the device. Follow these steps to manage users and settings. For a visual demonstration, please refer to the operation video below.

6.1. Changing the Admin Password

1. مطبوعاتي #, then input the default admin password (e.g., 123456)، بیا فشار ورکړئ #.
2. مطبوعاتي 0.
3. Input your new admin password (4-8 digits), then press #.
4. Input the new admin password again to confirm, then press #.
5. The keypad will emit a confirmation tone.

6.2. Adding Card Users

1. مطبوعاتي #, then input the admin password, then press #.
2. مطبوعاتي 1، بیا 0.
3. Place the card you wish to add on the keypad. The keypad will beep to confirm.
4. To add more cards, place each additional card on the keypad.
5. After adding all desired cards, press # د وتلو لپاره

6.3. Adding a Card User with ID Number

1. مطبوعاتي #, then input the admin password, then press #.
2. مطبوعاتي 1، بیا 1.
3. Input a 4-digit user ID number (from 0000 to 9999), then press #.
4. Place the card on the keypad. The keypad will beep to confirm.
5. مطبوعاتي # د وتلو لپاره

6.4. Adding or Changing PIN Users

1. مطبوعاتي #, then input the admin password, then press #.
2. مطبوعاتي 1، بیا 2.
3. Input a 4-digit user ID number (from 0000 to 9999), then press #.
4. Input a new password (4-8 digits), then press #.
5. Input the new password again to confirm, then press #.
6. The keypad will emit a confirmation tone.

6.5. Setting Admin Add Card

An Admin Add Card can be used to quickly add multiple user cards without entering programming mode each time. Only one Admin Add Card can be set.

1. مطبوعاتي #, then input the admin password, then press #.
2. مطبوعاتي 6، بیا 2، بیا 1.
3. Place the card you want to designate as the Admin Add Card on the keypad. The keypad will beep to confirm.
4. مطبوعاتي # د وتلو لپاره

6.6. Setting Admin Delete Card

An Admin Delete Card can be used to quickly delete multiple user cards without entering programming mode each time. Only one Admin Delete Card can be set.

1. مطبوعاتي #, then input the admin password, then press #.
2. مطبوعاتي 6، بیا 2، بیا 2.
3. Place the card you want to designate as the Admin Delete Card on the keypad. The keypad will beep to confirm.
4. مطبوعاتي # د وتلو لپاره

6.7. Setting or Changing a PIN for an Added Card

This operation must be done outside of programming mode, and the card must already be programmed to this keypad.

1. مطبوعاتي #، بیا #.
2. Place the added card on the keypad.
3. Input the new password (4-8 digits), then press #.
4. Input the new password again to confirm, then press #.
5. The keypad will emit a confirmation tone.

7. ساتنه

• Keep the keypad clean by wiping it with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Ensure all wiring connections remain secure. Periodically check for any loose connections.
• Protect the device from extreme temperatures and moisture. It is designed for indoor use.
• Regularly test the functionality of the keypad, cards, and connected locks to ensure proper operation.

8. ستونزه حل کول

• کیپډ ځواب نه ورکوي: Check power supply connections. Ensure the device is receiving 12V.
• Cards not recognized: Ensure cards are properly enrolled. Re-enroll cards if necessary. Check the maximum range of the RFID reader (0.39 inches).
• Lock not activating: Verify wiring to the electric lock according to the diagrams. Check the lock's power supply and functionality independently.
• Cannot enter programming mode: Ensure the correct admin password is being used.
• د شاليد مسلې: Check backlight settings (ON, OFF, Auto) as described in the operating video.

9. تضمین او ملاتړ

UHPPOTE products are designed for reliability and performance. For specific warranty details, please refer to the documentation included with your purchase or contact UHPPOTE customer support. If you encounter any issues not covered in this manual or require further assistance, please reach out to our support team.

UHPPOTE Customer Support: Please visit the official UHPPOTE webد اړیکو معلوماتو او ملاتړ سرچینو لپاره سایټ.