Truper BOS-1LM 1 HP Submersible Bullet Pump for Clean Water User Manual

1. پیژندنه

This manual provides essential information for the safe and efficient operation of your Truper BOS-1LM 1 HP Submersible Bullet Pump. This pump is designed for extracting clean water from wells, springs, or for irrigation systems. It features a durable stainless steel body, a copper-wound motor for extended life, and an integrated electrical control unit.

2. د خوندیتوب لارښوونې

Read all safety warnings and instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• بریښنایی خوندیتوب: Ensure the power supply matches the pump's specifications. Always disconnect power before performing any maintenance or installation. Do not operate the pump with damaged cables or plugs.
• د اوبو کیفیت: This pump is designed for clean water only. Do not use it for flammable liquids, corrosive chemicals, or water containing large abrasive particles.
• ډوبېدل: The pump must be fully submerged during operation to prevent overheating. Ensure adequate water level.
• لګول: Securely install the pump using appropriate suspension methods. Ensure all connections are watertight.
• ماشومان او څاروي: ماشومان او څاروي د پمپ او د هغې د عملیاتي ساحې څخه لرې وساتئ.
• حرارتي محافظت: The pump is equipped with a thermal protector to prevent motor damage from overheating or blockage. If the pump stops unexpectedly, allow it to cool down before restarting and investigate the cause.

3. د محصول اجزا

Familiarize yourself with the main components of your Truper BOS-1LM pump:

انځور 3.1: Labeled diagram of the Truper BOS-1LM pump and its control unit. Key components include: Suspension Eyelets (Ojos de suspensión), 2.5 mm Suction Holes (Orificios de succión de 2.5 mm), Stainless Steel Casing (Carcasa de acero inoxidable), 38 mm Discharge Connection (Conexión de descarga de 38 mm), Power Control Box (Caja de control de encendido), On/Off Switch (Interruptor encendido/apagado), and Overload Protection Switch (Interruptor de protección de sobrecarga).

4. ترتیب کول

1. بسته بندي کول: پمپ او ټول لوازم په احتیاط سره له بسته بندۍ څخه لرې کړئ. د هر ډول زیان لپاره معاینه کړئ.
2. تعلیق: Attach a strong rope or cable to the suspension eyelets at the top of the pump. This will be used to lower and retrieve the pump. Do not use the power cable for suspension.
3. د اخراج پیوستون: Connect a 38 mm (1.5 inch) discharge hose or pipe to the pump's discharge connection. Ensure a secure and leak-free connection.
4. Control Unit Placement: Mount the electrical control unit in a dry, accessible location, away from direct water exposure.
5. بریښنایی پیوستون: Connect the pump's power cable to the control unit. Then, connect the control unit to a suitable grounded power outlet. Ensure the power supply matches the pump's voltage او د فریکونسۍ اړتیاوې.
6. د پمپ ښکته کول: Slowly lower the pump into the water source using the suspension rope. Ensure the pump is fully submerged and rests vertically, not touching the bottom or sides of the well/tank.

انځور 4.1: The Truper BOS-1LM pump measures 71 cm in height and 9 cm in diameter, indicating its compact 'bullet' design suitable for narrow spaces.

5. عملیاتي لارښوونې

Once the pump is properly installed and submerged, follow these steps for operation:

1. پاور آن: Ensure the overload protection switch on the control unit is in the 'ON' position. Press the 'ON' button on the control unit to start the pump.
2. د جریان څارنه: Observe the water flow from the discharge. The pump should begin pumping water immediately.
3. بندول: To stop the pump, press the 'OFF' button on the control unit.
4. د فعالیت منحنی: Refer to the performance curve to understand the pump's flow rate (L/min) at different discharge heights (m). This helps in optimizing usage for your specific needs.

انځور 5.1: This image illustrates the pump's operation, showing it submerged in a well, pumping water with increased pressure. It also includes a performance curve graph, indicating the recommended use area and the relationship between pumping height (Altura in meters) and flow rate (Flujo in L/min) for the BOS-1LM model.

6. ساتنه

منظم ساتنه ستاسو د پمپ اوږد عمر او غوره فعالیت تضمینوي.

• د فلټر پاکول: The pump has a filtering grid for particles up to 1.5 mm. Periodically inspect and clean the suction holes and filter to prevent blockages and maintain efficient flow.
• معاینه: Regularly inspect the pump body, power cable, and discharge hose for any signs of wear, damage, or corrosion. Replace damaged components immediately.
• ذخیره کول: که چیرې پمپ د اوږدې مودې لپاره ونه کارول شي، نو په بشپړه توګه یې پاک کړئ، ټولې اوبه وچې کړئ، او په وچ، یخ وهلو پاک ځای کې یې وساتئ.
• حرارتي محافظ: The thermal protector automatically shuts off the motor if it overheats. If this occurs, disconnect power, allow the pump to cool, and check for blockages or low water levels before restarting.

7. ستونزه حل کول

د ملاتړ سره د تماس نیولو دمخه، بیاview دا عامې ستونزې او حل لارې:

8. مشخصات

Technical specifications for the Truper BOS-1LM pump:

9. تضمین او ملاتړ

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official TRUPER webسایټ. د هر ډول تضمین ادعا لپاره د پیرود ثبوت په توګه د پیرود رسید وساتئ.

TRUPER Contact Information:

• Webسایټ: www.truper.com (Please check for local contact details)