د پامر مونیکون ایل غیر فعال مانیټر کنټرولر کارونکي لارښود

1. پیژندنه

The Palmer Monicon L is a precise analog volume control designed for professional audio environments. It serves as an intermediary device between audio sources, such as computers or audio interfaces, and self-powered monitor loudspeakers. Its passive circuitry ensures signal integrity without coloration. The unit features LED indicators and a built-in headphone amplifier, which are powered by the included DC adapter.

This manual provides detailed instructions for the setup, operation, and maintenance of your Palmer Monicon L to ensure optimal performance and longevity.

Figure 1: Palmer Monicon L Passive Monitor Controller, front angled view. This image shows the main unit with its large stereo volume knob, smaller auxiliary volume and headphone knobs, and various input/output selection buttons.

2. د خوندیتوب مهمې لارښوونې

• د وسیلې له چلولو دمخه دا لارښوونې په دقت سره ولولئ.
• دا لارښوونې د راتلونکي حوالې لپاره وساتئ.
• په محصول او پدې لارښود کې ټولو اخطارونو ته پام وکړئ.
• دا وسیله د اوبو سره نږدې مه کاروئ.
• یوازې د وچې جامې سره پاک کړئ.
• د هوا د بهېدو لارې مه بندوئ. د جوړونکي د لارښوونو سره سم نصب کړئ.
• د تودوخې کومې سرچینې ته نږدې مه نصب کړئ لکه ریډیټرونه، د تودوخې راجسترونه، بخارۍ، یا نور وسایل (په شمول ampلایفیر) چې تودوخه تولیدوي.
• یوازې د جوړونکي لخوا مشخص شوي ضمیمې / لوازم وکاروئ.
• ټول خدمتونه وړ خدمت پرسونل ته راجع کړئ. خدمت کول اړین دي کله چې وسایل په هر ډول زیانمن شوي وي، لکه د بریښنا رسولو تار یا پلګ زیانمن شوی وي، مایع توی شوي وي یا توکي په وسایلو کې راوتلي وي، وسیله د باران یا رطوبت سره مخ شوې وي، په نورمال ډول کار نه کوي. ، یا غورځول شوی دی.

3. د بسته محتويات

ډاډ ترلاسه کړئ چې لاندې ټول توکي ستاسو په کڅوړه کې شتون لري:

• Palmer Monicon L Passive Monitor Controller
• DC Power Supply (15V, 200mA)

Figure 2: The included DC 15V 200mA power supply. This adapter provides power for the LED indicators and the headphone ampلايف

4. محصول ختم شوview

4.1 د مخکني پینل کنټرولونه

شکل ۱: پورته څخه ښکته view of the Palmer Monicon L front panel, highlighting the main controls and indicators.

• STEREO VOLUME Knob: Large central knob for precise control of the main stereo output volume.
• AUX VOLUME Knob: Controls the volume level of the auxiliary input.
• HEADPHONES Knob: Adjusts the output volume for the headphone jack.
• INPUT SELECTION (STEREO/AUX) Buttons: Selects between the main stereo input (1) and the auxiliary input (2).
• OUTPUT SELECTION (1/2) Buttons: Activates or deactivates output pairs 1 and 2. Both can be active simultaneously.
• STEREO MONO Button: Sums the stereo output signal into a mono signal.
• د MUTE تtonۍ: Silences all active outputs.
• PFL STEREO / PFL AUX Buttons: Pre-Fader Listen for the stereo and auxiliary inputs, allowing monitoring through headphones independently of the main volume.
• د هیډفون جیک: 6.35 mm (1/4") TRS jack for connecting headphones.

4.2 د شا پینل پیوستون

شکل 4: شاته view of the Palmer Monicon L, showing all input and output connectors.

• DC 15V 200mA Input: Power input for the included DC adapter.
• MONO SUM Output: XLR connectors for a summed mono output, typically used for a subwoofer.
• OUTPUT 1 (L/R) XLR: Balanced XLR outputs for the first pair of monitor speakers.
• OUTPUT 2 (L/R) XLR: Balanced XLR outputs for the second pair of monitor speakers.
• STEREO INPUT (L/R) Combo Sockets: Balanced combo sockets (XLR/TRS) for the main stereo input.
• AUX INPUT (L/R) RCA & 3.5mm TRS: Auxiliary input featuring RCA connectors and a 3.5 mm TRS jack.

5. تنظیم او پیوستون

Follow these steps to connect your Palmer Monicon L to your audio system:

5.1 د بریښنا نښلول

1. Connect the included DC 15V 200mA power adapter to the "DC 15V 200mA" input on the rear panel of the Monicon L.
2. Plug the power adapter into a suitable wall outlet. The LED indicators on the front panel will illuminate.

۴.۲.۲ د آډیو ان پټ اتصالونه

The Monicon L offers two distinct stereo input options:

1. Main Stereo Input (Input 1): Use balanced XLR or 1/4" TRS cables to connect your primary audio source (e.g., audio interface, mixer output) to the "STEREO INPUT L/R" combo sockets on the rear panel.
2. Auxiliary Input (Input 2): For secondary audio sources (e.g., computer, media player), use RCA cables to the "AUX INPUT L/R" RCA connectors or a 3.5 mm TRS cable to the "AUX INPUT" 3.5mm jack.

۳.۴ د آډیو آوټ پټ اتصالونه

The Monicon L provides multiple output options for your monitoring setup:

1. Monitor Speakers (Output 1 & 2): Connect your self-powered monitor speakers using balanced XLR cables to the "OUTPUT 1 L/R" and/or "OUTPUT 2 L/R" XLR connectors. You can connect up to two pairs of monitors.
2. Subwoofer (Mono Sum): If you use a subwoofer, connect it to the "MONO SUM" XLR output. This output provides a summed mono signal of the selected stereo input.
3. هیډفونونه: Plug your headphones into the 6.35 mm (1/4") TRS "HEADPHONES" jack on the front panel.

Figure 5: A diagram illustrating typical connection scenarios for the Palmer Monicon L, showing inputs from an audio interface and a laptop, and outputs to two pairs of speakers and a subwoofer.

6. عملیات

This section details the functions of each control on your Monicon L.

6.1 د حجم کنټرول

• د سټیریو حجم: Rotate this large knob clockwise to increase the volume of the selected stereo output, and counter-clockwise to decrease it. This is the primary volume control for your monitor speakers.
• AUX VOLUME: Adjusts the input level for the auxiliary input source. This allows you to balance the volume of your auxiliary device before it reaches the main stereo volume control.
• سرونه: Controls the listening volume for headphones connected to the front panel jack.

6.2 د ننوتلو انتخاب

• INPUT SELECTION (1/2): Press the "1" button to select the main stereo input (XLR/TRS combo sockets). Press the "2" button to select the auxiliary input (RCA/3.5mm TRS). Only one input can be active at a time.

6.3 د محصول انتخاب

• OUTPUT SELECTION (1/2): Press the "1" button to activate the first pair of monitor outputs (OUTPUT 1 L/R). Press the "2" button to activate the second pair of monitor outputs (OUTPUT 2 L/R). You can activate both outputs simultaneously to listen through both speaker pairs.

۴.۲ د څارنې دندې

• STEREO MONO: Press this button to sum the stereo signal into a mono signal. This is useful for checking phase compatibility and how your mix translates to mono playback systems.
• خاموش: Press this button to instantly silence all active outputs. Press it again to restore the audio.
• PFL STEREO / PFL AUX: These buttons enable Pre-Fader Listen for the respective inputs. When activated, the selected input signal is routed directly to the headphone output, bypassing the main STEREO VOLUME control. This allows you to monitor an input source without affecting the main speaker output.

7. ساتنه او پالنه

• پاکول: Disconnect the power adapter before cleaning. Use a soft, dry cloth to wipe the surface of the unit. Do not use liquid cleaners, aerosols, or solvents.
• چاپیریال: Keep the Monicon L away from direct sunlight, excessive heat, moisture, and dust.
• ذخیره کول: که چیرې یونټ د اوږدې مودې لپاره ذخیره کوئ، نو له بریښنا څخه یې جلا کړئ او په یخ او وچ ځای کې یې وساتئ.

8. ستونزه حل کول

9. مشخصات

شکل ۴: ابعادي view of the Palmer Monicon L, showing its width (9.4"), depth (3.3"), and height (2.4").

10. تضمین او ملاتړ

For information regarding warranty terms and conditions, please refer to the warranty card included with your product or visit the official Palmer webسایټ

Should you encounter any issues or require technical assistance, please contact Palmer customer support through their official channels.

پالمر Webسایټ: www.palmer-germany.com