1. پیژندنه
This manual provides essential information for the safe and effective operation, setup, and maintenance of your Antari S-100X Artificial Snow Machine. Please read this manual thoroughly before operating the device to ensure proper function and to prevent damage or injury. Keep this manual for future reference.
شکل ۳: زاویه لرونکی view of the Antari S-100X snow machine, showing the output nozzle, fluid reservoir, and carrying handle.
2. د خوندیتوب معلومات
Always observe the following safety precautions to reduce the risk of electric shock, fire, or personal injury:
- ټولې لارښوونې ولولئ: Before operating the machine, read and understand all safety and operating instructions.
- ځمکني کول: This unit must be properly grounded. Connect only to a grounded power outlet.
- د بریښنا تار: Do not damage or modify the power cord. If the power cord is damaged, it must be replaced by the manufacturer or a qualified service agent.
- د مایع ډول: Use only Antari brand snow fluid. Using other fluids may damage the machine and void the warranty.
- وینټیلیشن: Ensure adequate ventilation around the machine. Do not block ventilation openings.
- رطوبت: Do not expose the machine to rain or moisture. Do not operate in wet conditions.
- ماشومان او څاروي: Keep the machine out of reach of children and pets.
- ساتنه: ټول خدمات وړ خدماتو پرسونل ته راجع کړئ. هڅه مه کوئ چې واحد پخپله ترمیم کړئ.
- ځای په ځای کول: Place the machine on a stable, level surface. Do not operate on an unstable surface.
- د محصول نوزل: Do not obstruct the output nozzle. Keep a safe distance from the nozzle during operation.
3. ترتیب کول
3.1 پیک کول
Carefully remove the snow machine from its packaging. Inspect the unit for any signs of damage during transit. If damage is found, contact your dealer immediately.
3.2 ځای پرځای کول
Position the snow machine on a flat, stable surface. Ensure there is sufficient space around the unit for proper ventilation. Do not place the machine directly on carpet or other soft materials that could block air vents. Ensure the output nozzle is directed away from people and sensitive equipment.
3.3 Filling the Fluid Reservoir
- Unscrew the cap from the fluid reservoir.
- Carefully pour Antari brand snow fluid into the reservoir. Do not overfill.
- Securely replace the cap on the fluid reservoir.
- Ensure the fluid hose inside the reservoir is fully submerged in the fluid.
شکل ۳.۲: شاته زاویه view of the Antari S-100X snow machine, showing the fluid reservoir and power input area.
3.4 د بریښنا نښلول
د بریښنا تار د سم حجم سره د ځمکې لاندې بریښنایی آوټ لیټ سره وصل کړئtage. Refer to the specifications section for voltage اړتیاوې.
4. عملیاتي لارښوونې
4.1 فعالول
Flip the main power switch to the 'ON' position. The machine will begin its warm-up cycle. The indicator light (if present) will illuminate, typically red, during this phase.
4.2 Warm-up Time
Allow approximately 5-7 minutes for the machine to reach its optimal operating temperature. The indicator light will change color (e.g., green) or turn off when the machine is ready to produce snow.
4.3 Activating Snow Effect
Once the machine is ready, use the integrated control or optional remote control (if applicable) to activate the snow output. Press and hold the button to produce snow. Release the button to stop.
Figure 3: The Antari S-100X snow machine in operation, emitting artificial snow against a dark background.
4.4 د بریښنا بندول
After use, turn the main power switch to the 'OFF' position. Disconnect the power cord from the outlet. Allow the machine to cool down completely before storing.
5. ساتنه
5.1 پاکول
Regularly clean the exterior of the machine with a dry, soft cloth. Do not use abrasive cleaners or solvents. Ensure all ventilation openings are free from dust and debris.
5.2 Fluid Storage
If the machine will not be used for an extended period, drain any remaining snow fluid from the reservoir. Store snow fluid in a cool, dark place, away from direct sunlight and extreme temperatures. Always use fresh fluid for optimal performance.
۶.۱ د نوزل پاکول
If snow output appears weak or inconsistent, the nozzle may be partially clogged. With the machine unplugged and cooled, gently clean the nozzle opening with a small brush or compressed air. Do not insert sharp objects into the nozzle.
6. ستونزه حل کول
This section addresses common issues you might encounter with your Antari S-100X snow machine.
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| هیڅ ځواک نشته | Power cord not connected; Power outlet faulty; Main switch off | Check power cord connection; Test outlet with another device; Ensure main switch is ON. |
| د واورې محصول نشته | No fluid in reservoir; Machine not warmed up; Nozzle clogged; Pump malfunction | Fill reservoir with fluid; Wait for warm-up indicator; Clean nozzle (see 5.3); Contact service if pump suspected. |
| Weak snow output | Low fluid level; Partially clogged nozzle; Incorrect fluid type | Refill fluid; Clean nozzle; Ensure only Antari snow fluid is used. |
| ماشین ډیر ګرموي | Blocked ventilation; Prolonged continuous operation | Ensure clear ventilation; Allow machine to cool down periodically. |
7. مشخصات
- ماډل: S-100X (also known as S-100II)
- د توکي وزن: ۲.۴۵ پونډه
- د بسته ابعاد: 24.02 x 16.14 x 15.35 انچه
- ASIN: B01745SSKC
- د موادو ډول: Cotton (referring to internal components or packaging)
- د رنګ نوم: خړ
- لومړی شتون لري: د مارچ 9، 2015
8. تضمین او ملاتړ
The Antari S-100X Artificial Snow Machine comes with a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions. For technical support, service, or replacement parts, please contact your authorized Antari dealer or the manufacturer directly. Do not attempt to service the unit yourself, as this may void your warranty.
