پیژندنه
The iOttie Easy One Touch Mini is a compact and fully functional mounting solution designed for easy installation into most vehicle air vents. This mount offers a safe, versatile, and highly functional way to secure your smartphone while driving. Its innovative Easy One Touch system allows for quick mounting and releasing of your device with a single finger press, ensuring convenience and safety on the road.

Figure 1: iOttie Easy One Touch Mini Air Vent Car Mount with a smartphone.
د محصول ځانګړتیاوې
- Easy One Touch System: Locks and releases your device with a single, simple touch.
- نړیوال مطابقت: Fits all smartphones and their cases (e.g., OtterBox, Incipio) ranging from 2.3 to 3.5 inches wide.
- غوره Viewزاویې: The cradle rotates 360 degrees at the swivel ball for customizable viewing.
- Secure Vent Grip: Features a spring-loaded one-click lock and release mechanism for a strong, clamped hold to your vent blade, minimizing vibrations.
- د کیبل مدغم مدیریت: Built-in support guides on the back hold charging wires in place for an organized setup.
د بسته محتويات
- د وینټ ماونټ هولډر
- نښلونکی
د نصبولو لارښود
Follow these steps to properly install your iOttie Easy One Touch Mini Air Vent Car Mount:
- د غره راټولول: Attach the cradle to the air vent clip. Ensure the ball joint is securely fastened by tightening the knurlد مغز مغز
- د هوا په وینټ کې دننه کړئ: Locate a suitable air vent in your vehicle. Push the vent clip firmly into one of the vent blades.
- غره خوندي کړئ: Once inserted, push the locking switch sideways (or twist the knob, depending on your specific model) to clamp the mount securely onto the vent blade. This minimizes movement and vibrations.
- سمون Viewزاویه: Utilize the 360-degree rotating ball joint to position the cradle for optimal viewing.
Video 1: Demonstration of various air vent mount installations, including the twist-on and push-in types. This video provides visual guidance on how to securely attach the mount to different car vent designs.

Figure 2: The iOttie Easy One Touch Mini securely installed in a vehicle's air vent.
عملیات
Using your iOttie Easy One Touch Mini is simple and intuitive:
- د خپل وسیله نصبول: Gently press your smartphone against the center button of the cradle. The side arms will automatically close and secure your device.
- Releasing Your Device: Squeeze the release levers located on the sides of the cradle. The arms will open, allowing you to remove your smartphone.

Figure 3: Visual guide demonstrating the one-touch lock and release functionality.
ویډیو ۱: د محصول ښودنهasing the Easy One Touch mounting and releasing of a smartphone.
ساتنه
To ensure the longevity and optimal performance of your iOttie Easy One Touch Mini, regular maintenance is recommended:
- Clean Rubber Arms: Periodically clean the rubber gripping arms with a damp cloth. This prevents dirt and debris buildup that could reduce grip effectiveness.
- Check Vent Connection: Ensure the mount remains securely clamped to the air vent. Re-tighten the locking mechanism if any looseness is observed.
- د سختې تودوخې څخه ډډه وکړئ: Prolonged exposure to extreme heat (e.g., direct sunlight in a parked car) can affect the mount's materials and adhesive properties.
د ستونزو حل کول
If you encounter any issues with your iOttie Easy One Touch Mini, consider the following:
- غر په خوندي ډول نه ساتل کیږي:
- Ensure the vent clip is fully inserted into the air vent.
- Verify the locking mechanism is fully engaged and tightened.
- Check if your vent blades are compatible and strong enough to support the mount and your device.
- Phone Slipping from Cradle:
- Clean the rubber gripping arms as described in the Maintenance section.
- Ensure your phone is centered and pressed firmly against the one-touch button when mounting.
- Confirm your phone's width is within the supported range (2.3 to 3.5 inches).
- Difficulty with One Touch Mechanism:
- Ensure no debris is obstructing the internal mechanism.
- Apply gentle, firm pressure to the center button when mounting.
مشخصات
| برانډ | iOttie |
| د ماډل شمیره | HLCRIO124 |
| د محصول ابعاد | 2.2 x 4.8 x 5.7 انچه |
| د توکي وزن | 1.6 اونس |
| رنګ | تور |
| د نصب کولو ډول | وینټ |
| مطابقت لرونکې وسیلې | Smartphones (2.3 to 3.5 inches wide) |
| ځانګړي ځانګړتیاوې | Rotatable, Easy One Touch System, Cable Management |
تضمین او ملاتړ
For warranty information, product support, or to inquire about replacement parts, please visit the official iOttie website or contact their customer service directly. iOttie is committed to providing high-quality products and excellent customer satisfaction.
تاسو هم کولی شئ لیدنه وکړئ iOttie Store on Amazon د نورو معلوماتو او محصول وړاندیزونو لپاره.





