1. پیژندنه
This manual provides essential information for the proper installation, operation, and maintenance of your Diesel Wiper WT632 Wiper Blade Assembly. Designed for recreational vehicles, this heavy-duty wiper blade ensures clear visibility under various conditions.
کلیدي ځانګړتیاوې عبارت دي له:
- Durable metal construction for longevity.
- Heavy-duty natural rubber wiping element for effective performance.
- Designed to fit a wide range of RV wiper arms with included adaptors.
- Blade length: Approximately 40 inches (1000mm).
2. د بسته محتويات
د کڅوړې د پرانیستلو پر مهال، ډاډ ترلاسه کړئ چې ټولې برخې شتون لري او زیانمن شوي نه دي. کڅوړه باید ولري:
- 1 x Diesel Equipment (Truvision) WT6-32 Heavy Duty Blade Assembly (approximately 40 inches / 1000mm in length).
Figure 2.1: Diesel Wiper WT632 Wiper Blade Assembly. This image shows the full length of the black wiper blade assembly, highlighting its robust metal frame and rubber wiping edge.
3. ترتیب او نصب کول
د غوره فعالیت او خوندیتوب لپاره سم نصب کول خورا مهم دي. دا ګامونه په دقت سره تعقیب کړئ:
- موټر چمتو کړئ: Park your vehicle on a level surface and turn off the ignition. Lift the existing wiper arm away from the windshield until it locks into the upright position. Place a towel or protective cloth on the windshield to prevent damage if the arm accidentally falls.
- زوړ وایپر تیغ لرې کړئ: Identify the attachment point of your current wiper blade. The WT632 typically uses a "Pinch Tab" mounting type. Press the small tab on the wiper arm connector and slide the old blade off the arm. Some older models may require a different removal method; consult your vehicle's manual if unsure.
- نوی وایپر تیغ وصل کړئ: Align the new Diesel Wiper WT632 blade's connector with the wiper arm's hook or pinch tab mechanism. Slide the blade onto the arm until it clicks securely into place. Gently pull on the blade to ensure it is firmly attached.
- د لاس ښکته وایپر: Carefully lower the wiper arm back onto the windshield. Ensure the blade lies flat against the glass.
- د ازموینې عملیات: Before driving, activate your vehicle's wipers to ensure the new blades operate smoothly and clear the windshield effectively. Check for any obstructions or unusual noises.
Note: If your vehicle uses a different wiper arm type, adaptors may be required. The Diesel Wiper WT632 is designed for easy installation onto most wiper arms, but specific vehicle models may vary.
4. عملیات
The Diesel Wiper WT632 Wiper Blade Assembly operates in conjunction with your vehicle's existing wiper system. Once installed, the blades will function automatically when the wiper controls are activated. Ensure your windshield is wet before operating wipers to prevent damage to the blade or windshield.
- منظم استعمال: Use wipers as needed during rain, snow, or when the windshield is dirty.
- د وینډشیلډ د مینځلو مایع: Always use windshield washer fluid to lubricate the windshield and assist in cleaning, especially when removing stubborn dirt or debris.
5. ساتنه او پالنه
To extend the lifespan and maintain the performance of your Diesel Wiper WT632 blades, follow these maintenance tips:
- منظم پاکول: Periodically clean the rubber wiping element with a soft cloth or sponge and mild soap and water. Wipe along the length of the blade to remove dirt, grime, and road film. Rinse thoroughly.
- د زیانونو لپاره معاینه کول: Regularly inspect the rubber blade for cracks, tears, or hardening. Also, check the metal frame for bends or corrosion. Damaged blades should be replaced promptly.
- د وچو مسح کولو څخه ډډه وکړئ: Never operate the wipers on a dry windshield, as this can damage the rubber blade and scratch the glass. Always use windshield washer fluid or water.
- په ژمي کې پاملرنه: In freezing conditions, ensure blades are not frozen to the windshield before operation. Gently lift them away from the glass or use a defroster. Do not use hot water, as it can crack the windshield.
6. ستونزه حل کول
If you experience issues with your wiper blades, refer to the following common problems and solutions:
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| داغونه یا بوی ورکول | Dirty blade, worn rubber, bent wiper arm, or windshield contamination. | تیغ د اعلان سره پاک کړئamp cloth. If streaking persists, inspect the rubber for wear and replace if necessary. Check wiper arm for proper pressure. Clean windshield thoroughly. |
| خبرې کول یا پریښودل | Blade angle incorrect, dry windshield, or hardened rubber. | Ensure windshield is wet during operation. Check if the wiper arm is bent, causing improper blade contact. Replace blade if rubber is hardened. |
| د پاکولو نیمګړې ساحه | Worn blade, incorrect blade length, or weak wiper arm spring. | Inspect blade for wear and replace if necessary. Verify correct blade length for your vehicle. Consult a professional if wiper arm spring is weak. |
7. مشخصات
| صفت | تفصیل |
|---|---|
| برانډ | ډیزل |
| د ماډل شمیره | WT632 |
| د OEM برخې شمیره | WT6-32 |
| د محصول ډول | Auto Accessory (Wiper Blade Assembly) |
| د موټرو خدمت ډول | Car (Recreational Vehicle) |
| د فټ ډول | د موټرو ځانګړي فټ |
| د توکي اوږدوالی | Approximately 40 inches (1000mm) |
| د نصب کولو ډول | چوکاټ ټب |
| د توکي وزن | 1 پونډه |
| د اصلي هیواد | چین |
8. د تضمین معلومات
Specific warranty details for the Diesel Wiper WT632 Wiper Blade Assembly are not provided in this manual. For information regarding product warranty, please refer to the product packaging or contact Diesel customer support directly. Keep your proof of purchase for any warranty claims.
9. د پیرودونکي ملاتړ
If you have any questions, require assistance with installation, or encounter issues not covered in this manual, please contact Diesel customer support. Visit the official Diesel website or refer to your product packaging for contact information.
د نورو معلوماتو لپاره، تاسو کولی شئ لیدنه وکړئ په ایمیزون کې د ډیزل پلورنځی.
