Craftsman 180552 14-inch Walk-Behind Mower Replacement Wheels User Manual

پیژندنه

This manual provides essential instructions for the safe and correct installation and maintenance of your Craftsman 180552 replacement wheels. These wheels are designed for 14-inch walk-behind lawn mowers from brands such as Poulan, Husqvarna, and AYP, replacing part number 151138. Please read this manual thoroughly before proceeding with installation.

د خوندیتوب معلومات

• Always wear appropriate personal protective equipment, including gloves and eye protection, when working on machinery.
• Ensure the lawn mower is turned off, the spark plug wire is disconnected, and the engine is cool before attempting any installation or maintenance.
• Use proper lifting techniques or seek assistance when handling heavy equipment.
• ماشومان او څاروي د کاري ساحې څخه لرې وساتئ.
• Refer to your lawn mower's original owner's manual for specific safety instructions related to your model.

د بسته محتويات

ډاډ ترلاسه کړئ چې ټول توکي په کڅوړه کې شتون لري:

• 2 x Craftsman 180552 14-inch Replacement Wheels

تنظیم او نصب کول

This section guides you through the process of replacing the wheels on your walk-behind lawn mower.

اړین وسایل:

• Wrench or socket set (appropriate size for wheel nuts/bolts)
• Pry bar or flathead screwdriver (optional, for stubborn caps)
• د کار دستکشې
• د خوندیتوب شیشې

د نصبولو مرحلې:

1. د رېبلو ماشین چمتو کول: Ensure the lawn mower is turned off, the spark plug wire is disconnected, and the engine is cool. Tilt the mower onto its side (with the carburetor facing up to prevent fuel leakage) or use a sturdy jack to elevate the side where the wheel will be replaced.
2. زوړ څرخ لرې کړئ:
   • Locate the center cap or nut cover on the old wheel. Carefully pry it off with a flathead screwdriver if present.
   • Using the appropriate wrench or socket, loosen and remove the nut or bolt securing the wheel to the axle.
   • Slide the old wheel off the axle. Note the position of any washers or spacers for reinstallation.
3. نوی څرخ نصب کړئ:
   

   Image: Two Craftsman 180552 14-inch replacement wheels. These wheels are designed for durability and proper fit on compatible lawn mowers.

   • Align the new Craftsman 180552 wheel with the axle. Ensure any washers or spacers are correctly positioned as they were with the old wheel.
   • Slide the new wheel onto the axle.
   • Secure the wheel with the original nut or bolt. Tighten it firmly with the wrench or socket. Do not overtighten, as this can damage the wheel or axle.
   • If applicable, replace the center cap or nut cover.
4. د نصب کولو ازموینه وکړئ: Gently spin the newly installed wheel to ensure it rotates freely without binding. Lower the mower and check for stability.

عملیات

Once the new wheels are installed, ensure they are functioning correctly before operating the lawn mower. The wheels should roll smoothly and provide adequate traction. If you notice any wobbling, binding, or unusual noises, re-check the installation steps and ensure all fasteners are securely tightened.

ساتنه

• منظم معاینه: Periodically inspect the wheels for wear, cracks, or damage. Check for any loose nuts or bolts and tighten them as necessary.
• پاکول: Keep the wheels free of grass clippings, dirt, and debris. A stiff brush and water can be used for cleaning. Avoid harsh chemicals that may damage the wheel material.
• ذخیره کول: Store the lawn mower in a clean, dry area to prevent premature wear or corrosion of the wheels and other components.

د ستونزو حل کول

مشخصات

• د ماډل شمیره: 180552 (د 151138 ځای نیسي)
• د څرخ اندازه: ۷۸۷ انچه
• نښه: craftsman
• د وسایطو خدمت ډول: Mower (Poulan, Husqvarna, AYP walk-behind mowers)
• د توکي وزن: تقریبا ۲.۳۱ پونډه (د جوړې لپاره)
• UPC: 705788550203

تضمین او ملاتړ

For warranty information or technical support, please refer to the original purchase documentation or contact the retailer where the product was purchased. Specific warranty terms may vary.