پیژندنه
د پیرودلو لپاره مننهasing the Technoline WT 537 Projection Alarm Clock. This manual provides detailed instructions for setting up, operating, and maintaining your new device. Please read this manual thoroughly before use to ensure proper function and longevity of the product.
شکل 1: مخکی view of the Technoline WT 537 Projection Alarm Clock. The display shows the time (12:00), day of the week (WE), DST indicator, moon phase, temperature (25.8°C), humidity (60%), and date (30-4).
د بسته محتويات
- Technoline WT 537 Projection Alarm Clock
- د بریښنا اډاپټر
- د کارونکي لارښود (دا لاسوند)
چمتو کول
1. د بریښنا پیوستون
- Unpack the alarm clock and its power adapter.
- Insert the small end of the power adapter into the DC IN port located on the back of the alarm clock.
- Plug the other end of the power adapter into a standard electrical outlet. The display will illuminate.
2. Initial Setup and Radio Control Time Synchronization
Upon initial power-up, the clock will attempt to synchronize with the radio-controlled time signal (DCF77). This process may take several minutes. Ensure the clock is placed away from electronic interference for best reception.
- A radio signal icon will flash on the display during synchronization.
- Once synchronized, the icon will become solid, and the time, date, and day of the week will be automatically set.
- If synchronization fails, you may need to manually set the time (see "Operating" section).
عملیاتي لارښوونې
1. د روښانتیا تنظیم کول
The display features adjustable brightness. Press the روښانه / سنوز button (usually located on top) to cycle through different brightness levels or to turn off the display backlight for undisturbed sleep.
2. د الارم تنظیم کول
- فشار ورکړئ الارم د الارم ترتیب حالت ته د ننوتلو لپاره تڼۍ.
- د کارولو +/- د ساعت تنظیمولو لپاره تڼۍ، بیا فشار ورکړئ الارم بیا د تایید لپاره.
- د کارولو +/- buttons to adjust the minute, then press الارم د تایید او وتلو لپاره.
- فشار ورکړئ په الارم روان / بند د الارم د فعالولو یا غیر فعالولو لپاره تڼۍ. کله چې فعال وي نو د الارم آیکون به په نندارتون کې څرګند شي.
۴. د سنوز فعالیت
کله چې د الارم غږ کیږي ، فشار ورکړئ روښانه / سنوز button to activate the snooze function. The alarm will pause for approximately 5 minutes and then sound again.
۴. د پروجیکشن ځانګړتیا
The WT 537 can project the time and indoor temperature onto a wall or ceiling. The projection lens is located on the side of the unit.
- To activate/deactivate the projection, press the پروژی تڼۍ
- Rotate the projection lens to adjust the angle of the projected image.
- Adjust the focus wheel (if present, typically near the lens) to sharpen the projected image.
5. د حرارت درجه انتخاب
To switch between Celsius (°C) and Fahrenheit (°F) for temperature display, locate the ° سي / ° ف button (often on the back or bottom) and press it.
6. Manual Time/Date Setting (if radio control fails)
If the radio control signal is weak or unavailable, you can manually set the time and date.
- فشار ورکړئ او ونیسئ MODE/SET button for a few seconds to enter manual setting mode.
- د کارولو +/- د چمکۍ ارزښت تنظیمولو لپاره تڼۍ (د مثال په توګه، ساعت، دقیقه، کال، میاشت، ورځ).
- مطبوعاتي MODE/SET to confirm the current setting and move to the next.
- Continue until all desired settings are adjusted, then press MODE/SET د وتلو لپاره
ساتنه
پاکول
- د ساعت سطحه د نرم او وچ ټوکر سره پاک کړئ.
- د سختو نښو لپاره، لږ څه d وکاروئamp ټوکر په نرم صابون سره ومینځئ، بیا سمدلاسه وچ کړئ.
- د کثافاتو پاکوونکي، محلولونه، یا کیمیاوي سپرې مه کاروئ، ځکه چې دا کولی شي c ته زیان ورسويasing یا ښودنه.
- Keep the projection lens clean and free of dust for optimal clarity.
عمومي پاملرنه
- Avoid placing the clock in direct sunlight or near heat sources.
- Protect the device from extreme temperatures and high humidity.
- Do not drop the clock or subject it to strong impacts.
د ستونزو حل کول
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| ښودنه خالي یا تیاره ده. | Power adapter not connected properly; display brightness set too low. | Ensure power adapter is securely plugged in. Press روښانه / سنوز د روښانتیا تنظیم کولو لپاره تڼۍ. |
| Time is incorrect or not setting automatically. | Poor radio signal reception; interference. | Relocate the clock to an area with better signal. Avoid placing near other electronics. Manually set time if necessary. |
| پروجیکشن تیاره دی یا نه لیدل کیږي. | Lens out of focus; projection angle incorrect; room too bright. | Adjust the focus wheel on the projection lens. Rotate the lens to change the angle. Ensure the room is sufficiently dark. |
| الارم نه غږېږي. | Alarm not activated; volume too low (if adjustable). | Ensure the alarm icon is visible on the display. Check alarm settings. |
مشخصات
شکل 2: Dimensions of the Technoline WT 537 Projection Alarm Clock.
- ماډل: WT 537
- نښه: ټیکنولین
- د ښودلو ډول: ډیجیټل
- رنګ: سپین
- مواد: پلاستیک
- د بریښنا سرچینه: د بریښنا تار شوی
- د محصول ابعاد (تقریبا): 6.5" (Length) x 2.2" (Width) x 3.0" (Height) / 16.5 cm (Length) x 5.6 cm (Width) x 7.5 cm (Height)
- د توکي وزن: 10.8 اونس (305 ګرامه)
- ځانګړي ځانګړتیاوې: Alarm, Projection, Temperature Display, Humidity Display, Date Display, Radio Controlled Time
- د کور دننه او بهر کارول: دننه
تضمین او ملاتړ
Technoline products are designed for reliability and performance. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Technoline webسایټ
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Technoline customer service. Contact information can typically be found on the manufacturer's webپه سایټ یا د محصول په بسته بندۍ کې.
مهرباني وکړئ د تضمین ادعاګانو لپاره د پیرود ثبوت وساتئ.
