د فوکوس CIS10 IP68 10Amp د سولر چارج کنټرولر کارن لارښود

1. پیژندنه

This manual provides essential instructions for the safe and efficient operation of your Phocos CIS10 IP68 10Amp Solar Charge Controller. The CIS10 is designed for off-grid solar light systems and battery charging, featuring automatic 12V/24VDC system voltage detection and a robust IP68 waterproof design. Please read this manual thoroughly before installation and use.

2. د خوندیتوب معلومات

د خوندیتوب مهمې لارښوونې:

• تل بیټرۍ لومړی د چارج کنټرولر سره وصل کړئ، بیا د سولر پینل سره، او په پای کې بار سره. په برعکس ترتیب کې منقطع کړئ.
• Ensure all connections are tight and secure to prevent excessive voltage drop and loose connections.
• Install the controller in a well-ventilated area, away from flammable gases.
• کنټرولر مه جلا کوئ یا یې پخپله ترمیم مه کوئ. د خدماتو لپاره وړ پرسونل سره اړیکه ونیسئ.
• Wear appropriate personal protective equipment (PPE) when working with batteries and solar panels.
• The controller is IP68 rated for water and dust ingress, but avoid submerging it for extended periods or exposing it to high-pressure water jets.

3. د محصول ب Featuresې

The Phocos CIS10 Solar Charge Controller offers the following key features:

• IP68 پنروک ډیزاین: Suitable for outdoor use, resistant to water spray, rain, and condensation.
• اتومات Voltagای کشف: په اتوماتيک ډول د 12V یا 24V DC سیسټم وال کشف کويtages.
• ۴-سtage PWM Technology: Provides Soft Start, Bulk, Absorption, Float, and Equalization charging stages for optimal battery health and system performance.
• د بیټرۍ پراخه مطابقت: Works with LifePo4, LTO, GEL, AGM, Lead-Acid, Calcium, and EFB batteries.
• د څو خوندیتوب ځانګړتیاوې: Built-in protection against over-temperature, over-voltage, over-current, over-charging, over-discharging, overload, and short circuits.
• Compact and Thin Design: Maximizes solar power utilization with minimal self-power consumption.

4. ترتیب او نصب کول

Follow these steps for proper installation of your Phocos CIS10 controller:

1. پورته کول: Choose a suitable location for mounting the controller. Although IP68 rated, mounting in a shaded or protected area can extend its lifespan. Ensure adequate space for cable connections.
2. د بیټرۍ پیوستون: Connect the battery cables to the controller's battery terminals first. Ensure correct polarity (positive to positive, negative to negative). The controller will automatically detect the system voltage (12V یا 24V).
   

   Image 4.1: Phocos CIS10 controller showing battery, solar panel, and load connection points, along with LED indicators for status.

3. د سولر پینل پیوستون: Connect the solar panel cables to the controller's solar panel terminals. Observe correct polarity. The controller will begin charging the battery.
4. د بار اتصال (اختیاري): If using the controller for a DC load (e.g., solar light), connect the load cables to the controller's load terminals. Ensure correct polarity.
5. اړیکې تایید کړئ: Double-check all connections for tightness and correct polarity before powering on the system.

The controller's compact design and integrated wiring simplify installation. Its IP68 rating ensures durability in various outdoor conditions.

Image 4.2: The Phocos CIS10 controller demonstrating its compact size with a ruler and highlighting its IP68 waterproof capability.

5. عملیاتي لارښوونې

The Phocos CIS10 operates automatically once connected. It utilizes advanced 5-stage Pulse Width Modulation (PWM) charging technology to optimize battery charging and extend battery life.

5.1. چارج کول Stages

• نرم پیل: Gradually increases current to the battery.
• د بلک چارج: Delivers maximum current to rapidly charge the battery to approximately 80% capacity.
• د جذب چارج: بیټرۍ په دوامداره توګه چارج کويtage to bring it to 100% capacity.
• د فلوټ چارج: Maintains the battery at a full charge by providing a small, constant voltage.
• برابرول: Automatically performs equalization every 28 days for calcium/EFB batteries to prevent sulfation and ensure cell balance.

5.2. Work Mode (Optional)

The CIS10 controller supports configurable work modes, such as time control and light control, which can be set using an optional external unit like the CIS-CU (sold separately). This allows for customized operation of connected loads, such as solar lights.

6. ساتنه

The Phocos CIS10 is designed for minimal maintenance due to its robust IP68 rating and epoxy-encapsulated PCB. However, periodic checks are recommended:

• بصری معاینه: په دوره یي ډول کنټرولر او ټولې اړیکې د زیان، زنګ وهلو، یا خلاص تارونو د نښو لپاره معاینه کړئ.
• پاکول: If necessary, gently clean the exterior of the controller with a damp ټوکر د سختو کیمیاوي موادو او خړوبولو موادو څخه کار مه اخلئ.
• د بیټرۍ روغتیا: Monitor your battery's performance. The controller's equalization feature helps maintain battery health for compatible types.

7. ستونزه حل کول

The CIS10 controller includes multiple built-in protections to prevent damage. If you encounter issues, consider the following:

• No Charging/Load Output:
  • د تارونو ټولې اړیکې د ټینګښت او سم قطبیت لپاره وګورئ.
  • ډاډ ترلاسه کړئ چې د سولر پینل په کافي اندازه د لمر وړانګې ترلاسه کوي.
  • د بیټرۍ حجم تایید کړئtage is within the operating range (12V/24V).
  • Check for any blown fuses in the system (if applicable).
• د تودوخې څخه ډیر محافظت: If the controller becomes excessively hot, it may temporarily reduce or stop charging/output. Ensure it's not installed in an area with poor ventilation or direct, intense heat.
• ډیر ولtage/Under-Voltage ساتنه: The controller will protect the battery from overcharging or deep discharge. If the battery voltage is too low, the load may be disconnected.
• Short Circuit/Overload Protection: If a short circuit or overload occurs on the load or solar input, the controller will temporarily shut down to protect itself and the system. Remove the fault and the controller should resume normal operation.

If problems persist, refer to the detailed specifications or contact Phocos customer support.

8. مشخصات

Detailed technical specifications for the Phocos CIS10 Solar Charge Controller:

9. تضمین او ملاتړ

Phocos is a German brand known for quality assurance in solar power products. For warranty information, technical support, or service inquiries, please contact your authorized Phocos dealer or visit the official Phocos webسایټ د تضمین ادعاګانو لپاره خپل د پیرود رسید وساتئ.

For additional resources and product updates, you may visit the Phocos official webسایټ.