د آډیو کنټرول LC-4.800 کارن لارښود

1. پیژندنه

Welcome to the user manual for the AudioControl LC-4.800 Multi-Channel 800 Watt RMS High Power Car Audio Ampژوندی کوونکی دا amplifier is designed to provide exceptional audio performance and control for your car audio system, whether integrating with an aftermarket or factory stereo.

The LC-4.800 delivers 125 watts RMS per channel and can be bridged to provide 400 watts per channel, ensuring powerful and clear sound reproduction. It features advanced technologies like AccuBASS for enhanced low-frequency response and MILC (Maximum Input Level Control) for optimal signal integrity.

2. کلیدي ځانګړتیاوې

• د بریښنا تولید: 125 watts RMS x 4 channels at 4 ohms, 200 watts RMS x 4 channels at 2 ohms, 400 watts RMS x 2 channels bridged at 4 ohms.
• AccuBASS Circuitry: Provides improved bass response, especially when integrating with factory audio systems that reduce bass at higher volumes.
• MILC (Maximum Input Level Control): LED indicators for optimal signal flow and clip detection, preventing distortion.
• GTO™ Signal Sense: Automatic turn-on when a signal is detected from speaker-level inputs.
• انعطاف منونکي معلومات: Six active speaker-level inputs and line-level RCA inputs for versatile connectivity.
• Adjustable Crossovers: Highly adjustable high-pass and low-pass filters for precise sound tuning.
• د چینل لنډیز: Accommodates separate bass, midrange, and treble signals from complex factory systems.
• اختیاري ریموټ: Compatible with the ACR-1 wired remote for volume control.

3. محصول ختم شوview

یادونه: د ورکړل شوي معلوماتو پراساس د سرایت کولو لپاره هیڅ رسمي محصول ویډیوګانې شتون نه درلودې.

4. ترتیب او نصب کول

4.1 د خوندیتوب احتیاطونه

• د هر ډول نصبولو پیل کولو دمخه د موټر بیټرۍ قطع کړئ.
• د بریښنایی ستونزو د مخنیوي لپاره مناسب ځمکنۍ کول ډاډمن کړئ.
• د بریښنا، ځمکې او سپیکر اتصال لپاره مناسب ګیج تارونه وکاروئ.
• پورته کول amplifier securely in a well-ventilated area, away from heat sources and moisture.

4.2 د تارونو نښلول

The LC-4.800 offers flexible input options for both line-level (RCA) and speaker-level signals. Refer to Figure 3.4 for a visual guide to the connection panel.

1. د بریښنا پیوستون: Connect the +12V terminal to the vehicle's positive battery terminal via an appropriate fuse (not supplied).
2. ځمکنۍ اړیکه: Connect the Ground terminal to a clean, bare metal chassis point in the vehicle.
3. ریموټ چالان: Connect the Remote terminal to the head unit's remote output or use the GTO™ Signal Sense feature.
4. د ننوتلو سیګنالونه:
   • Line-Level Inputs (RCA): Connect your head unit's RCA outputs to the Front/Left and Rear/Right RCA inputs on the ampلايف
   • د سپیکر په کچه معلومات: For factory stereos, connect the vehicle's speaker wires directly to the Speaker Level Inputs. The amplifier can sum signals if needed.
5. د سپیکر محصولات: Connect your speakers to the Speaker Outputs, observing correct polarity. The amplifier supports 4-channel stereo or 2-channel bridged configurations.
6. Optional ACR-1 Remote: If using, connect the ACR-1 remote to the dedicated Remote Level Control port.

یادونه: For optimal performance and to prevent distortion, it is recommended to use wire ferrules on speaker terminals for a cleaner and more secure connection.

۲. د چلولو Ampلايف

5.1 Initial Power-Up and Gain Setting

After all connections are made, reconnect the vehicle's battery. The amplifier should power on. The MILC™ (Maximum Input Level Control) LEDs are crucial for setting proper gain levels.

1. Turn your head unit volume up to about 75% of its maximum.
2. Slowly increase the gain controls on the LC-4.800 for each channel until the corresponding MILC™ LED just begins to flicker or illuminate.
3. Once the LED flickers, back off the gain slightly until the LED is off. This indicates the maximum clean input signal level, preventing clipping and distortion.

مهم: Setting gains correctly is vital for sound quality and amplifier longevity. The MILC™ LEDs provide an accurate visual indicator of clipping.

5.2 Crossover Adjustments

The LC-4.800 features adjustable crossover networks to optimize sound for your specific speakers.

• د لوړ پاس فلټر (HPF): Used for full-range speakers to prevent low frequencies from reaching them, improving clarity and power handling. Adjust the frequency knob to the desired cutoff.
• د ټیټ پاس فلټر (LPF): Used for subwoofers to allow only low frequencies to pass through. Adjust the frequency knob to the desired cutoff.
• د بانډ پاس فلټر (BPF): Allows a specific range of frequencies to pass through, useful for certain mid-range speaker setups.

Experiment with these settings to achieve the best sound balance for your system. Consult your speaker specifications for recommended crossover points.

5.3 AccuBASS™ Control

The AccuBASS™ circuit compensates for factory stereo bass roll-off. Adjust the AccuBASS™ threshold and level controls to restore and enhance bass response without distortion.

6. ساتنه

The AudioControl LC-4.800 is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure its longevity:

• پاکول: په دوره توګه پاک کړئ ampد لایفیر بهرنۍ برخه د نرم او وچ ټوکر سره ومینځئ. د سختو کیمیاوي موادو یا د کثافاتو پاکوونکو کارولو څخه ډډه وکړئ.
• وینټیلیشن: ډاډ ترلاسه کړئ amplifier's heat sinks are free from obstructions to allow for proper airflow and cooling. Do not cover the ampلايف
• اړیکې: Occasionally check all wiring connections (power, ground, remote, inputs, outputs) to ensure they remain secure and free from corrosion. Loose connections can lead to performance issues or damage.
• فیوزونه: د amplifier uses external fuses (40A x 2). If a fuse blows, replace it only with a fuse of the same type and rating. Never use a higher-rated fuse.

7. ستونزه حل کول

If you experience issues with your LC-4.800 ampد ژوندي کوونکي لپاره، لاندې عامې ستونزې او حل لارې ته مراجعه وکړئ:

8. مشخصات

یادونه: مشخصات د محصول د ښه والي لپاره پرته له خبرتیا د بدلون تابع دي.

9. تضمین او ملاتړ

9.1 د تضمین معلومات

AudioControl products are known for their quality and reliability. The LC-4.800 ampلایفیر معمولا د 5 کلن تضمین when registered online. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

For detailed warranty terms and conditions, please refer to the official AudioControl webسایټ یا د تضمین کارت چې ستاسو محصول سره شامل دی.

9.2 د پیرودونکي ملاتړ

If you require technical assistance, have questions about installation, or need to initiate a warranty claim, please contact AudioControl customer support:

• Webسایټ: Visit the official AudioControl webد FAQs، ملاتړ اسنادو، او د اړیکو معلوماتو لپاره سایټ.
• تلیفون: Refer to the contact section on the AudioControl website for phone support hours.
• بریښنالیک: Use the contact form or email address provided on the official webسایټ

When contacting support, please have your product model (LC-4.800) and serial number ready.