Beetech ST-9283 Handheld Digital Thermometer User Manual

1. پیژندنه

This manual provides detailed instructions for the safe and effective use of your Beetech ST-9283 Handheld Digital Thermometer. This device is designed for accurate temperature measurement in various applications, including industrial settings, bakeries, food processing, and refrigeration. Please read this manual thoroughly before operating the thermometer and retain it for future reference.

2. محصول ختم شوview

The Beetech ST-9283 is a compact and versatile digital thermometer featuring a stainless steel probe for precise temperature readings. It includes a clear digital display and user-friendly buttons for various functions.

کلیدي ځانګړتیاوې:

• د اندازه کولو پراخه لړۍ
• د سټینلیس سټیلټ تحقیقات
• Selectable Temperature Units (°C / °F)
• د ډاټا نیول فنکشن
• Maximum and Minimum Temperature Memory
• د الارم فعالیت
• د اتومات بریښنا بند

انځور 1: مخکی view of the Beetech ST-9283 Handheld Digital Thermometer, showing the digital display, control buttons (OFF/ON, °C/°F, MAX/MIN, HOLD), and the retractable stainless steel probe.

شاملې برخې:

• Beetech ST-9283 Digital Thermometer
• د تودوخې سینسر تحقیقات
• د کارن لارښود
• Battery (may not be pre-installed)

3. پیل کول

3.1 پیک کول او تفتیش کول

Carefully remove the thermometer from its packaging. Inspect the device for any signs of damage. If any damage is found, do not use the thermometer and contact customer support.

Image 2: The Beetech ST-9283 Digital Thermometer shown in its retail packaging, highlighting its handheld design and digital display.

3.2 د بیټرۍ نصب کول

The thermometer requires one 1.5V AAA (UM4/LR44 equivalent) battery. Batteries are typically not included.

1. د بیټرۍ د برخې پوښ د واحد په شا کې ومومئ.
2. If secured by screws, use a small screwdriver to loosen them.
3. په احتیاط سره د بیټرۍ پوښ لرې کړئ.
4. Insert the new 1.5V AAA battery, ensuring correct polarity (+ and -).
5. Replace the battery cover and tighten any screws if applicable.

4. عملیات

۸ پاور آن/بند

• د فعالولو لپاره: فشار ورکړئ آن/بند button once. The thermometer will perform a self-test, displaying a full segment flash before showing the normal display.
• د بریښنا بندولو لپاره: فشار ورکړئ او ونیسئ آن/بند button for approximately 3 seconds, then release. Alternatively, press the آن/بند button once if the unit is already on and not in a special mode.

4.2 دحرارت اندازه کول

1. ډاډ ترلاسه کړئ چې ترمامیتر فعال دی.
2. Unwind the sensor cord completely.
3. Penetrate the stainless steel probe into the substance to be measured by approximately 25mm (1 inch).
4. Wait for the reading on the digital display to stabilize. This indicates the current temperature.

4.3 Unit Selection (°C / °F)

د سیلسیس (°C) او فارنهایټ (°F) د تودوخې واحدونو ترمنځ د بدلولو لپاره:

• فشار ورکړئ ° سي / ° ف button once. The display will toggle between the two units.

4.4 د ډیټا هولډ فعالیت

To hold the current temperature reading on the display:

• فشار ورکړئ هوډ button once. The current reading will be frozen, and the "HOLD" icon along with "°C" or "°F" will flash on the display.
• To release the hold function and return to normal display, press the هوډ تڼۍ یو ځل بیا.

4.5 Maximum and Minimum Temperature Memory

The thermometer can store the maximum and minimum temperatures recorded during a measurement session.

1. فشار ورکړئ MAX/MIN button once to display the maximum temperature reading. The "MAX" icon will flash.
2. فشار ورکړئ MAX/MIN button again to display the minimum temperature reading. The "MIN" icon will flash.
3. فشار ورکړئ MAX/MIN button a third time to return to the normal temperature display.
4. To clear the recorded maximum and minimum temperatures from memory, switch off the thermometer.

Image 3: Back of the Beetech ST-9283 Digital Thermometer packaging, showing detailed operational instructions, features, and specifications.

5. ساتنه او پالنه

5.1 پاکول

• Wipe the thermometer body with a clean, damp ټوکر. د کثافاتو پاکوونکي مه کاروئ او نه هم واحد په اوبو کې ډوب کړئ.
• Clean the stainless steel probe thoroughly after each measurement, especially when used with food or in industrial applications, to prevent cross-contamination.

5.2 د بیټرۍ بدلول

When the display becomes dim or the thermometer functions erratically, it is time to replace the battery. Follow the steps outlined in Section 3.2.

5.3 ذخیره کول

Store the thermometer in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, remove the battery to prevent leakage.

6. د خوندیتوب معلومات

• Do not put the test probe inside an oven or microwave oven.
• وسیله د ماشومانو له لاسرسي لرې وساتئ.
• Do not expose the thermometer to extreme temperatures, humidity, or direct sunlight for prolonged periods.
• Do not attempt to disassemble or modify the thermometer. This will void the warranty and may cause damage or injury.
• د ځایی مقرراتو سره سم کارول شوي بیټرۍ تصفیه کړئ.

7. مشخصات

8. ستونزه حل کول

If you encounter issues with your thermometer, please refer to the following common solutions:

• نه ښودنه / کم ښودنه: Check if the battery is installed correctly. Replace the battery if it is low or depleted.
• ناسم لوستل: Ensure the probe is fully inserted into the substance. Clean the probe thoroughly. Verify that the ambient temperature is within the specified operating range.
• بې ځوابه تڼۍ: Try removing and reinserting the battery to reset the device.

که چیرې د دې ګامونو له پورته کولو وروسته هم ستونزې دوام ومومي، مهرباني وکړئ د پیرودونکو ملاتړ سره اړیکه ونیسئ.

9. تضمین او ملاتړ

Beetech products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the contact details provided with your purchase documentation or visit the official Beetech webسایټ. مهرباني وکړئ د تضمین ادعاوو لپاره د پیرود ثبوت وساتئ.