د NEC NP15LP پروجیکټر Lamp د بدلولو لارښود

1. پیژندنه

This manual provides essential instructions for the safe and effective replacement of the NEC NP15LP projector lamp assembly. The NP15LP is an original equipment manufacturer (OEM) bulb designed to meet the specific performance requirements of compatible NEC projectors, ensuring optimal brightness and picture quality.

د پروجیکټر مطابقت لرونکي ماډلونه: NEC M230X, M260W, M260X, M260XS, M271W, M271X, M300X, M300XG, M311X.

Figure 1: The NEC NP15LP projector lamp assembly, featuring the bulb housed within its protective casing. This image displays the front view د lamp, highlighting the optical component and mounting structure.

2. د خوندیتوب لارښوونې

Adhere to the following safety precautions to prevent injury or damage to the projector and lamp:

• Always power off the projector and unplug it from the electrical outlet before attempting any maintenance or lamp بدیل
• Allow the projector to cool down completely (at least 30 minutes) after use before handling the lamp. Hot lamps can cause severe burns.
• د نوي l شیشې سطحې ته لاس مه ورکوئamp bulb directly with bare hands. Oils from your skin can reduce lamp ژوند. که اړتیا وي، دستکشې یا پاک ټوکر وکاروئ.
• l سمبال کړئamp assembly with care. It contains a fragile glass bulb that can break if dropped or mishandled.
• هیڅکله پروجیکټر د l سره مه چلوئamp پوښ لرې شوی.
• زاړه l له مینځه وړلamp according to local environmental regulations. Projector lampپه دې کې پارې شته او باید د کور د عادي کثافاتو سره ونه غورځول شي.

3. Installation (Lamp بدیل)

Follow these steps to replace the projector lamp:

1. پروجکټور چمتو کړئ: Ensure the projector is powered off and unplugged. Allow it to cool down for at least 30 minutes.
2. L ومومئamp کمره: Refer to your projector's specific user manual to locate the lamp د کمپارټمنټ پوښ. دا معمولا د پروجیکټر په اړخ یا ښکته برخه کې وي.
3. L لرې کړئamp پوښ: Unscrew the screw(s) securing the lamp پوښ کړئ او په احتیاط سره پوښ ​​لرې کړئ.
4. زوړ L لرې کړئamp: هغه پیچونه خلاص کړئ چې l یې نیولی ويamp assembly in place. Carefully grasp the handle or designated area on the old lamp assembly and gently pull it straight out of the projector. Avoid forcing it.


شکل 2: اړخ view of the NP15LP lamp assembly, showing the electrical connectors. These connectors must align correctly when inserting the new lamp په پروجیکٹر کې

5. نوی L داخل کړئamp: Carefully insert the new NP15LP lamp assembly into the projector, ensuring it slides smoothly into position. Do not force it. Make sure the connectors align properly.
6. خوندي نوی Lamp: د نوي l د خوندي کولو لپاره پیچونه کلک کړئamp assembly firmly in place.
7. L بدل کړئamp پوښ: بیا سره نښلول lamp د کمپارټمینټ پوښ او د سکرو سره یې خوندي کړئ.
8. پاور آن او ری سیٹ Lamp ټایمر: Plug the projector back into the electrical outlet and power it on. It is crucial to reset the lamp timer in the projector's menu system. Refer to your projector's user manual for specific instructions on how to reset the lamp ټایمر. د ټایمر بیا تنظیمولو کې پاتې راتلل ممکن د غلط l پایله ولريamp life readings or premature lamp اخطارونه

4. عملیات

Once correctly installed and the lamp timer reset, the NP15LP lamp will function automatically as part of your NEC projector. The lamp provides the light source necessary for image projection. Its performance is optimized for the compatible NEC M-series projectors.

دamp's lifespan is monitored by the projector's internal timer. Regular monitoring of the lamp timer and adherence to replacement guidelines will ensure consistent image quality and prevent unexpected lamp failure during use.

5. ساتنه

Proper maintenance extends the life of your projector and ensures optimal lamp فعالیت:

• د هوا پاک فلټرونه: Regularly clean or replace the projector's air filters as recommended in your projector's manual. Clogged filters can lead to overheating, which significantly reduces lamp ژوند
• Allow Proper Cooling: Always allow the projector to complete its cooling cycle after shutdown before unplugging it or moving it. This helps to cool the lamp او داخلي برخې.
• Avoid Rapid Power Cycles: Frequent on/off cycles can stress the lamp and shorten its lifespan.
• د چاپیریال شرایط: Operate the projector in a well-ventilated area with stable temperature and humidity to prevent overheating.

6. ستونزه حل کول

که تاسو د l وروسته ستونزې سره مخ شئamp د بدیل لپاره، لاندې ټکي په پام کې ونیسئ:

• Lamp نه روښانه کول:
  • ډاډ ترلاسه کړئ چې lamp assembly is fully seated and secured with its screw(s).
  • l تایید کړئamp compartment cover is correctly installed and secured.
  • Check that the projector is properly plugged in and receiving power.
• Lamp Warning Indicator Still On:
  • ډاډ ترلاسه کړئ چې ایلamp timer has been reset in the projector's menu. This is a common oversight.
  • If the warning persists, consult your projector's user manual for specific error codes or indicators.
• Dim or Poor Image Quality:
  • ډاډ ترلاسه کړئ چې د پروجیکټر لینز پاک دی.
  • Check projector display settings (brightness, contrast).
  • Verify that the new lamp is an authentic NP15LP OEM bulb.

7. مشخصات

8. د تضمین معلومات

Specific warranty terms for the NEC NP15LP replacement lamp assembly are typically provided by the seller at the time of purchase. Please retain your proof of purchase and contact the vendor or manufacturer directly for detailed warranty coverage and claims procedures.

9. د پیرودونکي ملاتړ

For further assistance, technical support, or inquiries regarding the NEC NP15LP projector lamp, please contact your original point of purchase or refer to the official NEC support channels for your specific projector model.

You may find additional resources and contact information on the official NEC webسایټ: www.necdisplay.com/support