Bogen AT10A 10-Watt Attenuator User Manual

پیژندنه

This manual provides detailed instructions for the installation, operation, and maintenance of the Bogen AT10A 10-Watt Attenuator. The AT10A is designed to control the volume of individual speakers or groups of speakers in a constant voltage (70V or 25V) audio distribution system.

Please read this manual thoroughly before installation and operation to ensure proper use and to prevent damage to the unit or connected equipment.

محصول پای ته ورسیدview

انځور: مخکینۍ برخه view of the Bogen AT10A 10-Watt Attenuator. The unit features a silver faceplate with a black rotary volume knob. The knob is marked with numbers from 0 to 10, indicating volume levels. The Bogen logo is visible at the bottom center, and "AT-10A" is printed in the bottom right corner.

The Bogen AT10A is a wall-plate style attenuator, providing 10 steps of volume control plus an "OFF" position. It is suitable for use with 25V or 70V constant voltage speaker lines and has a power rating of 10 watts.

تنظیم او نصب کول

د خوندیتوب احتیاطونه

• Ensure all power to the audio system is disconnected before beginning installation.
• نصب کول باید د وړ پرسونل لخوا د محلي بریښنایی کوډونو سره سم ترسره شي.
• Do not exceed the maximum power rating of 10 watts.

پورته کول

1. The AT10A is designed to fit into a standard single-gang electrical box.
2. Secure the electrical box in the desired wall location.
3. Ensure adequate space for wiring connections behind the attenuator.

د تارونو نښلول

The AT10A features screw terminals for input and output connections. Refer to the diagram below for typical wiring.

• د ثابت حجم سره وصل کړئtage audio source (e.g., amplifier output) to the "INPUT" terminals.
• Connect the speaker(s) to be controlled to the "OUTPUT" terminals.
• Maintain correct polarity (+ to + and - to -) for all connections.
• ډاډ ترلاسه کړئ چې ټولې اړیکې خوندي دي او د لنډ سرکټ څخه پاکې دي.

(Note: A detailed wiring diagram would typically be provided here by the manufacturer. For this manual, general instructions are given.)

عملیاتي لارښوونې

The Bogen AT10A provides simple rotary control for adjusting the volume level of connected speakers.

1. پاور آن: After installation, restore power to the audio system.
2. د حجم تنظیمول: Rotate the knob clockwise to increase the volume and counter-clockwise to decrease it.
3. د حجم کچه: The knob features marked positions from 0 to 10. Position '0' represents the "OFF" or minimum volume setting, while '10' represents the maximum volume setting.
4. ښه سمون: Adjust the knob gradually to achieve the desired listening level.

ساتنه

The Bogen AT10A is designed for reliable, long-term operation with minimal maintenance.

• پاکول: To clean the faceplate, gently wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• معاینه: Periodically check the attenuator for any visible damage or loose connections. If any issues are found, disconnect power and address them promptly.
• د کارونکي د خدمت وړ برخې نشته: The internal components of the AT10A are not user-serviceable. Do not attempt to open or repair the unit. Refer servicing to qualified personnel.

د ستونزو حل کول

If troubleshooting steps do not resolve the issue, contact Bogen technical support or a qualified audio technician.

مشخصات

د ملاتړ او اړیکو معلومات

For technical assistance, product inquiries, or further information, please contact Bogen Communications, Inc.

• جوړونکی: Bogen Communications, Inc.
• Webسایټ: www.bogen.com (بېلګهample لینک، اصلي لینک ممکن توپیر ولري)
• د پیرودونکو خدمت: Refer to the official Bogen webد اوسني اړیکو توضیحاتو لپاره سایټ.

یادونه: د محصول مشخصات پرته له خبرتیا د بدلون تابع دي.