د پلسر PG10000B16 10,000W دوه ګونی تیلو پورټ ایبل جنراتور کارونکي لارښود

پیژندنه

This manual provides comprehensive instructions for the safe and efficient operation, setup, and maintenance of your Pulsar PG10000B16 10,000W Dual Fuel Portable Generator. Please read this manual thoroughly before operating the generator to ensure proper use and to prevent injury or damage.

کلیدي ځانګړتیاوې:

• 10,000W peak / 8,000W rated (gasoline) and 9,000W peak / 7,000W rated (LPG) power output.
• Equipped with a powerful 420cc, 4-stroke, OHV, air-cooled engine.
• Features a large 6.6-gallon fuel tank, providing up to 12 hours of continuous operation at half load on gasoline.
• Includes Switch & Go technology for seamless transitioning between LPG and gasoline fuel sources during operation.
• Electric push start with recoil backup for quick and easy startup.

شکل 1: پایview of the Pulsar PG10000B16 Dual Fuel Portable Generator.

تنظیم او مجلس

Before operating your generator, ensure it is properly assembled and prepared for use. This section outlines the initial setup steps.

1. خلاصول او معاینه کول:

• جنراتور په احتیاط سره د هغې له بسته بندۍ څخه لرې کړئ.
• Inspect for any shipping damage. Contact your retailer immediately if damage is found.
• ډاډ ترلاسه کړئ چې د بسته بندۍ په لیست کې لیست شوي ټول اجزا شتون لري.

2. Wheel and Handle Assembly:

Attach the wheels and drop-down handles to the generator frame. This process may be easier with two people due to the unit's weight. Ensure all fasteners are securely tightened.

Figure 2: The generator with its wheels and handles attached, ready for transport.

3. د انجن تیلو اضافه کول:

• د تیلو ډکولو کیپ/ډپسټک ومومئ.
• Add the recommended engine oil (refer to the oil type and capacity in the Specifications section) until it reaches the full mark on the dipstick. Do not overfill.

4. Fuel Connection:

• پټرول: د تېلو ټانک د تازه، بې سرې پټرول سره ډک کړئ. ډېر مه ډکوئ.
• LPG: Connect an LPG tank to the generator's LPG connection point using a suitable hose and regulator. Ensure all connections are secure and leak-free.

Figure 3: The control panel showing the fuel switch and various outlets.

5. د بیټرۍ پیوستون:

Connect the battery cables to the battery terminals, ensuring correct polarity (red to positive, black to negative). The generator features an electric start, powered by this battery.

عملیاتي لارښوونې

Follow these steps for safe and effective operation of your Pulsar Dual Fuel Generator.

1. د جنراتور پیل کول:

1. د سونګ توکو انتخاب: Use the "Switch & Go" lever on the control panel to select either ګازولین or پروپین (LPG).
2. چوک لیور: If starting a cold engine, move the choke lever to the "Closed" position. For a warm engine, leave it "Open".
3. د انجن سویچ: د انجن سویچ "آن" حالت ته واړوئ.
4. د بریښنا پیل: د انجن د پیل کولو پورې د بریښنایی پیل تڼۍ فشار ورکړئ او ونیسئ.
5. Recoil Start (Backup): If the electric start fails or the battery is low, pull the recoil start handle firmly and smoothly until the engine starts.
6. Once the engine starts, gradually move the choke lever to the "Open" position.

2. "Switch & Go" Dual Fuel Technology:

The generator's "Switch & Go" feature allows you to seamlessly switch between gasoline and LPG fuel sources even while the generator is running. To switch fuels, simply move the fuel selector lever to the desired fuel type. This can be done without shutting down the generator, providing flexibility during extended power outages.

3. Connecting Electrical Devices:

The generator provides multiple AC outlets (120V and 120V/240V) and a DC 12V 8.3A output for battery charging. Always ensure the total wattage of connected devices does not exceed the generator's rated running wattage.

• For sensitive electronics, it is recommended to use a quality surge protector or inverter-style power strip to protect against power fluctuations.
• Ensure all devices are turned off before plugging them into the generator.
• Never overload the generator.

Figure 4: The control panel displaying the engine switch, hour meter, DC 12V 8.3A output, and multiple AC 120V and AC 120V/240V outlets.

4. د جنراتور بندول:

1. د جنراتور څخه ټول بریښنایی بارونه جلا کړئ.
2. جنراتور ته اجازه ورکړئ چې د څو دقیقو لپاره پرته له بار څخه چل شي ترڅو سړه شي.
3. د انجن سویچ "بند" حالت ته واړوئ.
4. If storing for an extended period, turn off the fuel valve (for gasoline) or close the LPG tank valve.

ساتنه

Regular maintenance is crucial for the longevity and reliable performance of your generator. Always ensure the generator is turned off and cooled down before performing any maintenance.

1. Engine Oil:

• د هر استعمال دمخه د تیلو کچه وګورئ.
• Change oil after the first 20 hours of operation, then every 100 hours or annually, whichever comes first.

2. Air Filter:

• Inspect the air filter every 50 hours or monthly.
• Clean or replace if dirty.

3. سپارک پلګ:

• Inspect and clean the spark plug every 100 hours or annually.
• که خراب شوی یا خراب شوی وي، بدل یې کړئ.

4. Fuel System:

• For gasoline, use a fuel stabilizer if storing for more than 30 days.
• Drain the carburetor and fuel tank if storing for longer periods without stabilizer.
• For LPG, ensure the tank and connections are free from leaks.

5. ذخیره کول:

• جنراتور په پاکه، وچه او ښه هوا لرونکې سیمه کې وساتئ.
• Cover the generator to protect it from dust and moisture.

د ستونزو حل کول

This section provides solutions to common operational issues. If you encounter problems not listed here, or if the suggested solutions do not resolve the issue, contact customer support.

Generator Will Not Start:

• د سونګ توکو نشته: Check gasoline level or LPG tank connection and supply.
• د تیلو والو: ډاډ ترلاسه کړئ چې د سونګ والو په "آن" حالت کې دی.
• ټکان: Adjust the choke lever as appropriate for a cold or warm engine.
• د انجن سویچ: Verify the engine switch is in the "ON" position.
• سپارک پلګ: د چنګک پلګ د خرابوالي یا زیان لپاره معاینه کړئ.
• Battery (Electric Start): Check battery charge. If low, use the recoil start.

د بریښنا تولید نشته:

• سرکټ ماتونکي: وګورئ چې ایا په کنټرول پینل کې کوم سرکټ ماتونکي ټکر شوي دي. که اړتیا وي نو بیا تنظیم کړئ.
• اوورلوډ: Reduce the total load connected to the generator.
• اړیکې: Ensure all power cords are securely plugged into the generator outlets.

Engine Runs Poorly:

• Stale Fuel: Use fresh fuel. Drain old fuel if necessary.
• د هوا فلټر: Clean or replace a dirty air filter.
• سپارک پلګ: Inspect and clean or replace the spark plug.

مشخصات

Figure 5: Product dimensions of the Pulsar PG10000B16 generator.

تضمین او ملاتړ

For detailed warranty information, please refer to the warranty card included with your product or visit the official Pulsar website. If you require technical assistance, replacement parts, or have questions regarding your generator, please contact Pulsar customer support.

د اړیکو معلومات: Refer to your product packaging or the official Pulsar webد پیرودونکو د ملاتړ د اړیکو د تازه معلوماتو لپاره سایټ.