د BEMKO B62-TSMD20 TS SCHUKO پلگ ان ټایمر کارونکي لارښود

1. پیژندنه

This manual provides detailed instructions for the safe and efficient use of your BEMKO B62-TSMD20 TS SCHUKO Plug-in Timer. Please read this manual thoroughly before installation and operation to ensure proper function and to prevent damage or injury. This device is designed to automatically switch electrical appliances ON and OFF at pre-set times over a 24-hour period.

2. د خوندیتوب معلومات

• Always disconnect power before attempting any installation, maintenance, or cleaning.
• Do not exceed the maximum load rating of 3500W or 16A. Overloading can cause damage to the device and connected appliances, and may pose a fire hazard.
• Ensure the timer is plugged into a properly grounded 230V/50Hz electrical outlet.
• دا وسیله یوازې د کور دننه کارونې لپاره ډیزاین شوې ده. دا د اوبو، رطوبت، یا ډیرې تودوخې سره مه مخ کوئ.
• د وسیلې د خلاصولو یا ترمیم کولو هڅه مه کوئ. ټولې خدمتونه وړ پرسونل ته راجع کړئ.
• د ماشومانو د لاسرسي څخه لرې وساتئ.

3. محصول ختم شوview

The BEMKO B62-TSMD20 is an analog plug-in timer designed for simple and reliable control of electrical devices. It features a 24-hour dial for setting daily programs and a manual override switch.

شکل 1: مخکی view of the BEMKO B62-TSMD20 TS SCHUKO Plug-in Timer. The image displays the timer with a central Schuko type electrical socket. This socket is surrounded by a rotating 24-hour dial marked with numbers from 1 to 24 (or AM/PM indications) and small, push-down pins along its circumference for setting time intervals. A manual override switch is visible on the right side of the white casing.

مهمې برخې:

• Schuko Socket: د کنټرول لپاره د وسیلې د پلګ کولو لپاره.
• ۲۴ ساعته ډایل: Rotates clockwise, marked with hours and minutes.
• د پروګرام پنونه: Small segments around the dial, each representing 15 minutes.
• د لاسي اوورایډ سویچ: Allows for continuous ON, continuous OFF, or timer-controlled operation.

4. ترتیب کول

1. نښلول: Insert the BEMKO B62-TSMD20 timer into a standard 230V/50Hz wall outlet.
2. اوسنی وخت ټاکل: Rotate the 24-hour dial clockwise until the current time aligns with the arrow or marker on the timer's body. Ensure you distinguish between AM and PM hours (e.g., 3 PM is 15:00).
3. پروګرام ترتیب کړئ:
   • Each segment (pin) on the dial represents 15 minutes.
   • To set an 'ON' period, push the corresponding pins downwards.
   • To set an 'OFF' period, leave the corresponding pins in the upward position.
   • د مثال لپارهample, to turn an appliance ON from 7:00 AM to 8:00 AM, push down all four pins between the 7 and 8 o'clock marks.
4. وسیله وصل کړئ: Plug the appliance you wish to control into the Schuko socket on the front of the timer.

5. عملیاتي لارښوونې

د لاسي اوورایډ سویچ:

The manual override switch, typically located on the side of the timer, allows you to control the power output independently of the set program. It usually has three positions:

• د ټایمر حالت (د ساعت آیکون): The timer operates according to the set program (pins pushed down/up).
• Always ON (I Icon): The power output is continuously ON, regardless of the program settings.
• Always OFF (O Icon): The power output is continuously OFF, regardless of the program settings.

Select the desired mode by sliding the switch to the appropriate position.

6. ساتنه

• پاکول: Disconnect the timer from the power outlet before cleaning. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners, abrasives, or solvents.
• ذخیره کول: ټایمر په یخ او وچ ځای کې وساتئ کله چې نه کارول کیږي.
• The BEMKO B62-TSMD20 contains no user-serviceable parts. Do not attempt to disassemble the unit.

7. ستونزه حل کول

• Appliance not turning ON/OFF:
  • Check if the timer is securely plugged into the wall outlet.
  • Verify that the appliance is correctly plugged into the timer's socket.
  • Ensure the manual override switch is set to the 'Timer Mode' (clock icon).
  • Confirm that the program pins are correctly set for the desired ON/OFF times.
  • Check if the current time on the dial is accurately set.
• ټایمر نه پرمختګ کوي:
  • ډاډ ترلاسه کړئ چې ټایمر د دیوال له ساکټ څخه بریښنا ترلاسه کوي.
  • If the timer has been unplugged for an extended period, it may need to be reset to the current time once power is restored.
• ډیر ګرمول:
  • Immediately unplug the timer and the connected appliance.
  • Ensure the connected appliance's power consumption does not exceed the timer's maximum load rating (3500W / 16A).

8. مشخصات

9. تضمین او ملاتړ

For warranty information, technical support, or service inquiries regarding your BEMKO B62-TSMD20 TS SCHUKO Plug-in Timer, please contact your retailer or the manufacturer, Bemko, directly. Please retain your proof of purchase for warranty claims.