1. پیژندنه
This instruction manual provides detailed information for the Graco 241623 Pump Repair Kit. This kit contains genuine Graco replacement parts essential for maintaining the performance and longevity of your Graco 50:1 Fireball Pumps and Dynastar 10:1 Grease Pumps. Adherence to these instructions ensures proper repair and safe operation.
۱.۱. د خوندیتوب مهم معلومات
Always use genuine Graco parts and accessories.
For detailed warnings and instructions specific to your pump model, refer to the following manuals:
- For 50:1 Fire-Ball Pumps: Manual Number 308883
- For 10:1 Dyna-Star Pumps: Manual Number 312350
Ensure all safety precautions outlined in your pump's primary manual are followed during the repair process. Disconnect power and relieve pressure before beginning any maintenance.
Image: Back of the repair kit packaging, displaying important safety instructions and initial diagrams for pump repair.
3. د کټ مینځپانګه
The Graco 241623 Pump Repair Kit includes the following components:
Image: A close-up of the individual components within the repair kit, including seals, bearings, and balls.
| Ref. | تفصیل | مقدار |
|---|---|---|
| 1 | SEAL, throat | 1 |
| 2* | BEARING, piston | 1 |
| 3^ | SEAL, piston | 1 |
| 4 | بال | 2 |
| 5 | SEAL, gasket | 2 |
| 6 | BEARING, shovel rod | 1 |
| 7^ | SEAL, shovel rod | 1 |
*Used in Series A pumps only.
^Pump series is indicated by the last letter of the series code marked on the air motor muffler plate.
4. مطابقت
This Graco 241623 Pump Repair Kit is specifically designed for use with:
- Graco 50:1 Fireball Pumps
- Graco Dynastar 10:1 Grease Pumps
Ensure your pump model matches these specifications before attempting repair.
5. Repair Procedure
The following diagrams illustrate the general assembly and component placement for the 50:1 Fire-Ball pump. Refer to your specific pump's manual (308883 or 312350) for detailed disassembly and reassembly steps.
Image: Detailed instruction sheet with exploded view diagrams for pump repair, including part references.
Key Assembly Notes:
- Seal Orientation: Pay close attention to the orientation of seals. Diagrams indicate Lips face up او Lips face down for correct installation. Incorrect orientation can lead to leaks or improper pump function.
- د اجزاو ځای پرځای کول: Use the reference numbers in the diagram to match each kit component to its correct position within the pump assembly.
- Series A Pumps: Note that specific parts (e.g., BEARING, piston (2*) and SEAL, piston (3^), SEAL, shovel rod (7^)) are used exclusively in Series A pumps. Verify your pump's series code on the air motor muffler plate.
Always ensure all components are clean and free of debris before reassembly. Apply appropriate lubricants as specified in your pump's main manual.
6. مشخصات
| مشخصات | تفصیل |
|---|---|
| جوړونکی | Graco Mfg |
| برخه شمیره | 241623 |
| د توکي ماډل شمیره | 241623 |
| د توکي وزن | 2.08 اونس |
| د محصول ابعاد | 9 x 7 x 2 انچه |
| سټایل | د ترمیم کټ |
| UPC | 614042840847 |
| نیټه لومړی شتون لري | د ۲۰۲۴ کال د جنورۍ ۲۸ مه |
7. د جوړونکي معلومات
For warranty information, technical support, or further inquiries, please contact Graco directly. Always refer to your original product documentation for specific warranty terms.
ګراکو شرکت.
PO بکس 1441
منیاپولیس ، MN 55440-1441
USA
Copyright © 2000, Graco Inc. Registered to I.S. EN ISO 9001
