د میګر DET14C ډیجیټل ځمکې ازموینه Clamp- د ځمکې پر وړاندې د مقاومت میټر کارونکي لارښود

1. پیژندنه

The Megger DET14C is a sophisticated clamp-on ground resistance tester engineered for precise and safe measurement of earth/ground resistance in multi-loop installations. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your DET14C meter.

کلیدي ځانګړتیاوې:

• Large elliptical clamp design for easy access.
• Smooth mating surfaces on the clamp head to prevent dirt accumulation.
• CATIV 600 V operation for enhanced safety.
• Noise filter function for accurate readings in electrically noisy environments.
• Intelligent data hold function and data storage with time- and date-stamped results.

۳. د بسته بندۍ خلاصول او ابتدايي تنظیم کول

۲.۱ د وسیلې خلاصول

Carefully unpack the Megger DET14C from its packaging. Verify that all components are present and undamaged. The standard package includes:

• Megger DET14C Unit
• د لارښوونې لارښود

Figure 1: Megger DET14C in its protective carrying case, alongside a check loop.

2.2 د بیټرۍ نصب کول

The DET14C is battery powered. To install or replace batteries:

1. د واحد په شا کې د بیټرۍ کڅوړه ومومئ.
2. د کڅوړې پوښ خلاص کړئ.
3. اړین بیټرۍ دننه کړئ، سم قطبي حالت وګورئ.
4. په خوندي ډول د بیټرۍ پوښ پوښ پوښ کړئ.

3. عملیاتي لارښوونې

3.1 اوورview د کنټرولونو

Figure 2: Close-up of the DET14C controls and display.

The DET14C features an intuitive interface:

• روټري ډایل: Used to select measurement modes (e.g., Ω for resistance, A for current) and power the unit ON/OFF.
• د LCD نندارې: د اندازه کولو لوستل، د بیټرۍ حالت، او نور شاخصونه ښیې.
• تڼۍ ونیسئ: په ښودنه کې اوسنی لوستل کنګل کوي.
• د فعالیت (Fn) تڼۍ: Activates secondary functions or settings.
• د نیویګیشن تڼۍ: Used for navigating menus and confirming selections (e.g., OK button).

۳.۱ د اندازه کولو ترسره کول

To perform an earth/ground resistance measurement:

1. Ensure the unit is powered ON by rotating the dial to the desired measurement mode (Ω).
2. cl خلاص کړئamp د لیور په فشارولو سره ژامې.
3. cl ځای پر ځای کړئamp around the earth conductor or ground loop to be measured, ensuring the jaws close completely and smoothly. The flat core ends are designed for optimal contact.
4. The meter will automatically begin measuring. The resistance value will be displayed on the LCD.
5. If operating in an electrically noisy environment, activate the Noise Filter Function as per the detailed instructions in the full user manual to ensure stable readings.
6. To save a reading, use the data storage function. Readings are time and date stamped for easy record-keeping.

The DET14C can measure ground resistance within a range of 0.05 Ω to 1500 Ω, with varying accuracy across sub-ranges:

• 0.05 Ω - 0.99 Ω
• 1.00 Ω - 9.99 Ω
• 10.0 Ω - 99.9 Ω
• 100.0 Ω - 199.9 Ω
• 200 Ω - 400 Ω
• 400 Ω - 600 Ω
• 600 Ω - 1200 Ω
• 1200 Ω - 1500 Ω

4. ساتنه

4.1 پاکول

To maintain accuracy and prolong the life of your DET14C, regularly clean the unit, especially the clamp jaws and flat core ends. Use a soft, dry cloth. For stubborn dirt, a slightly damp cloth may be used, but ensure no moisture enters the device. Do not use abrasive cleaners or solvents.

4.2 د بیټرۍ بدلول

When the low battery indicator appears on the display, replace the batteries promptly to ensure continued accurate operation. Refer to Section 2.2 for battery installation instructions.

4.3 ذخیره کول

When not in use, store the Megger DET14C in its protective carrying case in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries to prevent leakage.

5. ستونزه حل کول

This section addresses common issues you might encounter with your Megger DET14C. For more detailed troubleshooting, refer to the comprehensive user manual.

عام مسایل:

• ځواک نشته: د بیټرۍ نصب کول وګورئ او ډاډ ترلاسه کړئ چې بیټرۍ ختمې شوې نه دي.
• ناسم لوستل: کل ډاډ ترلاسه کړئamp jaws are fully closed and clean. Verify the conductor is properly positioned within the clamp. Activate the noise filter function if operating in an electrically noisy environment.
• ښودنه ځواب نه ورکوي: Try turning the unit off and on again. If the issue persists, replace batteries.

If problems persist after attempting these steps, contact Megger customer support or a qualified service technician.

6. مشخصات

The following are the technical specifications for the Megger DET14C Digital Earth Test Clamp-On Ground Resistance Meter:

7. تضمین او ملاتړ

7.1 د تضمین معلومات

The Megger DET14C is covered by a manufacturer's warranty. For specific details regarding warranty terms, duration, and conditions, please refer to the warranty card included with your product or visit the official Megger webسایټ. د تضمین ادعاوو لپاره د پیرود ثبوت وساتئ.

7.2 د پیرودونکي ملاتړ

For technical assistance, service, or inquiries not covered in this manual, please contact Megger customer support. Contact information can typically be found on the Megger website or in the full user manual provided with your device.