Einhell TC-SY 400 P Electric Paint Gun Instruction Manual

1. د خوندیتوب معلومات

تل د دې بریښنا وسیلې سره چمتو شوي ټول خوندیتوب اخطارونه، لارښوونې، انځورونه او مشخصات ولولئ او پوه شئ. د لاندې لیست شوي ټولو لارښوونو په تعقیب کې پاتې راتلل ممکن د بریښنا شاک، اور، او/یا جدي ټپي کیدو لامل شي.

• د کاري ساحې خوندیتوب: د کار ساحه پاکه او ښه روښانه وساتئ. د بریښنا وسایل په چاودیدونکو فضا کې مه کاروئ، لکه د اور اخیستونکي مایعاتو، ګازونو یا دوړو په شتون کې.
• شخصي خوندیتوب: Always wear appropriate personal protective equipment, including safety glasses, a respirator mask, gloves, and protective clothing. Avoid accidental starting. Ensure the switch is in the off-position before connecting to power, picking up, or carrying the tool.
• بریښنایی خوندیتوب: د بریښنا وسایل باید د ساکټ سره سمون ولري. هیڅکله پلګ په هیڅ ډول مه بدلوئ. د بریښنا وسایل باران یا لوند شرایطو ته مه ښکاره کوئ.
• کیمیاوي خوندیتوب: Always refer to the safety data sheet (SDS) for the material being sprayed. Ensure adequate ventilation when spraying paints, lacquers, or stains.
• ماشومان او نندارچیان: د بریښنا وسیله چلولو پرمهال ماشومان او لیدونکي لرې وساتئ. ګډوډي کولی شي ستاسو د کنټرول له لاسه ورکولو لامل شي.

2. محصول ختم شوview

The Einhell TC-SY 400 P is a lightweight and convenient electric paint spray gun designed for small to medium-sized workspaces. It is suitable for spraying lacquers and glazes, offering precise control for various applications.

2.1 اصلي برخې

• Paint Spray Gun Unit
• Paint Container (800 ml capacity)
• Spray Head (removable)
• Nozzles (2.5 mm black, 2 mm red replacement)
• د ویسکوسیټي اندازه کولو کپ
• د پاکولو برش
• Purification Needle for Spray Nozzle
• Storage Lid for Paint Container

Image: The Einhell TC-SY 400 P Electric Paint Gun, a handheld unit with a red and black body and a white paint container attached.

Image: Included accessories: a cleaning brush, a purification needle, two nozzles (black and red), a viscosity measuring cup, and a storage lid for the paint container.

3. ترتیب کول

3.1 Preparing the Paint Material

1. Ensure the paint, lacquer, or stain is suitable for spraying. Refer to the material manufacturer's instructions.
2. Use the provided viscosity measuring cup to check the material's viscosity. If too thick, thin the material according to the manufacturer's recommendations.
3. Filter the prepared material to remove any lumps or impurities that could clog the nozzle.

3.2 Assembling the Paint Gun

1. Ensure the paint gun is unplugged from the power supply.
2. Select the appropriate nozzle for your material and desired spray pattern.
3. Attach the spray head to the main unit by twisting it securely.
4. Fill the paint container with the prepared material. Do not overfill.
5. Screw the filled paint container onto the spray head unit until it is firmly attached.

Image: An exploded diagram showing the main components of the Einhell TC-SY 400 P paint gun, including the motor unit, spray head, nozzle, and paint container, illustrating assembly.

4. عملیاتي لارښوونې

4.1 Adjusting Paint Flow

The paint flow can be adjusted to suit the material and desired coverage. Rotate the paint flow regulation knob to increase or decrease the material output.

Image: A graphic illustrating the paint flow regulation mechanism, showing an arrow indicating rotation to adjust the flow from the paint container.

4.2 Adjusting Spray Pattern

The air outlet cap can be adjusted to achieve vertical, horizontal, or circular spray patterns. Rotate the air cap to align the desired pattern with the nozzle.

• عمودی جټ: د افقی سطحو لپاره.
• افقي جټ: د عمودی سطحو لپاره.
• Circular Jet: د کوچنیو سیمو یا کونجونو لپاره.

Image: A diagram showing three different air cap orientations and their corresponding spray patterns: horizontal, vertical, and circular.

۵.۲ د سپرې کولو تخنیک

1. Hold the paint gun approximately 15-30 cm (6-12 inches) from the surface.
2. د یو مساوي پای لپاره یو ثابت واټن او سرعت وساتئ.
3. Start spraying off the workpiece and move across, releasing the trigger off the workpiece to avoid overspray and drips.
4. Apply thin, even coats rather than one thick coat. Allow adequate drying time between coats.

Image: A person wearing safety glasses and a mask, using the Einhell TC-SY 400 P paint gun to spray a wooden garden bench outdoors.

5. ساتنه او پاکول

Proper cleaning after each use is crucial for the longevity and performance of your paint gun.

5.1 Immediate Cleaning

1. Unplug the paint gun from the power supply.
2. Empty any remaining material from the paint container.
3. Fill the container with an appropriate cleaning solution (water for water-based paints, solvent for oil-based paints/lacquers).
4. د پاکولو محلول د ټوپک له لارې تر هغه وخته پورې سپری کړئ چې پاک شي.

۷.۲ تفصيلي پاکول

1. Remove the paint container and spray head.
2. Disassemble the spray head, including the nozzle and air cap.
3. Use the provided cleaning brush and purification needle to thoroughly clean all components that came into contact with the material. Pay special attention to the nozzle and air cap holes.
4. Rinse all parts with clean water or appropriate solvent.
5. Allow all components to dry completely before reassembly or storage.

5.3 ذخیره کول

Once clean and dry, reassemble the paint gun. The integrated suspension system allows for easy storage in a minimal space. Store the unit in a dry, dust-free environment, out of reach of children.

6. ستونزه حل کول

د عامو ستونزو او د هغوی د حل لارو لپاره لاندې جدول ته مراجعه وکړئ.

7. مشخصات

8. تضمین او ملاتړ

د تضمین معلوماتو لپاره، مهرباني وکړئ د خپل محصول سره شامل شوي تضمین کارت ته مراجعه وکړئ یا رسمي اینهیل ته مراجعه وکړئ website. For technical support, spare parts, or service inquiries, please contact Einhell customer service directly. Contact details can typically be found on the manufacturer's webسایټ یا په اصلي بسته بندۍ کې.