د فعالیت وسیله M982 د درنو دندو اغیزو درجې CrMo سټیل لوګ نټ ریموور لارښود لارښود

پیژندنه

This manual provides instructions for the safe and effective use of the Performance Tool M982 Heavy Duty Impact-Grade CrMo Steel Lug Nut Remover. This tool is designed for removing stubborn, rounded, stripped, or damaged lug nuts, including locking lug nuts where the key is lost or damaged.

The M982 lug nut remover is constructed from heavy-duty impact-grade CrMo steel, ensuring durability and resistance to splitting or cracking under pressure. It features an oil-resistant black phosphate finish to prevent corrosion and extend tool life. The socket is designed with a 1/2-inch drive for compatibility with standard ratchets or impact wrenches.

Image: The Performance Tool M982 lug nut remover socket, showing its black phosphate finish and engraved model number.

د خوندیتوب معلومات

د دې وسیلې کارولو پر مهال تل لاندې خوندیتوب احتیاطي تدابیر په پام کې ونیسئ:

• Wear appropriate personal protective equipment, including safety glasses, to protect against flying debris.
• Ensure the vehicle is properly supported on a level surface using jack stands before attempting to remove wheels or lug nuts.
• Use the correct size socket for the lug nut. The M982 is designed for 13/16 inch and some rounded 21mm lug nuts.
• Do not use damaged or worn tools. Inspect the lug nut remover for any signs of wear or damage before each use.
• Use with a compatible 1/2-inch drive ratchet or impact wrench. Do not exceed the torque rating of your drive tool.
• Keep hands and clothing clear of rotating parts when using an impact wrench.
• This tool is designed for removal only. Do not use this tool for installing lug nuts.

اجزا

The Performance Tool M982 package includes:

• One (1) 13/16" Lug Nut Remover Socket (Model M982)

Image: The M982 lug nut remover socket displayed in its retail packaging, highlighting its 13/16" SAE size and 1/2" drive compatibility.

چمتو کول

Before using the lug nut remover, ensure you have the following:

• A 1/2-inch drive impact wrench or heavy-duty ratchet.
• د خوندیتوب شیشې.
• Gloves (optional, but recommended for grip and protection).

ضمیمه:

1. Align the square drive opening of the M982 lug nut remover with the 1/2-inch drive anvil of your impact wrench or ratchet.
2. Push the socket firmly onto the anvil until it clicks into place or is securely seated. Ensure it is fully engaged to prevent slippage during operation.

عملیاتي لارښوونې

This tool is designed to remove lug nuts that are worn, stripped, damaged, or locking lug nuts for which the key is unavailable. It is specifically sized for 13/16 inch and some rounded 21mm lug nuts.

1. موټر چمتو کړئ: Safely lift the vehicle and support it with jack stands. Ensure the wheel is stable.
2. سمه وسیله غوره کړئ: Confirm the lug nut remover is the correct size (13/16 inch or 21mm) for the lug nut you intend to remove.
3. ساکټ ځای په ځای کړئ: Place the M982 lug nut remover squarely over the damaged or locking lug nut. Apply firm, even pressure to ensure the internal spiral flutes of the socket engage with the lug nut. A light tap with a hammer on the end of the socket may help it bite into the lug nut, especially for severely damaged ones.
4. Operate the Drive Tool:
   • If using an impact wrench, set it to the reverse (loosening) direction. Apply power in short bursts, allowing the socket to grip and turn the lug nut.
   • If using a ratchet, turn it counter-clockwise to loosen the lug nut. Apply steady, increasinد ځواک.
5. Remove the Lug Nut: Continue to apply force until the lug nut begins to turn. Once loose, remove it completely.
6. Extract the Lug Nut from the Socket: After removal, the lug nut may be tightly lodged within the remover socket. To extract it, you may need to use a punch or a similar tool to tap the lug nut out from the drive end of the socket. This tool is designed for removal, and the lug nut may be difficult to remove from the socket due to the gripping action.

Image: A mechanic utilizing an impact wrench with a lug nut remover socket to remove a wheel from a vehicle, demonstrating the tool in action.

انځور: نږدې انځور view of a person operating an impact wrench with the lug nut remover socket on a car wheel, illustrating the application of the tool.

ساتنه

Proper maintenance ensures the longevity and performance of your M982 lug nut remover:

• پاکول: After each use, wipe the socket clean of any dirt, grease, or debris.
• ذخیره کول: Store the tool in a dry environment to prevent rust. The black phosphate finish is oil-resistant, which helps protect against corrosion.
• معاینه: Periodically inspect the socket for signs of wear, cracks, or damage. Discontinue use if any damage is observed.

د ستونزو حل کول

مشخصات

تضمین او ملاتړ

The Performance Tool M982 Lug Nut Remover Socket comes with a د ټول عمر تضمین. For warranty claims or technical support, please refer to the contact information provided on the product packaging or visit the official Performance Tool webسایټ

For additional information or to explore other Performance Tool products, visit the Performance Tool Store.