پیژندنه
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Pro-Ject Essential III Beatles Turntable. Please read this manual carefully before using the product to ensure proper function and longevity.
د بسته محتويات
د پیل کولو دمخه، مهرباني وکړئ ډاډ ترلاسه کړئ چې لاندې لیست شوي ټول توکي ستاسو په کڅوړه کې شتون لري:
- Ortofon OM10 Phono Cartridge
- 15 V DC Universal Power Supply
- Hinged Acrylic Dust Cover
- Connect It E Audio Cable
- 7" 45 RPM Adaptor
Image: The Pro-Ject Essential III Beatles Turntable, showcasing its unique design and components.
چمتو کول
Follow these steps to set up your turntable for optimal performance:
- بسته بندي کول: په احتیاط سره د بسته بندۍ څخه ټولې برخې لرې کړئ. د راتلونکي لیږد یا ذخیره کولو لپاره بسته بندي وساتئ.
- ځای په ځای کول: Place the turntable on a stable, level surface, away from direct sunlight, heat sources, and strong vibrations. Ensure adequate ventilation.
- د پلیټ نصبول: Gently place the acrylic platter onto the spindle. Ensure it sits flush.
- د کمربند نصبول: Carefully loop the silicone drive belt around the sub-platter and the motor pulley. Ensure the belt is not twisted.
- Cartridge Alignment (Pre-mounted): The Ortofon OM10 cartridge comes pre-mounted. Verify it is securely attached to the tonearm.
- Tonearm Balance: Adjust the counterweight at the rear of the tonearm until the tonearm floats freely and horizontally. Then, set the tracking force according to the cartridge manufacturer's specifications (typically 1.5g for Ortofon OM10).
- د سکیټینګ ضد سمون: Attach the anti-skating weight to the designated groove on the tonearm support.
- د دوړو پوښ: Attach the hinged acrylic dust cover to the rear hinges of the turntable.
- اړیکې: Connect the Connect It E Audio Cable from the turntable's RCA outputs to your phono preampژوندی کوونکی یا amplifier's phono input. Connect the 15V DC universal power supply to the turntable and then to a power outlet.
Image: Detail of the motor pulley and belt drive system.
Image: The tonearm and pre-mounted Ortofon OM10 cartridge.
عملیاتي لارښوونې
To play a record:
- پاور آن: Flip the power switch located on the side of the plinth to the 'On' position. The platter will begin to spin.
- سرعت غوره کړئ: The turntable supports 33 1/3 RPM and 45 RPM. To change speed, manually move the drive belt to the appropriate step on the motor pulley. Use the 7" 45 RPM adaptor for singles.
- د ځای ریکارډ: خپل د وینیل ریکارډ په احتیاط سره په تالی کې ځای په ځای کړئ.
- ټونرما پورته کول: د ټونارم پورته کولو لپاره د ټونر لفټ لیور وکاروئ.
- د سټایلس موقعیت: ټونرمام په نرمۍ سره د ریکارډ د مطلوب پیل شوي نالی په سر کې حرکت وکړئ.
- ښکته ټونرما: Slowly lower the tonearm using the lift lever. The stylus will descend onto the record, and playback will begin.
- د پلې بیک پای: At the end of the record, use the tonearm lift lever to raise the tonearm, then return it to its rest. Flip the power switch to 'Off'.
Image: Power switch location on the turntable plinth.
ساتنه
Regular maintenance ensures the longevity and optimal performance of your turntable:
- د دوړو پوښ: Always use the dust cover when the turntable is not in use to protect it from dust and debris.
- Cleaning the Plinth: Wipe the plinth with a soft, dry, lint-free cloth. Avoid using abrasive cleaners or solvents.
- د سټایلس پاکول: Use a dedicated stylus brush or cleaning fluid to gently clean the stylus before or after each play. Brush from back to front.
- د پاکولو ریکارډونه: Keep your records clean using a record brush or a record cleaning machine to prevent dust from accumulating on the stylus.
- د کمربند معاینه: Periodically inspect the drive belt for wear or stretching. Replace if necessary.
د ستونزو حل کول
که تاسو د خپل ټرن میز سره ستونزې سره مخ شئ، لاندې عام ستونزو او حلونو ته مراجعه وکړئ:
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| No power / Turntable not spinning | Power cable disconnected; Power outlet faulty; Power switch off. | Check power connections; Try a different outlet; Ensure power switch is 'On'. |
| هیڅ غږ نشته یا ډیر ټیټ غږ | ناسم ان پټ په کې غوره شوی دی amplifier; Cartridge not connected properly; Amplifier volume too low; No phono preampلايف | Select correct input (Phono); Check cartridge wiring; Increase volume; Ensure a phono preamplifier is used if your amplifier lacks one. |
| تحریف شوی غږ / پریښودل | Stylus dirty or worn; Tracking force incorrect; Anti-skating incorrect; Record dirty or damaged. | Clean stylus; Re-adjust tracking force and anti-skating; Clean or replace record. |
| د خندا شور | ځمکني تار نه وصل شوی؛ د نورو برقیاتو مداخله. | Ensure ground wire is connected to amplifier's ground terminal; Move turntable away from other electronics. |
| Speed inconsistency | Drive belt worn or improperly seated; Motor issue. | Check and re-seat drive belt; Replace belt if worn. If problem persists, contact support. |
مشخصات
| فیچر | تفصیل |
|---|---|
| د ماډل نوم | Essential III Sgt. Pepper |
| برانډ | پرو-جیکٹ |
| ابعاد (L x W x H) | 12.99 x 16.54 x 4.41 انچه |
| د توکي وزن | ۱.۹ پونډه (تقریبا ۰.۸۶ کیلوګرامه) |
| د ارتباط ټیکنالوژي | RCA |
| مواد | انجنیر شوی لرګی، پلاستیک |
| د موټر چلولو سیسټم | بیلټ ډرایو د همغږۍ موټرو او سیلیکون بیلټ سره |
| تالی | Acrylic (Acryl it E upgrade) |
| ټونارم | 8.6" Aluminium Tonearm |
| کارتوس | Pre-mounted Ortofon OM10 |
| په حالت کې د بریښنا مصرف | ۴۵ واټه |
تضمین او ملاتړ
For warranty information and technical support, please refer to the official Pro-Ject Audio Systems webسایټ یا خپل مجاز پلورونکي سره اړیکه ونیسئ. د تضمین ادعاوو لپاره د پیرود ثبوت وساتئ.
جوړونکی: پرو جاکټ آډیو سیسټمونه
لومړی شتون لري: د می 31، 2017
د راستنیدو پالیسي: 30-day refund/replacement (as per Amazon's policy at time of data retrieval).
د نورو مرستو لپاره، لیدنه وکړئ په ایمیزون کې د پرو-جیکټ پلورنځی.