1. پیژندنه
This manual provides comprehensive instructions for the installation, operation, and maintenance of the TACO ED-501-AL Grade 1 Rim Surface Exit Device. This device is designed for commercial applications, offering a durable and efficient solution for emergency exits.
The ED-501-AL is a Grade 1 certified product, ensuring high durability and reliability for demanding environments such as offices, factories, and storehouses. Its design allows for a closer integration with the door, minimizing obstruction.
2. د خوندیتوب معلومات
مهم: Read all instructions carefully before installation and use. Failure to follow these instructions may result in property damage or injury.
- د نصبولو پرمهال تل مناسب شخصي محافظتي تجهیزات (PPE) واغوندئ، پشمول د خوندیتوب عینکې او دستکشې.
- Ensure the door and frame are structurally sound and capable of supporting the device.
- Do not modify the device in any way, as this may compromise its functionality and safety ratings.
- ماشومان او غیر مجاز پرسونل د نصب کولو ساحې څخه لرې وساتئ.
3. د بسته محتويات
د نصبولو پیل کولو دمخه ډاډ ترلاسه کړئ چې ټولې برخې شتون لري:
- TACO ED-501-AL Rim Surface Exit Device
- Lock front filler
- Strike filler
- د جنس بولټونه
- د سکرو او هارډویر نصب کول
- د نصبولو لارښوونې (دا لارښود)
Figure 3.1: Included hardware components, including various screws, fillers, and a strike plate.
4. مشخصات
| فیچر | تفصیل |
|---|---|
| د ماډل شمیره | ED-501-AL |
| مواد | المونیم |
| ختم | لکیر شوی المونیم |
| د دروازې ضخامت مطابقت | 1-3/4" to 2 inches |
| Door Width Compatibility | 26" to 36" inches |
| Minimum Stile Required | 3 انچه |
| د محصول ابعاد | 41.5 x 2.5 x 6 انچه |
| د توکي وزن | ۲.۴۵ پونډه |
| تصدیقونه | ANSI A156.3 Grade 1, UL Listed SA32524 |
| کارول | Indoor, Commercial/Industrial |
5. ترتیب او نصب کول
The TACO ED-501-AL exit device is designed for easy installation with minimum working parts. Ensure your door meets the compatibility requirements listed in the specifications section before proceeding.
شکل 5.1: مخکی view of the TACO ED-501-AL exit device.
5.1. د نصب کولو دمخه چکونه
- Confirm door thickness is between 1-3/4" and 2 inches.
- Verify door width is between 26" and 36" inches.
- Ensure a minimum stile width of 3 inches is available on the door.
- Gather necessary tools: drill, measuring tape, screwdriver, pencil.
5.2. د نصبولو پړاوونه
- دروازه چمتو کړئ: Mark the desired height for the exit device on the door. The device should be installed at a height that allows for comfortable operation.
- Mount the Device Body: Position the main body of the exit device on the door. Use the provided sex bolts and mounting screws to secure it firmly. The interlocking top latch and Pullman bottom latch are designed for faster installation.
- د سټرایک پلیټ نصب کړئ: Align the strike plate with the latch mechanism on the door frame. Mark and drill pilot holes, then secure the strike plate using the appropriate screws. Use the included strike filler if necessary for proper alignment.
- Install Lock Front Filler (if applicable): If your installation requires it, install the lock front filler according to the specific door configuration.
- د ازموینې عملیات: Once installed, test the device by pushing the bar to ensure smooth and complete retraction of the latch bolt. Ensure the door opens freely.
شکل ۳: زاویه لرونکی view of the TACO ED-501-AL exit device, showing its low-profile ډیزاین
6. عملیاتي لارښوونې
The TACO ED-501-AL Rim Surface Exit Device is designed for intuitive and reliable operation.
6.1. Exiting a Secured Area
To exit a secured area, simply apply pressure to the push bar of the exit device. The latch bolt will retract, allowing the door to open. Release the push bar, and the latch bolt will automatically extend, securing the door once closed.
6.2. Entry (External Access)
This device is primarily for exit-only applications. For external entry, an appropriate external trim (e.g., lever or knob with key cylinder) must be installed in conjunction with the exit device. Refer to the external trim's installation manual for specific instructions.
7. ساتنه
Regular maintenance ensures the longevity and proper functioning of your TACO ED-501-AL exit device.
- پاکول: Clean the device periodically with a soft, damp ټوکر. د کثافاتو پاکوونکو یا محلولونو څخه ډډه وکړئ کوم چې پای ته زیان رسولی شي.
- غوړول: Lightly lubricate moving parts (e.g., latch bolt mechanism) annually with a silicone-based lubricant. Do not over-lubricate.
- معاینه: Regularly inspect the device for any signs of wear, loose screws, or damage. Ensure the push bar operates smoothly without binding.
- سمونونه: If the device does not operate smoothly, check for proper alignment of the strike plate and latch bolt. Adjust as necessary.
8. ستونزه حل کول
د عامو ستونزو او د هغوی د حل لارو لپاره لاندې جدول ته مراجعه وکړئ:
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| Device does not latch properly. | Misaligned strike plate; Latch bolt obstructed; Worn components. | Check and adjust strike plate alignment. Clear any obstructions. Inspect for wear and replace if necessary. |
| Push bar is stiff or binds. | Lack of lubrication; Debris in mechanism; Bent push bar. | Apply lubricant to moving parts. Clean out any debris. Inspect for damage and replace if bent. |
| Door does not open when push bar is pressed. | Latch bolt not retracting fully; Door binding in frame. | Check for obstructions around the latch bolt. Ensure door hinges are functioning correctly and door is not binding. |
9. تضمین او ملاتړ
For warranty information or technical support regarding your TACO ED-501-AL Rim Surface Exit Device, please contact TACO customer service directly. Keep your purchase receipt and model number handy for faster service.
جوړونکی: ټیکو
ماډل: ED-501-AL
For further assistance, visit the manufacturer's official webسایټ ته مراجعه وکړئ یا د دوی د ملاتړ کرښې سره اړیکه ونیسئ.
