د لوټرون LECL-153PH-LA X-10 مطابقت لرونکی ډیمر سویچ کارونکي لارښود

پیژندنه

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Lutron LECL-153PH-LA X-10 Compatible Dimmer Switch. This device is designed to control incandescent, halogen, and certain fluorescent lighting loads up to 600 watts at 120 Volts, utilizing X-10 powerline communication for dimming and switching functions. Please read all instructions thoroughly before proceeding with installation or use.

د خوندیتوب مهم معلومات

• خبرداری: د اور، شاک یا مرګ څخه د مخنیوي لپاره، د سرکټ بریکر یا فیوز بکس کې بریښنا بنده کړئ او د تار لګولو دمخه ازموینه وکړئ چې بریښنا بنده ده.
• د ټولو ملي او محلي بریښنا کوډونو سره سم نصب کړئ.
• This dimmer is for use with permanently installed incandescent, halogen, or compatible fluorescent fixtures only. Do not use with low-voltage lighting with a magnetic transformer, motor-driven appliances, or non-dimmable fluorescent fixtures.
• یوازې د داخلي کارونې لپاره.
• که تاسو د دې لارښوونو د کومې برخې په اړه ډاډه نه یاست ، د بریښنایی تکنالوژی څخه مشوره وکړئ.

د بسته محتويات

• Lutron LECL-153PH-LA X-10 Compatible Dimmer Switch (Light Almond)
• Mounting Screws (typically included)
• Wire Connectors (typically included)
• د لارښود لارښود (دا سند)

انځور: مخکینۍ برخه view of the Lutron LECL-153PH-LA X-10 Compatible Dimmer Switch in Light Almond color, showing the rocker switch and slide dimmer control.

مشخصات

نصب کول (تنظیم کول)

This dimmer is an X-10 compatible device. Proper installation requires understanding of both standard electrical wiring and X-10 addressing. If you are unfamiliar with X-10 systems, please consult an X-10 expert or a qualified electrician.

اړین وسایل:

• سکرو ډرایور (فیلپس او فلیټ هیډ)
• واير سټرپرېز
• بریښنایی ټیپ
• والیtage ټیسټر

د تار لګولو لارښوونې:

1. د بریښنا بندول: Locate the circuit breaker or fuse that controls the light switch you are replacing. Turn it OFF. Verify power is off at the switch box using a voltage ټیسټر.
2. موجوده سویچ لرې کړئ: په احتیاط سره د دیوال پلیټ لرې کړئ او موجوده سویچ د دیوال بکس څخه خلاص کړئ. تارونه د زاړه سویچ څخه جلا کړئ.
3. د تارونو پیژندنه:
   • Line/Hot Wire: Carries power from the circuit breaker.
   • د بار تار: Connects to the light fixture.
   • بې طرفه تار: (If present, typically white) Not always required for dimmers, but check dimmer specifications.
   • ځمکني تار: (Bare copper or green) Connects to the metal electrical box or ground wire bundle.
   • Traveler Wires: (For 3-way installations, typically red or black) Connects between two switches controlling the same light.
4. Connect the Dimmer:
   • سره وصل کړئ ځمکنی تار from the wall box to the green or bare copper wire on the dimmer.
   • سره وصل کړئ Line/Hot wire to the designated Line terminal on the dimmer.
   • سره وصل کړئ د تار بار کول to the designated Load terminal on the dimmer.
   • For 3-way installations, connect the traveler wires to the appropriate traveler terminals on both the dimmer and the companion switch. Refer to the specific wiring diagram provided with your dimmer for 3-way configurations.
   • Ensure all wire connections are secure using wire connectors.
5. Set X-10 Address: Before mounting, set the X-10 House Code and Unit Code on the dimmer. This is typically done via small rotary switches or dip switches on the dimmer module. Refer to the specific instructions on the dimmer itself or a separate X-10 setup guide for your system.
6. ډیمر نصب کړئ: Carefully fold the wires into the wall box and secure the dimmer to the box with the provided screws.
7. وال پلیټ نصب کړئ: دیوال پلیټ سره ضمیمه کړئ.
8. د بریښنا بیرته راګرځول: په سرکټ بریکر کې بریښنا بیرته فعاله کړئ.

عملیات

The Lutron LECL-153PH-LA dimmer switch offers both manual control and X-10 powerline control.

لاسي کنټرول:

• آن/بند: Press the bottom rocker switch to turn the lights ON or OFF.
• دیمینګ: Use the vertical slide control to adjust the light level. Slide up to brighten, slide down to dim.

X-10 Control:

Once the X-10 House Code and Unit Code are set, the dimmer will respond to X-10 commands sent over the powerline from an X-10 controller (e.g., a remote, wall-mounted keypad, or computer interface). Common X-10 commands include:

• "ON": Turns the light on to the last set dim level or full brightness.
• "OFF": رڼا بندوي.
• "BRIGHT": Gradually brightens the light.
• "DIM": Gradually dims the light.

Refer to your X-10 system's documentation for specific programming and command details.

ساتنه

• پاکول: د ډیمر پاکولو لپاره، د نرم، d سره مسح کړئamp cloth. Do not use chemical cleaners or abrasive materials.
• د کارونکي د خدمت وړ برخې نشته: There are no user-serviceable parts inside the dimmer. Do not attempt to open or repair the unit.

د ستونزو حل کول

تضمین او ملاتړ

This Lutron product is covered by a warranty. For detailed warranty information, please refer to the warranty card included with your product or visit the official Lutron website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Lutron customer service directly.

لوټرون Webسایټ: www.lutron.com