NVIDIA 900-2G610-0000-000

NVIDIA Tesla P40 Passive Cooling GPU Instruction Manual

Model: 900-2G610-0000-000

1. پیژندنه

The NVIDIA Tesla P40 is a high-performance GPU accelerator designed for deep learning deployment and artificial intelligence applications. Built on the NVIDIA Pascal architecture, it provides significant computational power for accelerating demanding workloads. This manual provides essential information for the proper installation, operation, and maintenance of your Tesla P40 GPU.

NVIDIA Tesla P40 GPU, front angled view showing the passive heatsink and PCIe bracket.

شکل ۱: مخکینۍ زاویه view of the NVIDIA Tesla P40 GPU, highlighting its passive cooling design and PCIe interface.

2. کلیدي ځانګړتیاوې

  • لړۍ: Tesla P40, Model: 900-2G610-0000-000
  • د GPU جوړښت: NVIDIA پاسکال
  • واحد دقیق فعالیت: 12 TeraFLOPS
  • Integer Operations (INT8): 47 TOPS (Tera-Operations per Second)
  • د GPU حافظه: 24 GB GDDR5
  • د حافظې بانډ ویت: 346 GB/s
  • د سیسټم انٹرفیس: PCI ایکسپریس 3.0 x16
  • اعظمي ځواک: 250W
  • Enhanced Programmability: With Page Migration Engine
  • ECC Protection: هو
  • Server-Optimized: For Data Center Deployment
  • Hardware-Accelerated Video Engine: 1x Decode Engine, 2x Encode Engine

3. د تنظیم کولو لارښود

۴.۱ د نصبولو دمخه چکونه

  • د سیسټم مطابقت: Ensure your server or workstation has an available PCI Express 3.0 x16 slot.
  • د بریښنا رسول: A robust power supply unit (PSU) capable of providing sufficient power (up to 250W for the GPU) and equipped with the necessary 8-pin CPU power cable (EPS12V) is required. Standard PCIe power cables may not be compatible or sufficient.
  • یخ کول: The Tesla P40 features passive cooling and requires adequate system airflow within the server chassis to dissipate heat effectively. Ensure your server has sufficient fan configuration for proper cooling.
  • د BIOS ترتیبات: Verify that your motherboard BIOS supports and has "Above 4G decoding" enabled, typically found under boot options or PCIe settings.

3.2 فزیکي نصب کول

  1. خپل سیسټم بند کړئ او د بریښنا ټول کیبلونه جلا کړئ.
  2. Open your computer case and locate an available PCI Express 3.0 x16 slot.
  3. Carefully insert the NVIDIA Tesla P40 into the PCIe slot, ensuring it is fully seated. Secure the card with the retaining clip or screw.
  4. Connect the 8-pin CPU power cable (EPS12V) from your power supply to the power connector on the Tesla P40. Ensure a secure connection.
NVIDIA Tesla P40 GPU, top view showing the power connector and NVIDIA branding.

شکل 2: پورته view of the NVIDIA Tesla P40, illustrating the location of the 8-pin power connector.

3.3 د ډرایور نصب کول

  1. After physical installation, close your computer case and reconnect power.
  2. خپل سیسټم بوټ کړئ.
  3. Download the appropriate NVIDIA drivers for the Tesla P40 from the official NVIDIA website. It is crucial to select drivers compatible with the Pascal architecture. For optimal compatibility, consider using NVIDIA driver version 580 or earlier, as newer versions (e.g., 590 and later) may have dropped support for Pascal devices.
  4. د ډرایورونو د نصبولو لپاره په سکرین کې لارښوونې تعقیب کړئ. ممکن د سیسټم ریبوټ ته اړتیا وي.
  5. For Linux systems, if you encounter issues after enabling >4G decoding, you may need to boot into a rescue disk, mount your main OS, chroot into it, and run `mkinitcpio -P` or similar commands to regenerate your kernel image and grub configuration.

4. عملیاتي لارښوونې

۶.۲ د سافټویر چاپیریال تنظیم کول

  • CUDA Toolkit: Install the NVIDIA CUDA Toolkit, which provides the development environment for GPU-accelerated applications. Ensure the CUDA version is compatible with your installed NVIDIA drivers.
  • Deep Learning Frameworks: Configure your preferred deep learning frameworks (e.g., TensorFlow, PyTorch) to utilize the NVIDIA Tesla P40. Refer to the documentation of your chosen framework for specific setup instructions.

4.2 Monitoring and Performance

  • Use NVIDIA's `nvidia-smi` utility (available after driver installation) to monitor GPU utilization, memory usage, temperature, and power consumption.
  • Ensure GPU temperatures remain within safe operating limits, typically below 90°C under load. Due to passive cooling, maintaining adequate system airflow is critical for thermal management.

5. ساتنه

  • د دوړو لرې کول: Periodically inspect your server chassis and the GPU for dust accumulation. Dust can impede airflow and reduce cooling efficiency. Use compressed air to gently clean the heatsink fins and surrounding areas.
  • د چاپیریال کنټرول: Operate the system in a clean, temperature-controlled environment to prevent overheating and prolong component lifespan.
  • د موټر چلوونکي تازه معلومات: While keeping drivers updated is generally recommended, exercise caution with Tesla P40. Refer to NVIDIA's official support channels for recommended driver versions to avoid compatibility issues with older Pascal architecture.

6. ستونزه حل کول

  • System Not Recognizing GPU:
    • Verify the GPU is fully seated in the PCIe slot.
    • Ensure the 8-pin CPU power cable is securely connected.
    • Check BIOS settings for "Above 4G decoding" and ensure it is enabled.
    • Reinstall or update NVIDIA drivers.
  • د ډیر تودوخې مسلې:
    • Confirm adequate airflow within the server chassis. Ensure all system fans are functioning correctly and are configured to provide sufficient cooling for passive components.
    • Clean any dust accumulation from the GPU heatsink and server vents.
    • د امکان په صورت کې د چاپیریال تودوخې کم کړئ.
  • د بریښنا کیبل مسلې: Some users have reported issues with included power cables. Ensure you are using a high-quality 8-pin EPS12V CPU power cable that can safely deliver the required wattage. If issues persist, consider replacing the cable with a verified compatible one.
  • د فعالیت تخریب:
    • Check GPU utilization and temperature using `nvidia-smi`. Thermal throttling can reduce performance.
    • Ensure your software environment (CUDA, deep learning frameworks) is correctly configured and optimized for the Tesla P40.

If troubleshooting steps do not resolve the issue, please contact NVIDIA support for further assistance.

7. مشخصات

Close-up of the NVIDIA Tesla P40 label showing model number 900-2G610-0000-000 and other regulatory information.

Figure 3: Product label displaying the model number and other identification details.

فیچرتفصیل
د ماډل شمیره900-2G610-0000-000
د GPU جوړښتNVIDIA پاسکال
د ګرافیک کاپروسیسرNVIDIA Tesla P40
د واحد دقیق فعالیت12 TeraFLOPS
Integer Operations (INT8)47 TOPS (Tera-Operations per Second)
د GPU حافظه24 GB GDDR5
د حافظې بانډ ویت346 GB/s
د سیسټم انٹرفیسPCI ایکسپریس 3.0 x16
د اعظمي بریښنا مصرف250W
ECC Protectionهو
Hardware-Accelerated Video Engine1x Decode Engine, 2x Encode Engine
د کڅوړې ابعاد17.05 x 8.66 x 3.19 انچه
د توکي وزن۲.۴۵ پونډه
نیټه لومړی شتون لريد ۲۰۲۴ کال د جولای ۹ مه

8. تضمین او ملاتړ

For information regarding product warranty, technical support, and service, please refer to the official NVIDIA website or contact your point of purchase. NVIDIA provides comprehensive resources and support for its products.

اړوند اسناد - 900-2G610-0000-000

مخکېview د NVIDIA AI انټرپرائز کارونکي لارښود: نصب، ترتیب، او مدیریت
د NVIDIA AI انټرپرائز لپاره جامع کارونکي لارښود، چې د مختلفو هایپروایزرز او عملیاتي سیسټمونو کې د NVIDIA vGPU، AI چوکاټونو، او سافټویر اجزاو نصبولو، ترتیب کولو او مدیریت توضیحات ورکوي.
مخکېview NVIDIA TensorRT Support Matrix v4.0.1 - Platform and Layer Compatibility
Comprehensive support matrix for NVIDIA TensorRT version 4.0.1, detailing compatibility across platforms (Linux, Android, QNX) and software versions (CUDA, cuDNN), along with a detailed breakdown of supported features for each TensorRT layer.
مخکېview NVIDIA Jetson Xavier NX Series Product Marking Specification
This document specifies the product markings for the NVIDIA Jetson Xavier NX series modules, including details on part numbers, serial numbers, barcodes, and country of origin.
مخکېview د WSL کارونکي لارښود کې CUDA - NVIDIA
د GPU-ګړندي کمپیوټري، مصنوعي ذهانت، او ماشین زده کړې پراختیا لپاره د لینکس لپاره د وینډوز فرعي سیسټم (WSL) سره د CUDA تنظیم او کارولو لپاره د NVIDIA جامع لارښود.
مخکېview د NVIDIA ډیټا سینټر GPU مدیر کارونکي لارښود
دا د کارونکي لارښود د NVIDIA د ډیټا سینټر GPU مدیر (DCGM) په اړه جامع معلومات چمتو کوي، یوه وسیله چې د کلستر او ډیټا سینټر چاپیریالونو کې د NVIDIA Tesla GPUs اداره، څارنه او مدیریت ساده کولو لپاره ډیزاین شوې ده. دا نصب، ترتیب، او ځانګړتیاوې پوښي.views، د څارنې وسیلو لکه پرومیټیوس او ګرافانا سره یوځای کول، او د تشخیص وړتیاوې.
مخکېview د NVIDIA AI انټرپرائز کارونکي لارښود: د GPU مجازی کول، ځای پرځای کول، او مدیریت
د NVIDIA AI انټرپرایز لپاره جامع کارونکي لارښود، چې په مجازی GPU چاپیریالونو کې د AI او ډیټا تحلیلي کاري بارونو نصب، ترتیب، او مدیریت توضیح کوي. vGPU، Kubernetes، VMware vSphere، او Red Hat KVM پوښي.