پیژندنه
This manual provides essential information for the installation, operation, and maintenance of your MAC Auto Parts 6-Piece OE Replacement Brake Service Kit. This kit is designed to replace the front and rear brake disc rotors and ceramic brake pads on compatible vehicles, ensuring optimal braking performance and safety. Please read this manual thoroughly before proceeding with installation or maintenance.
محصول پای ته ورسیدview او اجزا
The MAC Auto Parts 6-Piece OE Replacement Brake Service Kit includes all necessary components for a complete front and rear brake service. The kit is comprised of high-quality brake disc rotors and ceramic brake pads, engineered for durability and performance.
Figure 1: Complete 6-Piece Brake Service Kit including front and rear rotors and ceramic pads.
د کټ مینځپانګه:
- 2x Front Brake Disc Rotors: Part# R1184 1407-479087 BR901184 121.51052
- 1x Front Brake Disc Pads Ceramic: Part# SCD1432 (4 Pads = 1 Set)
- 2x Rear Brake Disc Rotors: Part# 10-31553 REF# BR900894 121.51039
- 1x Rear Brake Disc Pads Ceramic: Part# SCD1284 (4 Pads = 1 Set)
د وسایطو مطابقت
This brake service kit is compatible with the following vehicle makes and models:
- 2013-2016 Hyundai Santa Fe: ټول ماډلونه
- 2014-2016 Kia Sorento: ټول ماډلونه
Important: Always confirm vehicle compatibility before installation to ensure proper fitment and safe operation.
تنظیم او نصب کول
Installation of brake components requires specialized tools and knowledge. It is highly recommended that installation be performed by a qualified automotive technician. Improper installation can lead to brake system failure, resulting in serious injury or death.
د خوندیتوب احتیاطونه:
- تل مناسب شخصي محافظتي تجهیزات (PPE) واغوندئ، په شمول د خوندیتوب عینکې او دستکشې.
- د کار پیل کولو دمخه ډاډ ترلاسه کړئ چې موټر په خوندي ډول د جیک سټینډونو په سطحه په سطحه ملاتړ شوی.
- Disconnect the vehicle's battery before working on any electrical components.
- Do not work under a vehicle supported only by a jack.
- Refer to your vehicle's specific service manual for detailed brake system removal and installation procedures.
د نصبولو عمومي مرحلې (د ځانګړتیاو لپاره د موټر لارښود سره مشوره وکړئ):
- Safely lift and support the vehicle. Remove the wheels.
- Remove the brake caliper and support it without straining the brake hose.
- Remove the old brake pads and brake disc rotor.
- Clean the hub surface thoroughly to ensure proper seating of the new rotor.
- Install the new MAC Auto Parts brake disc rotor.
- Install the new MAC Auto Parts ceramic brake pads into the caliper bracket.
- Reinstall the brake caliper and secure all fasteners to the manufacturer's torque specifications.
- Repeat for all wheels.
- Bleed the brake system if brake lines were opened or if air is suspected in the system.
- Pump the brake pedal several times to seat the pads against the rotors before driving.
- Perform a test drive in a safe area at low speed to confirm proper brake function.
عملیاتي نظرونه
After installation, it is crucial to properly "bed-in" the new brake pads and rotors. This process helps to transfer a thin, even layer of pad material onto the rotor surface, which is essential for optimal braking performance and longevity, and to prevent noise and vibration.
Brake Bed-In Procedure:
- یو خوندي، خلاص سیمه ومومئ چې لږ تر لږه ترافیک ولري.
- شاوخوا ۳۵ میل فی ساعت (۵۶ کیلومتره/ساعت) ته سرعت ورکړئ او د بریک کولو منځنۍ فشار ورکړئ ترڅو سرعت یې شاوخوا ۵ میل فی ساعت (۸ کیلومتره/ساعت) ته ورو کړئ. په بشپړ ډول مه ودریږئ.
- Repeat this process 5-6 times, allowing a few minutes between each cycle for the brakes to cool slightly.
- After the initial cycles, accelerate to approximately 50 mph (80 km/h) and apply firm braking pressure (but not hard enough to activate ABS) to slow down to about 5 mph (8 km/h).
- Repeat this firmer braking process 2-3 times, again allowing for cooling between cycles.
- Avoid heavy braking or prolonged stops immediately after the bed-in procedure. Allow the brakes to cool completely before normal driving.
During the bed-in process, you may notice some smoke or a burning smell; this is normal. After bed-in, the brakes should provide consistent and quiet performance.
ساتنه
Regular inspection and maintenance of your brake system are vital for safety and performance. Follow your vehicle manufacturer's recommended maintenance schedule.
د ساتنې سپارښتنې:
- منظم معاینه: Inspect brake pads, rotors, calipers, and brake lines at least once a year or every 12,000 miles (20,000 km), or as recommended by your vehicle manufacturer.
- د پښو اغوستل: Replace brake pads when they reach their minimum thickness specification (typically 2-3mm).
- د روټر حالت: Check rotors for excessive wear, scoring, cracks, or warping. Rotors should be replaced if they fall below minimum thickness or show significant damage.
- د بریک مایع: Check brake fluid level and condition regularly. Replace brake fluid according to your vehicle manufacturer's recommendations.
- پاکوالی: Keep brake components free from dirt, debris, and corrosion.
د ستونزو حل کول
If you experience any issues with your brake system after installing this kit, consult the following common troubleshooting tips. For complex issues, always seek assistance from a qualified technician.
Common Brake Issues:
- د بریک شور (چیغې وهل/پیسول):
- چیغې وهل: Often caused by new pads not being properly bedded-in, or lack of anti-squeal shims/lube. Ensure proper bed-in and correct installation of all components.
- پیسول: Typically indicates severe pad wear, where the metal backing plate is contacting the rotor. Inspect pads immediately and replace if worn.
- Vibration/Pulsation during Braking:
- Often caused by warped rotors or uneven pad material transfer. Ensure proper bed-in procedure was followed. Inspect rotors for runout.
- د بریک کولو فعالیت کم شوی:
- Could be due to air in the brake lines (if lines were opened), contaminated pads, or improper bed-in. Check for leaks, re-bleed brakes, or re-perform bed-in.
- Pulling to One Side during Braking:
- May indicate a seized caliper, uneven pad wear, or a brake hose issue on one side. Inspect calipers and hoses.
Warning: Any significant brake system issue should be addressed immediately by a professional to ensure vehicle safety.
مشخصات
| صفت | ارزښت |
|---|---|
| برانډ | MAC |
| جوړونکی | د مک آټو پرزې |
| د ماډل شمیره | 153551 |
| مواد | Ceramic (Pads) |
| د موټرو خدمت ډول | موټر |
| د کټ منځپانګې | 2 Front Rotors, 1 Set Front Ceramic Pads, 2 Rear Rotors, 1 Set Rear Ceramic Pads |
د تضمین معلومات
The warranty for your MAC Auto Parts brake service kit is stated on the product listing at the time of purchase. For specific details regarding warranty coverage, duration, and terms, please refer to the original product listing or contact the seller directly.
Figure 2: Warranty statement from the product listing.
If you have any questions regarding the warranty or require assistance, please contact the seller or manufacturer through the contact information provided on your purchase receipt or the product's sales platform.
ملاتړ
For technical assistance, installation guidance, or any other product-related inquiries, it is recommended to consult a certified automotive professional. You may also reach out to the seller or manufacturer for support, referencing your purchase details and the product model number.
جوړونکی: د مک آټو پرزې
For further assistance, please refer to the contact information provided with your purchase or on the official MAC Auto Parts webسایټ (که شتون ولري).
