1. محصول ختم شوview
The Bside CCT01 Digital Coating Thickness Gauge is designed for non-destructive, fast, and precise measurement of coating thickness. It operates based on either the magnetic induction principle (F probe) or the eddy current principle (N probe), depending on the substrate material. This device is equipped with both internal F and N probes.
The F probe is suitable for measuring non-magnetic coatings such as aluminum, chrome, copper, zinc, paint, varnish, enamel, and rubber on iron or steel substrates. It is also applicable to alloyed and hardened magnetic steel, but not austenitic steel.
The N probe is used for insulating coatings like paint, anodizing, and ceramics on all non-ferrous metals (e.g., aluminum, copper, zinc die casting, brass) and on austenitic stainless steels.
شکل 1: مخکی view of the Bside CCT01 Digital Coating Thickness Gauge, showing the LCD display, control buttons, and the Bside CCT01 branding.
2. کلیدي ځانګړتیاوې
- ښکاره کول: 128x128 dot matrix LCD with standard menu operations.
- د اندازه کولو طریقې: Supports both single and continuous measurement.
- Group Modes: Two group modes: Direct (DIR) and General (GEN). Readings in Direct mode are lost upon power off, while General mode stores up to 80 readings per group.
- اندازه کول: Zero-point calibration and multi-point calibration (up to 4 points) for each group.
- د معلوماتو مدیریت: Ability to recall, delete specified readings, or delete entire group readings.
- احصایې: Displays mean, minimum, maximum, and standard deviation of readings.
- Probe Modes: Auto, Magnetic (F), and Eddy Current (N) probe selection.
- د الارم فعالیت: User-definable high or low limit alarms for each group.
- د بریښنا مدیریت: د اتوماتیک بریښنا بندولو ځانګړتیا.
- ارتباط: USB interface for data transmission to a computer.
- شاخصونه: Low battery and error indications.
3. ترتیب کول
3.1 د بیټرۍ نصب کول
- د آلې په شا کې د بیټرۍ کڅوړه ومومئ.
- Using a small screwdriver, remove the screws securing the battery compartment cover.
- Insert two 1.5V AAA batteries, ensuring correct polarity as indicated inside the compartment.
- Replace the battery compartment cover and secure it with the screws.
شکل 2: View of the battery compartment, showing the placement for two 1.5V AAA batteries.
شکل 3: شاته view of the device, displaying the battery compartment cover and a warning regarding battery disposal and recycling.
3.2 بریښنا کول / بندول
- د بریښنا لپاره ، فشار ورکړئ او ونیسئ ځواک تڼۍ
- وسیله به د بیټرۍ د ژوند د ساتلو لپاره د غیر فعالیت مودې وروسته په اتوماتيک ډول بند شي.
4. عملیاتي لارښوونې
4.1 د اندازه کولو طریقې
- واحد حالت: For individual measurements. Press the probe onto the surface, read the value, then lift.
- دوامداره حالت: For scanning a surface. Keep the probe on the surface and slide it to take multiple readings.
4.2 Group Modes
- Direct (DIR) Group: Readings are displayed but not stored in memory. Data is lost when the device powers off.
- General (GEN) Group: Readings are automatically stored. Up to 80 readings can be stored for each of the four general groups. Each group maintains individual statistics, alarm limits, and calibration settings.
4.3 اندازه کول
Accurate measurements require proper calibration. The device supports zero-point and multi-point calibration.
- Zero-Point Calibration: Used to set the zero reference on an uncoated substrate.
- Multi-Point Calibration (up to 4 points): For enhanced accuracy across the measurement range, using calibration foils of known thickness.
Refer to the on-screen menu for detailed calibration steps.
4.4 Probe Modes
The device can automatically detect the substrate type or be manually set.
- د موټرو حالت: The gauge automatically selects between F (magnetic induction) and N (eddy current) probe principles.
- Magnetic Mode (F Probe): For non-magnetic coatings on ferrous substrates.
- Eddy Current Mode (N Probe): For insulating coatings on non-ferrous substrates.
4 شکل: تړل view of the professional test probe at the bottom of the device, designed for accurate contact with the measurement surface.
۵.۲ د الارمونو تنظیم کول
Users can set high and low alarm limits for each group. An alarm icon will be displayed on the LCD when a reading exceeds these limits.
4.6 Data Management and Statistics
Navigate through the menu to:
- یادونه: View ذخیره شوي لوستل.
- ړنګول: Remove specific readings or clear an entire group.
- Browse Statistics: View calculated statistics including the number of readings, mean, minimum, maximum, and standard deviation for the current group.
5. د معلوماتو لیږد
The Bside CCT01 features a USB interface for transferring measurement data to a computer. This allows for further analysis and record-keeping.
5 شکل: تړل view of the USB interface located on the side of the device, used for data transmission.
6. ساتنه
6.1 د بیټرۍ بدلول
When the low battery indicator appears, replace the AAA batteries as described in Section 3.1. Always use fresh batteries for optimal performance.
6.2 پاکول
Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Keep the probe tip clean and free of debris for accurate readings.
6.3 ذخیره کول
Store the device in its original packaging or a protective case when not in use. Avoid extreme temperatures and high humidity. If storing for extended periods, remove the batteries to prevent leakage.
7. ستونزه حل کول
- د ټیټ بیټرۍ نښې: If the low battery icon appears, replace the batteries immediately.
- د تېروتنې اشاره: If an error message is displayed, refer to the device's on-screen help or power cycle the device. If the issue persists, contact customer support.
- ناسم لوستل: Ensure the probe tip is clean, the device is properly calibrated, and the correct probe mode (F/N/Auto) is selected for the substrate.
8. مشخصات
| پیرامیټر | F Probe (Magnetic Induction) | N Probe (Eddy Currents) |
|---|---|---|
| د اندازه کولو رینج | 0 to 1300um (0 to 51.2mils) | 0 to 1300um (0 to 51.2mils) |
| دقت | (3% + 2um) / (3% + 0.078mils) | (3% + 2um) / (3% + 0.078mils) |
| قرارداد | 0-999um (1um), 1000-1300um (0.01mm) 0-39.39mils (0.01mils), 39.4-51.2mils (0.1mils) | 0-999um (1um), 1000-1300um (0.01mm) 0-39.39mils (0.01mils), 39.4-51.2mils (0.1mils) |
| کیلیبریشن | One-point to four-point calibration, zero-point calibration | |
| Data Groups | One direct group (readings not stored), Four general groups (readings stored automatically) | |
| احصایې | Number of readings, mean, minimum, maximum, standard deviation | |
| واحدونه | um, mm, mils | |
| الارم | User-settable high/low alarm limits | |
| Minimum Curvature Radius (Convex) | 1.5mm | |
| Minimum Curvature Radius (Concave) | 25mm | |
| Minimum Measuring Area Diameter | 6mm | |
| د سبسټریټ لږترلږه ضخامت | ۱۶.۵ ملي متره (۰.۶۴ انچه) | ۱۶.۵ ملي متره (۰.۶۴ انچه) |
| Maximum Measuring Rate | په هره ثانیه کې دوه لوستل | |
| د کمپیوټر انٹرفیس | USB | |
| د بریښنا رسول | Two 1.5V AAA batteries (not included) | |
| د عملیاتو چاپیریال | Temperature: 0 to 40°C (32 to 104°F); Humidity: 20% to 90% RH | |
| د ذخیره کولو چاپیریال | د تودوخې درجه: -20 څخه تر 70 ° C (-4 څخه تر 158 ° F) | |
| معیاري موافقت | ROHS, WEEE | |
| ابعاد | 110mm x 53mm x 24mm (4.33" x 2.09" x 0.94") | |
| د قضیې مواد | ABS | |
| وزن | 92 ګرامه (3.24 اوز) | |
9. د بسته محتويات
په معیاري بسته کې شامل دي:
- Bside CCT01 Digital Coating Thickness Gauge
- USB کیبل
- کیلیبریشن ورق
- Substrate Plates (Ferrous and Non-Ferrous)
- د کارن لارښود
Figure 6: The Bside CCT01 gauge shown with its included accessories, including calibration foils and a USB cable, on a car panel.
10. تضمین او ملاتړ
Information regarding product warranty and customer support is typically provided with the purchase documentation or available on the manufacturer's official website. Please refer to those resources for details on warranty coverage, technical assistance, and service options.
