1. پیژندنه
د پیرودلو لپاره مننهasing the Project Source 2-Pack 13-inch Bronze Flush Mount Light fixtures. These fixtures are designed to provide ambient lighting with a traditional aesthetic, featuring a durable bronze finish and an elegant alabaster glass shade. They are suitable for various indoor spaces, including bathrooms, bedrooms, kitchens, dining rooms, and living rooms, enhancing the decor while providing reliable illumination.
شکل 1: Two Project Source 13-inch Bronze Flush Mount Light fixtures. Each fixture features a round bronze base and a dome-shaped alabaster glass shade, secured by a small finial at the bottom center of the shade.
۱.۱. د خوندیتوب مهم معلومات
خبرداری: د بریښنا شاک خطر. د نصب یا خدمت کولو دمخه د فیوز بکس یا سرکټ بریکر کې بریښنا قطع کړئ.
- د نصب کولو پیل کولو دمخه ټولې لارښوونې په دقت سره ولولئ.
- ټول بریښنایی اړیکې باید د ځایی کوډونو، مقرراتو، یا د ملي بریښنا کوډ (NEC) سره سم وي. که تاسو د بریښنایی تارونو د مناسبو اړیکو سره نا اشنا یاست نو د وړ بریښنایی متخصص سره مشوره وکړئ.
- Use only UL-listed wire connectors for the electrical connections.
- د اعظمي واټ څخه ډیر مه کوئtage specified for this fixture (14 Watts per bulb).
- د نصبولو پرمهال د خوندیتوب عینکې او مناسب محافظتي وسایل واغوندئ.
- ډاډ ترلاسه کړئ چې فکسچر په سمه توګه مینځل شوی.
3. د بسته محتويات
د نصبولو پیل کولو دمخه ډاډ ترلاسه کړئ چې ټولې برخې شتون لري:
- 2 x 13-inch Bronze Flush Mount Light Fixtures (with alabaster glass shades)
- د نصبولو هارډویر (پیچونه، د تار مغز، د نصبولو بریکٹ)
- Note: Light bulbs are NOT included.
4. مشخصات
| فیچر | تفصیل |
|---|---|
| برانډ | د پروژې سرچینه |
| د ماډل شمیره | 40804 |
| ابعاد (پلورل x لوړوالی) | 13 انچه x 5.36 انچه |
| ختم | د برونزو |
| سیوري مواد | د الابستر شیشه |
| د څراغونو شمیر | 2 per fixture |
| د بلب اساس ډول | Medium base (E-26) |
| وړاندیز شوی بلب شکل | A15 |
| اعظمي بلب واټtage | 14 Watts (per bulb) |
| خوندیتوب لیست | UL لیست شوی |
| د خونې مطابقت | Bathroom, Bedroom, Kitchen, Dining Room, Living Room |
| د لګولو ډول | د غرونو غر |
| د توکو وزن (پیکج) | ۲.۴۵ پونډه |
5. ترتیب او نصب کول
اړین وسایل: Phillips head screwdriver, flathead screwdriver, wire strippers, electrical tape, safety glasses.
د نصب کولو دمخه مرحلې:
- بریښنا بند کړئ: Locate the circuit breaker or fuse box that supplies power to the light fixture location. Turn off the power completely before proceeding.
- ساحه چمتو کړئ: Clear the work area and ensure you have stable footing if using a ladder.
- خلاص کړئ: Carefully remove the fixture and all components from the packaging.
د نصبولو مرحلې:
- د نصب کولو بریکٹ ضمیمه کړئ: د چمتو شوي پیچونو په کارولو سره د چت په بریښنایی جنکشن بکس کې د نصب کولو بریکٹ (شامل دی) خوندي کړئ. ډاډ ترلاسه کړئ چې دا په کلکه سره وصل دی.
- د بریښنا تارونه وصل کړئ:
- سره وصل کړئ تور (hot) wire from the ceiling to the تور wire of the fixture using a wire nut.
- سره وصل کړئ سپین (neutral) wire from the ceiling to the سپین wire of the fixture using a wire nut.
- سره وصل کړئ ځمکه wire (bare copper or green) from the ceiling to the ځمکه wire of the fixture (or the ground screw on the mounting bracket) using a wire nut or by wrapping it securely around the screw.
- Secure Fixture to Mounting Bracket: Carefully push the wired fixture up towards the ceiling, aligning the holes in the fixture base with the screws on the mounting bracket. Secure the fixture in place with the decorative nuts or screws provided.
- د رڼا بلبونه نصب کړئ: Insert the recommended A15 shape, E-26 medium base light bulbs (not included) into the sockets. Do not exceed 14 Watts per bulb.
- د شیشې سیوري ضمیمه کړئ: Carefully place the alabaster glass shade onto the fixture. Secure it in place using the finial or retaining ring provided, tightening it gently until snug. Do not overtighten.
- د بریښنا بیرته راګرځول: کله چې نصب بشپړ شي او ټولې اړیکې خوندي شي، په سرکټ بریکر کې بریښنا بیرته راوباسئ.
6. عملیاتي لارښوونې
Once the Project Source Flush Mount Light fixtures are correctly installed and power is restored, they can be operated using the standard wall switch connected to the circuit. Simply toggle the wall switch to turn the lights on or off.
7. پاملرنه او ساتنه
Regular cleaning will help maintain the appearance and performance of your light fixtures.
- د فکسچر پاکول: Dust the bronze finish regularly with a soft, dry cloth. For more thorough cleaning, wipe the bronze finish with a damp cloth and a mild, non-abrasive soap solution, then dry immediately with a clean, soft cloth to prevent water spots.
- Cleaning the Glass Shade: The alabaster glass shade can be removed for cleaning. Wash it with mild soap and water, then rinse thoroughly and dry completely before reattaching to the fixture.
- د بلب بدلول: Always ensure the power is turned off at the circuit breaker and the bulbs have cooled down before attempting to replace them. Use only bulbs that meet the specified wattage او اساس ډول.
- Do not use abrasive cleaners, solvents, or polishes on any part of the fixture, as they may damage the finish or glass.
8. ستونزه حل کول
که تاسو د خپل رڼا فکسچر سره ستونزې سره مخ شئ، لاندې عامې ستونزې او حل لارې وګورئ:
- څراغ نه لګیږي:
- Check that the power supply is on at the circuit breaker.
- Ensure the light bulbs are correctly installed and are not burnt out. Try replacing with a known working bulb.
- Verify that all wire connections (black to black, white to white, ground) are secure and properly connected.
- Light flickers:
- Ensure the light bulbs are fully tightened in their sockets.
- Check for any loose wire connections within the fixture or junction box.
- Confirm that the bulbs used are compatible with the fixture and are not exceeding the maximum wattage.
- Glass shade is loose or wobbles:
- Gently tighten the finial or retaining ring that secures the glass shade. Do not overtighten.
If the problem persists after attempting these solutions, please consult a qualified electrician or contact customer support.
۷. تضمین او د پیرودونکو ملاتړ
For detailed warranty information regarding your Project Source 2-Pack 13-in W Bronze Flush Mount Light, please refer to the documentation included with your original purchase. Warranty terms typically cover defects in materials and workmanship for a specified period.
If you require technical assistance, have questions about installation, or need to report a defect, please contact Project Source customer service directly through their official webسایټ یا ستاسو د محصول په بسته بندۍ کې چمتو شوي د اړیکو معلومات. مهرباني وکړئ د ملاتړ سره اړیکه نیولو پر مهال خپل ماډل شمیره (40804) او د پیرود توضیحات چمتو ولرئ.
