د RGBZONE WS2812B RF LED کنټرولر کارونکي لارښود

1. پیژندنه

This manual provides detailed instructions for the RGBZONE WS2812B RF LED Controller. This controller is designed for use with WS2811 and WS2812B dream color LED strip lights, offering a wide range of dynamic lighting effects and easy wireless control.

2. د بسته محتويات

• 1 x RF LED Controller
• 1 x RF ریموټ کنټرول
• 1 x د کارونکي لارښود

3. محصول ختم شوview

The RGBZONE RF LED Controller system consists of a compact receiver unit and a 14-key RF wireless remote control. The receiver connects directly to your compatible LED strip lights and power supply, while the remote allows for convenient control of lighting modes, speed, and brightness from a distance.

Figure 3.1: RGBZONE RF LED Controller and Remote Control.

This image displays the compact RF LED controller unit alongside its 14-key wireless remote control, which is used to manage the LED strip light functions.

Figure 3.2: Dimensions of Controller and Remote.

This image illustrates the physical dimensions of both the RF LED controller and its remote, showing measurements in millimeters and inches for reference.

3.1. نښلونکي

The controller features a 3-PIN JST connector for connecting to the LED strip and a DC female connector for power input.

Figure 3.3: Controller Connectors.

یو تړلی view of the controller's 3-PIN JST connector for LED strips and the DC female connector for power input.

3.2. د ریموټ کنټرول بیټرۍ نصب کول

The remote control uses a CR2025 coin cell battery. Ensure to remove the protective film from the battery before first use.

شکل ۲.۲.۶: د بیټرۍ کڅوړه.

This image shows the battery compartment of the remote control, indicating the CR2025 battery type and the need to remove the protective film before use.

4. مشخصات

Note: The controller's output voltage د ننوتلو والیوم سره سمون خوريtage. Ensure your power supply voltage matches your LED strip's voltage (e.g., 5V LED strip requires a 5V power supply).

5. ترتیب او نصب کول

Follow these steps to properly connect your RGBZONE RF LED Controller:

1. اجزا چمتو کړئ: Ensure you have the RF LED controller, RF remote control, compatible WS2811/WS2812B LED strip lights, and a suitable DC power adapter (not included).
2. د LED پټه وصل کړئ: Connect the 3-PIN JST connector from the LED strip to the corresponding 3-PIN JST connector on the RF LED controller. Ensure the pins are aligned correctly (VCC, DATA, GND).
3. د بریښنا رسولو سره نښلول: Connect the DC female connector of the RF LED controller to your DC power adapter. مهم: د ننوتلو حجمtage of the power supply must match the operating voltage of your LED strip (e.g., for a 5V LED strip, use a 5V power supply). The controller does not regulate voltage.
4. پاور آن: Plug in the power adapter to an electrical outlet. The LED strip should light up according to the controller's default settings.

Figure 5.1: Connection Diagram.

This diagram illustrates the correct connection sequence: Power Adapter to RF Receiver (Controller), and RF Receiver to LED Strip Lights. The remote controller is shown separately, indicating its wireless function.

Figure 5.2: Detailed Connection with Voltage Note.

A more detailed connection diagram emphasizing the importance of matching the power supply voltage (DC5-24V POWER) to the LED strip's voltage (DC5-24V LED Strip).

6. عملیات

The 14-key RF remote control allows for comprehensive management of your LED strip lights. The RF signal provides a working distance of 10-30 meters, even through walls and obstacles.

6.1. د ریموټ کنټرول افعالونه

شکل ۱۱: د ریموټ کنټرول ترتیب او دندې.

This image labels the functions of each button on the 14-key RF remote control, including Mode, Speed, DIY, and RGB color buttons.

Figure 6.2: Advanced Remote Functions.

A detailed diagram of the remote control, explaining functions like Mode+ (358 modes), Speed/Brightness adjustment, Custom Mode, and the process for adjusting LED pixel points and RGB order.

• پاور آن/بند: فشار ورکړئ ځواک button to turn the lights on or off.
• Mode + / -: Cycle through 300+ (up to 358) dynamic color modes.
• سرعت + / -: Adjust the speed of the current dynamic mode.
• MENU AUTO: Activates auto-play mode, cycling through 358 modes.
• DIY + / -: Navigate through custom play lists or effect programs.
• ADD DIY: Adds the current effect to the custom mode list.
• DEL DIY: Removes the current effect from the custom mode list.
• W (سپین): Activates static white color.
• R (Red), G (Green), B (Blue): Activates static Red, Green, or Blue colors respectively.

6.2. Adjusting Pixel Count and RGB Order

The controller supports up to 2048 pixels, with a factory default of 300 pixels. To adjust the number of LED pixel points or the RGB order:

1. Ensure the LED strip is powered off.
2. فشار ورکړئ او ونیسئ مینو آټو button for 5 seconds to enter the setup menu.
3. کارول موډ + او MODE - to adjust the number of LED pixel points.
4. فشار ورکړئ R, G، یا B keys to adjust the RGB order. For example ، فشار ورکړئ R until the LED strip shows red, G until it shows green, and B until it shows blue.
5. فشار ورکړئ ځواک د وتلو او تنظیماتو خوندي کولو لپاره ت buttonۍ.

Figure 6.3: Pixel Adjustment Guidance.

This image visually prompts the user on how to adjust the controller to manage up to 2048 pixels, referencing the remote control for the necessary button presses.

6.3. Remote Control ID Matching

• Match Remote ID: اوږد فشار ورکړئ G key for 5 seconds. The LED strip will flash green 3 times, indicating successful matching.
• Cancel Remote ID: فشار ورکړئ او ونیسئ W key for 5 seconds. The LED strip will flash white 3 times, indicating the ID has been canceled.

7. ملاتړ شوي محصولات

This controller is specifically designed for and compatible with the following LED types:

• WS2811 LED Strip Lights
• WS2812B LED Strip Lights

Note: This controller cannot control SK6812 RGBW LED lights or regular RGB LED strips without a driver IC.

شکل 7.1: مثالamples of Supported LED Products.

This image displays various forms of compatible LED products, including WS2812B strips, WS2811 strings, and WS2812B panels, illustrating the types of lights this controller can manage.

Figure 7.2: Supported Products Overview.

یو اوورview showing the controller alongside examples of supported LED products like WS2812B and WS2811 strips and strings, reinforcing compatibility.

8. ستونزه حل کول

9. ساتنه

The RGBZONE RF LED Controller requires minimal maintenance. Keep the controller and remote clean and dry. Avoid exposing them to extreme temperatures, humidity, or direct sunlight. Do not attempt to disassemble the units, as this will void any potential warranty.

10. تضمین او ملاتړ

For warranty information or technical support, please refer to the product packaging or contact RGBZONE customer service through the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.