پیژندنه
Welcome to the user manual for your MI Basic 2 Bluetooth Speaker. This manual provides detailed instructions on setting up, operating, maintaining, and troubleshooting your speaker to ensure optimal performance and longevity. Please read this manual carefully before using the product.
انځور: مخکینۍ برخه view of the MI Basic 2 Bluetooth Speaker, showcasing its compact, rectangular design and white finish.
د محصول ځانګړتیاوې
- تر ۷ ساعتونو پورې پلې بیک (په ۵۰٪ حجم کې)
- Highly portable and easy to carry
- د لاسي وړیا تلیفون زنګونو لپاره مدغم مایکروفون
- CVC-enabled noise reduction for clear communication
- د 1200mAh لیتیم پولیمر بیټرۍ جوړه شوې
- Effective Bluetooth range up to 10 meters
- Bluetooth version V4.2 for stable connectivity
- Rated Power: 2.5W x 2 (Total 5W)
د بسته محتويات
- 1 x MI Basic 2 Bluetooth Speaker
- 1 x د کارونکي لارښود
د تنظیم کولو لارښود
1. د سپیکر چارج کول
Before first use, it is recommended to fully charge the speaker. Connect the speaker to a power source using a compatible Micro-USB charging cable (not included). The charging indicator light will illuminate during charging. A full charge typically takes approximately 40 minutes to 1 hour.
انځور: شاته view of the MI Basic 2 Bluetooth Speaker, highlighting the Micro-USB charging port and the AUX IN port. Ensure the charging cable is connected to the Micro-USB port for power.
2. بریښنا کول/بندول
To power on the speaker, press and hold the Power button located on the top of the speaker until you hear an audible prompt or see the indicator light illuminate. To power off, press and hold the Power button again until the speaker shuts down.
انځور: پورته view of the MI Basic 2 Bluetooth Speaker, showing the circular Power button on the left and the elongated volume control buttons (+ and -) on the right.
3. د بلوتوث جوړه کول
Ensure the speaker is powered on and in pairing mode (indicated by a blinking blue light, if available). On your device (smartphone, tablet), enable Bluetooth and search for available devices. Select "MI Basic 2" from the list of devices. Once paired, the speaker will indicate a successful connection, and the indicator light will become solid blue. The effective Bluetooth range is up to 10 meters.
Image: The MI Basic 2 Bluetooth Speaker, illustrating its high-definition sound capability and up to 10 hours of playback on a single charge.
4. AUX-in Connection
For devices without Bluetooth, you can connect an audio cable (not included) from your device's audio output to the AUX IN port on the back of the speaker. The speaker will automatically switch to AUX mode when a cable is detected.
Image: The MI Basic 2 Bluetooth Speaker, highlighting its support for AUX-in connectivity and its stylish matte frame design.
عملیاتي لارښوونې
1. د میوزیک غږول
After successful Bluetooth pairing or AUX connection, start playing audio from your connected device. Use the volume buttons (+/-) on the top of the speaker to adjust the playback volume.
2. د تلیفون زنګونه
When a call comes in while connected via Bluetooth, the speaker will ring. To answer a call, briefly press the Power button. To end a call, briefly press the Power button again. The integrated microphone allows for hands-free communication with CVC-enabled noise reduction.
Image: The MI Basic 2 Bluetooth Speaker, emphasizing its built-in microphone for calls and its lightweight, portable design.
ساتنه
پاکول
Wipe the speaker with a soft, dry cloth. Do not use abrasive cleaners, alcohol, or other chemical solvents, as these may damage the surface or internal components.
ذخیره کول
Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, charge the battery periodically (e.g., every 3-6 months) to maintain its health and prolong its lifespan.
د ستونزو حل کول
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| سپیکر نه چالانېږي. | بیټرۍ ختمه شوې. | Charge the speaker fully using a compatible Micro-USB cable. |
| د بلوتوت آلې سره جوړه نشي. | Speaker is not in pairing mode or too far from the device. | Ensure speaker is powered on and in pairing mode. Move your device closer to the speaker (within 10m). Turn Bluetooth off/on on your device and try again. |
| د پلې بیک پرمهال هیڅ غږ نشته. | Volume is too low or device is not connected properly. | Increase volume on both the speaker and the connected device. Re-establish Bluetooth connection or check the AUX cable connection. |
| د زنګ وهلو کیفیت خراب دی. | Weak signal or excessive environmental noise. | Move closer to your phone. Reduce background noise for clearer communication. |
| Speaker moves due to vibrations at high volume. | High bass output on a smooth surface. | Place the speaker on a non-slip surface or a larger, stable area to prevent movement, especially at high volumes. |
تخنیکي مشخصات
| فیچر | تفصیل |
|---|---|
| ماډل | بنسټیز ۱۸۰ |
| د سپیکر ډول | بهر |
| درجه بندي ځواک | ۴۲ واټونه (۲۱ واټ x ۲) |
| د ارتباط ټیکنالوژي | بلوتوث V4.2 |
| د بلوتوټ رینج | تر 10 مترو پورې |
| د بیټرۍ ډول | لیتیم پولیمر |
| د بیټرۍ ظرفیت | 1200 mAh |
| د بیټرۍ ژوند | تر 10 ساعتونو پورې (په 40٪ حجم کې) |
| د چارج کولو وخت | Approximately 40 minutes to 1 hour |
| جوړ شوی مایکروفون | Yes, with CVC noise reduction |
| د کنټرول طریقه | Touch (buttons) |
| ابعاد (LxWxH) | 15.5 x 6 x 2.6 سانتي متره |
| د توکي وزن | 52 ګرامه |
| رنګ | سپین |
| شاملې برخې | 1 Bluetooth Speaker, 1 Manual |
د تضمین معلومات
This MI Basic 2 Bluetooth Speaker comes with a د 6 میاشتو تضمین from the date of purchase. Please retain your purchase receipt as proof of purchase for warranty claims. The warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear. For warranty service, please contact customer support as detailed below.
د پیرودونکي ملاتړ
For any questions, technical assistance, or warranty inquiries regarding your MI Basic 2 Bluetooth Speaker, please visit the official MI support website or contact their customer service hotline. Refer to the official MI webد اړیکو د خورا تازه معلوماتو او ملاتړ سرچینو لپاره سایټ.