Einhell Power X-Change 140Nm Cordless Impact Driver TE-CI 18/1 Li Solo - Instruction Manual

1. پیژندنه

This manual provides essential information for the safe and effective operation, setup, and maintenance of your Einhell Power X-Change 140Nm Cordless Impact Driver TE-CI 18/1 Li Solo. Please read these instructions carefully before using the tool and keep them for future reference. This product is designed for driving and removing screws and for light drilling tasks in wood and metal, utilizing its impact mechanism for high torque applications.

2. عمومي خوندیتوب لارښوونې

Always observe the following safety precautions when using power tools to prevent electric shock, fire, and serious injury.

• د کاري ساحې خوندیتوب: د کار ساحه پاکه او ښه روښانه وساتئ. ګډوډ یا تیاره سیمې د پیښو لامل کیږي. د بریښنا وسایل په چاودیدونکو فضا کې مه کاروئ، لکه د اور اخیستونکي مایعاتو، ګازونو یا دوړو په شتون کې.
• بریښنایی خوندیتوب: د ځمکې یا ځمکې لاندې سطحونو سره د بدن تماس څخه ډډه وکړئ لکه پایپونه، ریډیټرونه، رینجونه، او یخچالونه. که ستاسو بدن په ځمکه کې وي یا په ځمکه کې وي د بریښنا شاک ډیر خطر شتون لري.
• شخصي خوندیتوب: Always wear eye protection. Use safety glasses, goggles, or a face shield. Wear hearing protection when operating the tool for extended periods. Dress properly; do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts.
• د وسایلو کارول او ساتنه: د برېښنا وسیله مه مجبوروئ. د خپل کار لپاره سم برېښنا وسیله وکاروئ. دا به په هغه سرعت سره چې ډیزاین شوی و، کار ښه او خوندي ترسره کړي. د هر ډول سمونونو کولو، لوازمو بدلولو، یا د برېښنا وسایلو ذخیره کولو دمخه د برېښنا وسیلې څخه د بیټرۍ پیک جلا کړئ.
• د بیټرۍ پیک کارول او پاملرنه: یوازې د جوړونکي لخوا ټاکل شوي چارجر سره چارج کړئ. یو چارجر چې د یو ډول بیټرۍ کڅوړې لپاره مناسب وي ممکن د بل بیټرۍ کڅوړې سره د کارولو پرمهال د اور خطر رامینځته کړي. یوازې د ځانګړي ټاکل شوي بیټرۍ کڅوړو سره د بریښنا وسیلې وکاروئ.

3. محصول ختم شوview او ځانګړتیاوې

The Einhell TE-CI 18/1 Li Solo is a cordless impact driver designed for efficient screwdriving tasks. It is part of the Power X-Change family, allowing for interchangeable battery use with other Einhell tools.

• لوړ تورک تولید: Delivers up to 140 Nm of torque, suitable for driving large or long screws.
• د متغیر سرعت کنټرول: Electronic speed control allows for precise adjustment, ideal for delicate applications.
• 1/4" Hex Bit Mount: Features a 6.35 mm (1/4") hexagon fitting for quick and secure bit changes.
• مدغم LED رڼا: Three power LEDs provide optimal illumination of the work area.
• ارګونومیک ډیزاین: Short, lightweight design with Softgrip surfaces ensures comfortable and tireless operation.
• دوامدار ساختمان: Features an aluminum housing and rubber supports for enhanced protection and ruggedness.
• د بیلټ کلیپ: A practical belt clip is included for convenient carrying and access during work.

Figure 1: The Einhell TE-CI 18/1 Li Solo Cordless Impact Driver, illustrating its compact design and the Power X-Change battery interface (battery sold separately).

4. ترتیب کول

4.1 Battery Installation (Battery and Charger Sold Separately)

1. Ensure the battery is fully charged using an Einhell Power X-Change charger.
2. Align the battery pack with the base of the impact driver.
3. Slide the battery pack into the tool until it clicks securely into place. Ensure it is firmly seated before operation.
4. To remove the battery, press the release button(s) on the sides of the battery pack and slide it out.

4.2 Bit Insertion and Removal

The impact driver uses a 1/4" (6.35 mm) hexagon fitting for impact-resistant bits.

1. Pull the quick-change chuck sleeve forward.
2. Insert the hexagon bit fully into the chuck.
3. Release the sleeve. The bit should be securely locked in place. Pull on the bit to confirm it is properly seated.
4. To remove the bit, pull the sleeve forward again and extract the bit.

Figure 2: Detail of the 1/4" hex bit mount and the three integrated LED lights, providing clear visibility of the work area.

5. عملیاتي لارښوونې

۶.۱ د بریښنا فعالول/بندول او د سرعت کنټرول

• پيلول: Press the ON/OFF switch (trigger). The integrated LEDs will illuminate the work area.
• د سرعت سمون: The speed of the impact driver is controlled by the pressure applied to the ON/OFF switch. Pressing lightly results in lower speed, while pressing fully increases the speed up to 2300 RPM.
• ودرول: د ON/OFF سویچ خلاص کړئ.

۵.۲ د څرخېدو لوري

The direction of rotation (forward/reverse) is controlled by the selector switch located above the trigger.

• مخ په وړاندې ګرځېدل (په کې ښکته کېدل): Push the selector switch to the left.
• برعکس گردش (څرخېدل): Push the selector switch to the right.
• د قلف موقعیت: When the selector switch is in the middle position, the ON/OFF switch is locked, preventing accidental activation. Always engage the lock when not in use or when changing bits.

5.3 Using the Impact Driver

• Select the appropriate impact-resistant bit for your screw type and material.
• Position the bit firmly on the screw head.
• Start the tool by gently pressing the trigger, increasing pressure as needed. The impact mechanism will engage automatically when resistance is met, providing additional torque.
• Maintain a firm grip on the tool. The low reverse torque design helps reduce strain on the user.

Figure 3: An individual demonstrating the use of the Einhell impact driver for driving a screw into a wooden surface, highlighting its practical application.

6. ساتنه

منظم ساتنه ستاسو د اغیز ډرایور اوږد عمر او غوره فعالیت تضمینوي.

• پاکول: د هرې کارونې وروسته، د وسیلې کور د نرم، ډ سره پاک کړئamp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure ventilation openings are free from dust and debris.
• ذخیره کول: Store the impact driver and battery pack in a dry, secure location, away from direct sunlight and extreme temperatures. Ensure the battery is removed from the tool before storage.
• معاینه: Periodically check all screws and fasteners for tightness. Inspect the power tool for any signs of damage or wear. Do not use a damaged tool.

7. ستونزه حل کول

8. مشخصات

9. تضمین او ملاتړ

Einhell Power Tools come with a standard 2-year warranty. An additional 1-year warranty is available upon product registration, extending the total warranty period to 3 years. For warranty claims, technical support, or spare parts, please contact Einhell customer service or visit the official Einhell webسایټ

The intelligent ABS Battery Electronics and high-performance Li-Ion cells in Power X-Change batteries ensure efficiency, reliability, and durability.