د سونیکیک وول واه فعال حجم/واه پیډل لارښوونې لارښود

1. پیژندنه

The SONICAKE VolWah is a compact, 2-in-1 active volume and wah effect pedal designed for electric guitars. This manual provides detailed instructions for setting up, operating, and maintaining your pedal to ensure optimal performance.

2. د خوندیتوب معلومات

• Use only a DC 9V center-negative power adapter (not included).
• د واحد جلا کول یا ترمیم مه کوئ.
• د واحد د سختې تودوخې، رطوبت، یا مستقیم لمر وړانګو سره د مخ کیدو څخه ډډه وکړئ.
• د ماشومانو د لاسرسي څخه لرې وساتئ.
• د ډیر تودوخې مخنیوي لپاره مناسب هوا ورکول ډاډمن کړئ.

3. د بسته محتويات

• SONICAKE VolWah Active Volume/Wah Pedal
• د لارښود لارښود (دا سند)

4. محصول ختم شوview

Familiarize yourself with the controls and connections of your VolWah pedal.

انځور 1: SONICAKE VolWah Pedal showing input, output, DC 9V, and footswitch with numbered labels.

• 1. Input Jack: خپل ګیتار یا بل وسیله دلته وصل کړئ.
• 2. DC 9V Power Input: Connect a standard 9V DC center-negative power adapter.
• 3. Footswitch (Hidden): Press down firmly with your toe to switch between Volume and Wah modes.
• 4. MIN VOL Knob: Adjusts the minimum volume level in Volume mode (0-50% range).
• 5. Output Jack: ستاسو سره وصل شئ ampلایفیر یا نور تاثیرات پیډلونه.
• QUALITY Knob: Adjusts the Q value of the wah effect, influencing the sharpness of the wah tone.
• RANGE Knob: Selects different center frequency ranges for the wah effect.
• د LED شاخصونه: Two LEDs indicate the pedal's active mode (e.g., one for Volume, one for Wah).

5. ترتیب کول

1. د بریښنا پیوستون: Connect a DC 9V center-negative power adapter to the DC 9V input jack. The pedal does not operate on batteries.
2. د وسیلې اړیکه: Connect your electric guitar to the "Input" jack of the VolWah pedal using a standard 1/4-inch instrument cable.
3. Ampد ژوند کولو اړیکه: Connect the "Output" jack of the VolWah pedal to your amplifier or the input of your next effect pedal in the signal chain using a standard 1/4-inch instrument cable.
4. TRS Cable for Active Volume: For optimal active volume control and to avoid impedance mismatch issues, it is recommended to use a TRS (Tip-Ring-Sleeve) cable for connections where active volume control is critical.

انځور 2: Connection diagram for the VolWah pedal in a typical guitar setup.

6. عملیاتي لارښوونې

6.1 بریښنا کول / بندول

The pedal powers on automatically when connected to a 9V DC power supply. Disconnect the power supply to turn off the pedal.

6.2 Switching Modes (Volume / Wah)

The VolWah pedal features a hidden footswitch. To toggle between Volume and Wah modes, press down firmly on the toe end of the pedal until you feel a click. The LED indicators will change to show the active mode.

انځور 3: Demonstrating how to engage the footswitch by pressing the toe end of the pedal.

6.3 د حجم حالت

In Volume mode, the pedal acts as an active volume control. Move the pedal from heel (minimum volume) to toe (maximum volume) to adjust your guitar's output level.

• MIN VOL Knob: Use this knob to set the minimum volume level when the pedal is in the heel-down position. This allows for precise control over your volume swells.

6.4 Wah Mode

In Wah mode, the pedal produces a classic wah-wah effect. Move the pedal from heel (bass frequencies) to toe (treble frequencies) to sweep through the wah effect.

• QUALITY Knob: This knob adjusts the "Q" value of the wah filter. Turning it clockwise will make the wah effect sharper and more pronounced.
• RANGE Knob: Use this knob to select different center frequency ranges for the wah effect, allowing you to fine-tune the character of your wah sound.

6.5 د LED شاخصونه

The two LED lights on the pedal indicate its current operating mode. Refer to the product overview for specific LED color assignments for Volume and Wah modes.

7. کلیدي ځانګړتیاوې

• 100% Analog Volume/Wah 2-in-1 Pedal.
• Lightweight yet robust and well-built casing.
• Active Volume Control prevents impedance mismatch issues.
• وینtage Wah Sound style.
• Seamless switching between Volume & Wah via hidden footswitch.
• Dual LED indicators for clear mode identification.

8. مشخصات

انځور 4: Dimensions of the SONICAKE VolWah pedal.

9. ساتنه

• پاکول: Use a soft, dry cloth to clean the pedal. Do not use liquid cleaners or solvents.
• ذخیره کول: Store the pedal in a dry, cool place away from direct sunlight when not in use.
• اړیکې: په منظم ډول د کیبل ټولې اړیکې د خرابوالي لپاره وګورئ.

10. ستونزه حل کول

11. تضمین او ملاتړ

For warranty information and technical support, please refer to the official SONICAKE website or contact your local dealer. Keep your purchase receipt as proof of purchase.