پیژندنه
This manual provides essential information for the installation, operation, and maintenance of the TOPENS EKPKMJ1B PCB Print Circuit Control Board. This control board is designed as a replacement component for specific TOPENS swing gate opener models. Please read these instructions thoroughly before proceeding with installation or operation to ensure proper function and safety.
محصول پای ته ورسیدview
The TOPENS EKPKMJ1B PCB Print Circuit Control Board serves as the central control unit for compatible TOPENS swing gate openers. It manages the gate's movement, safety features, and various operational settings. This board is specifically compatible with TOPENS A5, A5S, A8, A8S, A5131, A8131, AT6131, AT6131S, AT12131, and AT12131S single swing gate opener models.
An image showing the TOPENS EKPKMJ1B PCB Print Circuit Control Board. The board is green with various electronic components, including relays, capacitors, resistors, and terminal blocks. Key labels visible include 'EKPKMJ1B', 'Fuse in the holder', 'ON DIP' switches, and connection points for 'POWER', 'FULL', 'CODE', 'AUTO CLOSE', and 'SOFT STOP'.
مشخصات
- د ماډل شمیره: EKPKMJ1B
- Compatible Gate Openers: TOPENS A5, A5S, A8, A8S, A5131, A8131, AT6131, AT6131S, AT12131, AT12131S
- جوړونکی: Hangzhou Sanyuan Tools Co.,LTD
- د توکي وزن: 5.6 اونس
- د بسته ابعاد: 6.54 x 4.61 x 2.05 انچه
- شاملې برخې: 1 x Print Circuit Control Board
- رنګ: شین
نصب او تنظیم کول
لومړی خوندیتوب: Before beginning any installation or replacement, ensure that the power supply to the gate opener system is completely disconnected. Failure to do so may result in electric shock or damage to the equipment.
- چمتووالی: Carefully remove the old control board from its housing. Note the position and connection of all wires before disconnecting them. Taking photos can be helpful.
- بدلول: Install the new TOPENS EKPKMJ1B control board into the designated slot. Ensure it is securely fastened.
- تارونه: Reconnect all wires to their corresponding terminals on the new board. Refer to the wiring diagram provided in your specific TOPENS gate opener manual for accurate connections. Pay close attention to power, motor, and accessory connections.
- د DIP سویچ تنظیمات: The board features DIP switches (labeled "ON DIP" in the image) for configuring various operational parameters. Consult your gate opener's instruction manual to set these switches correctly for your specific gate type and desired functions (e.g., auto-close, soft stop).
- ابتدايي ځواک: Once all connections are secure and DIP switches are set, restore power to the gate opener system.
- ازموینه: Perform initial tests of the gate's open and close functions. Adjust any settings as needed according to your gate opener's manual.
For detailed wiring diagrams and specific programming instructions, always refer to the comprehensive manual provided with your TOPENS A5(S), A8(S), A5131, A8131, AT6131(S), or AT12131(S) swing gate opener.
عملیات
The EKPKMJ1B control board is an integral part of your TOPENS swing gate opener system. Its operation is directly controlled by the gate opener's remote controls, keypads, or other access devices. The board processes these commands to control the gate motor(s).
- شاخصونه: The board includes LED indicators (e.g., POWER, FULL, CODE) that provide visual feedback on the system's status. Refer to your gate opener manual for the meaning of each indicator.
- د کنټرول تڼۍ: Small push buttons (e.g., AUTO CLOSE, SOFT STOP) are present on the board for direct configuration or testing. These are typically used during initial setup or troubleshooting.
For specific operational procedures, including remote control programming and setting gate limits, please consult the user manual for your complete TOPENS swing gate opener system.
ساتنه
Regular maintenance helps ensure the longevity and reliable performance of your control board and gate opener system.
- وچ ساتل: Ensure the control board's enclosure remains sealed and dry to prevent moisture damage.
- پاکوالی: Periodically inspect the board for dust or debris accumulation. If necessary, gently clean with a soft, dry brush or compressed air. Do not use liquids.
- د پیوستون چک: Annually, or if issues arise, inspect all wire connections to the board to ensure they are secure and free from corrosion.
- د فیوز معاینه: The board contains a fuse (labeled "Fuse in the holder") for circuit protection. If the gate opener loses power unexpectedly, check this fuse. Replace it only with a fuse of the identical type and rating.
د ستونزو حل کول
If you encounter issues with your gate opener system after installing the EKPKMJ1B control board, consider the following general troubleshooting steps:
- ځواک نشته: Verify the main power supply to the gate opener. Check the fuse on the control board.
- دروازه ځواب نه ورکوي: Ensure all wiring connections are secure. Check remote control batteries. Verify DIP switch settings are correct.
- بې نظمه چلند: Re-check all wiring and DIP switch configurations against your gate opener's manual.
- Refer to Gate Opener Manual: For specific error codes or detailed diagnostic procedures, always consult the troubleshooting section of your TOPENS swing gate opener's main instruction manual.
If problems persist after following these steps and consulting your gate opener manual, contact TOPENS technical support for assistance.
تضمین او ملاتړ
تضمین: The TOPENS EKPKMJ1B PCB Print Circuit Control Board is covered by a 12-month warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
تخنیکي ملاتړ: TOPENS offers professional technical support to assist with any questions or issues you may encounter during the installation, setup, or operation of your control board. For assistance, please refer to the contact information provided in your original gate opener documentation or visit the official TOPENS webسایټ
