Secukey SK4-W Standalone Access Control System

1. پیژندنه

This user manual provides comprehensive instructions for the installation, operation, and maintenance of the Secukey SK4-W Standalone Access Control System. Please read this manual carefully before installation and use to ensure proper functionality and safety.

The Secukey SK4-W is a robust, IP66-rated access control device designed for outdoor use, featuring RFID card and PIN code access. It is an ideal solution for securing doors, gates, and other entry points.

2. محصول ختم شوview

2.1 کلیدي ځانګړتیاوې

• IP66 Waterproof and Anti-Vandal Design: Suitable for harsh outdoor environments.
• د لاسرسي ډیری طریقې: Supports RFID card only, PIN code only, or Card + PIN for enhanced security.
• د کاروونکي لوړ ظرفیت: Manages up to 1000 users.
• Integrated Relay: Built-in NO, NC, Com relay for direct door lock control.
• Adjustable Output Times: Programmable lock output time (1-99 seconds) and alarm output time (1-3 minutes).
• Wiegand 26-bit Interface: Supports external Wiegand readers, exit buttons, and alarms.
• Latch Mode: Allows the door or gate to remain open.
• پراخه ټوکtagد لړيو: Operates on 12~28V AC/DC.
• شاته کیپډ: په ټیټ رڼا شرایطو کې د لید لید ډاډمن کوي.
• دوامدار ساختمان: Zinc alloy casing with powder coating.

۱.۱ برخې پکې شاملې دي

• 1 x Secukey SK4-W Standalone Access Control Device (RFID/PIN)
• 1 x Master Add Card
• 1 x Master Delete Card
• 1 x د کارونکي لارښود

2.3 محصول Views

شکل 1: مخکی view of the SK4-W unit, highlighting the keypad and Secukey branding.

شکل ۳: زاویه لرونکی view of the SK4-W, providing a perspective of its slim profile.

شکل 3: اړخ view of the SK4-W unit.

شکل ۴: بل اړخ view of the SK4-W unit.

شکل 5: شاته view of the SK4-W unit, displaying the integrated wiring for installation.

3. ترتیب او نصب کول

3.1 د آلې نصبول

The SK4-W is designed for surface mounting. Choose a secure location near the door or gate, ensuring it is within reach for users and protected from direct impact. Use appropriate screws and wall plugs for the mounting surface.

3.2 د تارونو ډیاګرام

The device requires a 12~28V AC/DC power supply (not included). Connect the wires according to the diagram provided in the full manual. Ensure all connections are secure and insulated to prevent short circuits.

• د بریښنا ننوتل: Connect to 12~28V AC/DC power source.
• Lock Output (NO/NC/COM): Connect to your electric lock.
• د الارم وتنه: Connect to an external alarm system (if applicable).
• Wiegand In/Out: For connecting external Wiegand readers or other Wiegand devices.
• د وتلو تtonۍ: Connect a push-to-exit button for convenient egress.

For detailed wiring schematics, please refer to the comprehensive wiring diagram included in the product packaging.

4. عملیاتي لارښوونې

4.1 Initial Setup and Master Cards

Upon first power-up, the device will be in factory default mode. Use the included Master Add Card and Master Delete Card to manage user access.

• د کاروونکو اضافه کول: Present the Master Add Card, then present the new user's RFID card or enter their PIN.
• د کاروونکو حذف کول: Present the Master Delete Card, then present the user's RFID card or enter their PIN to be deleted.

4.2 Access Modes

The SK4-W supports three primary access modes:

1. Card Only Mode: Users gain access by presenting a valid RFID card.
2. PIN Only Mode: Users gain access by entering a valid 4-6 digit PIN code.
3. Card + PIN Mode: Users must present a valid RFID card and then enter their corresponding PIN code for access. This mode offers the highest security.

Refer to the full programming guide for instructions on how to switch between access modes and manage user PINs.

4.3 Visitor PINs

The SK4-W supports up to 10 visitor PINs, which can be set to be valid for 1 to 10 uses. This feature is useful for temporary access for guests or service personnel.

Figure 6: The SK4-W supports visitor PINs and is IP66 waterproof, suitable for outdoor installation.

4.4 Latch Mode

The latch mode allows the door or gate to remain unlocked for an extended period, which can be useful during peak hours or for maintenance. Consult the programming manual for activation and deactivation procedures.

5. ساتنه

The Secukey SK4-W is designed for minimal maintenance due to its robust construction and IP66 rating. However, regular checks can prolong its lifespan and ensure optimal performance.

• پاکول: Wipe the keypad and casing د نرم سره، damp ټوکر. د کثافاتو پاکوونکو یا محلولونو څخه ډډه وکړئ.
• د پیوستون چک: Periodically inspect wiring connections for any signs of wear, corrosion, or loosening.
• د فرم ویئر تازه معلومات: جوړونکي وګورئ webد هر ډول شته فرم ویئر تازه معلوماتو لپاره سایټ.

Figure 7: The SK4-W is designed to withstand extreme operating temperatures, from -40°C to 60°C.

6. ستونزه حل کول

If the problem persists, please contact Secukey technical support for assistance.

Figure 8: Wiegand 26-bit input and output signal timing diagram.

7. مشخصات

8. تضمین او ملاتړ

Secukey products are manufactured to high quality standards. For warranty information and technical support, please refer to the warranty card included with your product or visit the official Secukey webسایټ

د اړیکو معلومات:

• جوړونکی: سیکوکی
• Webسایټ: www.secukey.com (بېلګهample لینک، اصلي لینک ممکن توپیر ولري)
• د پیرودونکو خدمت: د محصول بسته بندۍ ته مراجعه وکړئ یا webد سیمه ایز ملاتړ اړیکو لپاره سایټ.

مهرباني وکړئ د تضمین ادعاګانو لپاره د پیرود ثبوت وساتئ.