1. پیژندنه
The Einhell GE-SP 3046 RB is a versatile multi-function pump designed for efficient rainwater collection and drainage. Its robust construction and intelligent features make it ideal for various applications around the home and garden, such as emptying rain barrels, tanks, or small ponds, and transferring water for irrigation. This manual will guide you through the proper use and care of your pump.
Figure 1.1: Einhell GE-SP 3046 RB Multi-function Pump with Accessories.
2. د خوندیتوب لارښوونې
Always read and follow all safety instructions before operating the pump.
- ډاډ ترلاسه کړئ چې د بریښنا رسولو حجم سره سمون لريtage د پمپ د درجه بندي په لیبل کې مشخص شوی.
- Never operate the pump with a damaged power cable or plug. Have any damage repaired by a qualified electrician.
- پمپ د بریښنا کیبل په واسطه مه پورته کوئ یا یې مه وړئ.
- ماشومان او غیر مجاز اشخاص د عملیاتي ساحې څخه لرې وساتئ.
- د اور اخیستونکي، زنګ وهونکي یا چاودیدونکي مایعات مه پمپ کوئ.
- Ensure the pump is fully submerged in water during operation to prevent dry running and overheating.
- Disconnect the pump from the power supply before performing any maintenance, cleaning, or when not in use.
- پمپ له یخنۍ څخه خوندي کړئ.
3. د محصول اجزا
The Einhell GE-SP 3046 RB pump comes with several key components for its multi-functional use:
- د پمپ واحد: The main submersible pump with integrated motor and power cable.
- فلوټ سویچ: Automatically activates/deactivates the pump based on water level.
- انعطاف منونکی ګوزنیک: Allows for precise water discharge direction.
- Adjustable Aluminum Tube: Provides variable height for water extraction, especially from deep containers.
- Rain Stand: A stable base for positioning the pump and extension tube in rain barrels.
- Integrated Cable Rewind: Convenient storage for the power cable on the pump housing.
- Extension Tube Storage: Dedicated compartment on the pump housing for storing extension tubes.
Figure 3.1: Close-up of the Pump Unit.
Figure 3.2: Flexible Gooseneck.
Figure 3.3: Extension Tube Storage.
4. ترتیب کول
Follow these steps to set up your Einhell pump for operation:
- Assemble the Extension: If using the pump for rainwater collection from a barrel, attach the adjustable aluminum tube to the pump's outlet. Then, connect the flexible gooseneck to the top of the aluminum tube.
- د پمپ ځای ونیسئ: Place the pump unit into the water source (e.g., rain barrel, tank, or flooded area). Ensure the pump is stable and fully submerged. The minimum operating space required is approximately 40 x 40 cm, with a pump diameter of 24 cm.
- Adjust the Float Switch: The float switch controls the automatic on/off function of the pump. Adjust its position along the cable to set the desired minimum and maximum water levels for operation. A higher float position will require more water to activate the pump.
- د بریښنا سره نښلول: Plug the pump's power cable into a properly grounded electrical outlet. Ensure the outlet is protected by a residual current device (RCD) for safety.
Figure 4.1: Minimum Operating Space.
Figure 4.2: Adjusting the Float Switch.
5. چلول
Once set up, the Einhell GE-SP 3046 RB pump operates efficiently:
- اتوماتیک عملیات: The pump will automatically start when the water level rises to the activation point set by the float switch and stop when the water level drops below the deactivation point.
- لاسي عملیات: For continuous operation regardless of water level (e.g., for complete drainage), the float switch can often be fixed in an 'on' position. Refer to the specific instructions for your float switch model.
- Water Transfer: Direct the flexible gooseneck or connected hose to where you want the water to be discharged. The pump can deliver up to 4,600 liters per hour with a maximum delivery height of 11 meters.
Figure 5.1: Pump in use for rainwater collection.
6. ساتنه
منظم ساتنه ستاسو د پمپ اوږد عمر او غوره فعالیت تضمینوي:
- پاکول: After each use, especially when pumping dirty water, rinse the pump with clean water. Remove any debris or foreign objects from the intake area at the bottom of the pump.
- د خنډونو لپاره وګورئ: Periodically inspect the pump's intake and outlet for any blockages that could impede water flow.
- د کیبل معاینه: Regularly check the power cable for any signs of wear, cuts, or damage.
- د ژمي ذخیره کول: د لومړۍ یخنۍ څخه مخکې، د پمپ ټولې اوبه په بشپړه توګه وچې کړئ ترڅو د کنګل کیدو څخه زیان ونه رسیږي. پمپ په وچ، یخ نه پاک ځای کې وساتئ.
7. ستونزه حل کول
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| پمپ پیل نه کوي | بریښنا نشته Float switch not activated موټر ډیر بار شوی / ډیر ګرم شوی | د بریښنا اتصال او فیوز وګورئ Adjust float switch position or manually activate Disconnect power, let cool down, check for blockages |
| د کم جریان کچه | Partial blockage in intake/outlet Hose kinked or too long/narrow د اوبو ناکافي کچه | Clean intake and outlet Check hose for kinks, use appropriate diameter Ensure pump is adequately submerged |
| پمپ په دوامداره توګه پرمخ ځي | Float switch stuck in 'on' position Water level not dropping below deactivation point | Check float switch for free movement Ensure proper float switch adjustment for deactivation |
8. مشخصات
| فیچر | مشخصات |
|---|---|
| ماډل | GE-SP 3046 RB |
| د مقالې شمیره | 4170438 |
| ځواک | 350 W |
| والیtage | 230 وی |
| اعظمي د بهېدنې کچه | 4,600 L/h (4.6 Litres per second) |
| مکس د سپارلو لوړوالی | 11 متر |
| Max. Impurity Size | 2.5 ملي متره |
| د کیبل اوږدوالی | 10 متر |
| مواد | Impact-resistant PVC Plastic |
| وزن | 3.8 کیلو ګرامه |
| ابعاد (L x W x H) | 17 x 23 x 51 سانتي متره |
9. تضمین او ملاتړ
Einhell products are manufactured with high-quality materials and undergo strict quality controls. For information regarding warranty terms and conditions, please refer to the warranty card included with your product or visit the official Einhell website. For technical support, spare parts, or service inquiries, please contact Einhell customer service directly. Keep your purchase receipt as proof of purchase.
