1. پیژندنه
The MOXA NPort 5232-T is a 2-port serial device server designed for industrial automation applications. It enables serial devices (RS-422/485) to be connected to an Ethernet network, allowing for remote access and control over TCP/IP. This model supports 10/100 Fiber Ethernet connectivity and operates reliably in wide temperature ranges from -40°C to 75°C, making it suitable for harsh industrial environments. It supports data rates up to 230.4 Kbps.
Figure 1: MOXA NPort 5232-T 2-Port Device Server. This image displays the device from a slight angle, highlighting its compact form factor and various connection ports, including the fiber Ethernet port and serial ports.
2. د خوندیتوب معلومات
Please read and understand all safety instructions before installing or operating the device. Failure to follow these instructions may result in injury or damage to the equipment.
- د بریښنا رسولو حجم ډاډمن کړئtage په ټاکل شوي حد کې دی.
- Do not expose the device to moisture or extreme temperatures outside its operating range.
- د هر ډول ساتنې یا نصبولو پروسیجرونو ترسره کولو دمخه بریښنا قطع کړئ.
- یوازې وړ پرسونل باید دا تجهیزات نصب او خدمت کړي.
- Use appropriate grounding techniques to prevent electrical hazards.
3. د بسته محتويات
د نصبولو دمخه، تصدیق کړئ چې په بسته کې لاندې توکي شامل دي:
- MOXA NPort 5232-T Device Server
- د چټک نصبولو لارښود
- د تضمین کارت
- د بریښنا د ننوتلو لپاره ترمینل بلاک
- Wall mounting kit (optional, may vary by region)
که چیرې د دې توکو څخه کوم یو ورک یا زیانمن شوی وي، مهرباني وکړئ سمدلاسه د خپل پلور استازي سره اړیکه ونیسئ.
4. د هارډویر توضیحات
۳.۲ د مخکینۍ تختې ترتیب
The front panel of the NPort 5232-T typically includes LED indicators for power, Ethernet link/activity, and serial port activity. Specific models may also feature a reset button.
- PWR LED: Indicates power status (On: Power is supplied; Off: No power).
- LAN LED: Indicates Ethernet link/activity (On: Link established; Blinking: Data activity).
- Serial Port LEDs (Tx/Rx): Indicate data transmission (Tx) and reception (Rx) on each serial port.
4.2 Rear/Side Panel Connectors
The rear or side panel houses the primary connection interfaces:
- د بریښنا ننوتل: Terminal block for DC power input.
- ایترنیټ پورټ: 10/100BaseFX fiber optic port (SC connector type).
- سیریل پورټونه: Two RS-422/485 serial ports (DB9 male connectors).
5. ترتیب کول
5.1 د آلې نصبول
The NPort 5232-T can be mounted on a DIN-rail or wall-mounted using the provided kit. Ensure adequate ventilation around the device.
- For DIN-rail mounting, attach the DIN-rail clip to the device and snap it onto the DIN-rail.
- For wall mounting, secure the wall mounting brackets to the device, then use screws to fix the device to a sturdy surface.
5.2 د بریښنا نښلول
Connect the power source to the terminal block. The NPort 5232-T supports a wide range of DC power inputs. Refer to the specifications for exact voltage اړتیاوې.
- ډاډ ترلاسه کړئ چې د نښلولو دمخه د بریښنا رسولو بند دی.
- Connect the positive (+) wire to the V+ terminal and the negative (-) wire to the V- terminal.
- Connect the ground wire to the FG (Frame Ground) terminal for proper grounding.
5.3 Network Connection (Fiber Ethernet)
Connect the NPort 5232-T to your network using a fiber optic cable.
- Insert the SC fiber optic connector into the Ethernet port on the device.
- Connect the other end of the fiber optic cable to your network switch or router.
- Verify the LAN LED illuminates to indicate a successful link.
5.4 Serial Device Connection
Connect your RS-422/485 serial devices to the DB9 serial ports.
- Use appropriate RS-422/485 cabling.
- Ensure correct pin assignments for your serial devices. Refer to the NPort 5232-T's pinout diagram in the full technical manual for details.
6. چلول
6.1 ابتدايي ترتیب
The NPort 5232-T can be configured via a web browser or Moxa's NPort Windows utility.
- ډیفالټ IP پته: The device typically has a default IP address (e.g., 192.168.127.254). Refer to the Quick Installation Guide for the exact default.
- لاسرسی Web کنسول: خلاص a web browser and enter the device's IP address. Log in using the default username and password (e.g., admin/moxa).
- د شبکې ترتیبات: Configure the IP address, subnet mask, and gateway to match your network environment.
- د سیریل پورټ ترتیبات: Configure each serial port's parameters (baud rate, data bits, parity, stop bits, flow control) to match the connected serial devices.
- عملیاتي طریقې: Select the desired operating mode (e.g., Real COM mode, TCP Server, TCP Client, UDP) based on your application requirements.
6.2 د معلوماتو اړیکه
Once configured, the NPort 5232-T will transparently convert serial data to Ethernet packets and vice-versa, allowing your host PC or application to communicate with serial devices over the network.
7. ساتنه
7.1 پاکول
وسیله پاکه او له دوړو څخه پاکه وساتئ. د پاکولو لپاره نرم، وچ ټوکر وکاروئ. مایع یا ایروسول پاکوونکي مه کاروئ.
7.2 د فرم ویئر تازه معلومات
په دوره یي ډول موکسا وګورئ website for firmware updates. Firmware updates can provide new features, performance improvements, and security enhancements.
- Download the latest firmware from the official Moxa support page for your specific model.
- وسیله ته لاسرسی ومومئ web کنسول
- Navigate to the firmware upgrade section and follow the on-screen instructions to upload and install the new firmware.
- Do not power off the device during the firmware upgrade process.
8. ستونزه حل کول
دا برخه د هغو عامو ستونزو حلونه وړاندې کوي چې تاسو ورسره مخ کیدی شئ.
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| وسیله نه چلیږي. | د برېښنا رسولو نشته، ناسم حجمtage, faulty power adapter/cable. | Check power connections, verify power supply voltage, try a different power source. |
| No Ethernet link (LAN LED off). | Faulty fiber cable, incorrect fiber connection, network switch issue. | Check fiber cable integrity, ensure correct SC connector insertion, verify network switch port status. |
| لاسرسی نشي کولی web کنسول | Incorrect IP address, network configuration mismatch, firewall blocking. | Verify device IP address, ensure PC is on the same subnet, temporarily disable PC firewall, try pinging the device. |
| Serial communication failure. | Incorrect serial port settings, wrong cabling, device driver issues on host PC. | Check baud rate, data bits, parity, stop bits, flow control. Verify RS-422/485 wiring. Ensure correct COM port mapping if using Real COM mode. |
If the problem persists, perform a factory reset (refer to the full manual for instructions) or contact Moxa technical support.
9. مشخصات
| فیچر | تفصیل |
|---|---|
| ماډل | این پورټ ۵۲۱۰-ټي |
| ایترنیټ بندرونه | 1 x 10/100BaseFX (SC connector) |
| سیریل پورټونه | 2 x RS-422/485 (DB9 male) |
| Serial Communication Speed | تر 230.4 Kbps پورې |
| د عملیاتي حرارت درجه | -40°C ته 75°C (-40°F ته 167°F) |
| د بریښنا انډول | 12 to 48 VDC (via terminal block) |
| ابعاد | 7.09 x 4.72 x 1.97 انچه (180 x 120 x 50 mm) |
| وزن | ۶ پونډه (۳ کیلو ګرامه) |
| جوړونکی | MOXA |
| نیټه لومړی شتون لري | د مارچ 31، 2018 |
10. تضمین او ملاتړ
MOXA products are typically covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official MOXA webسایټ
For technical support, product documentation, and driver downloads, please visit the MOXA support portal. You can find contact information for regional support centers on their webسایټ
- Official MOXA Webسایټ: www.moxa.com
- د ملاتړ پورټل: Refer to the MOXA website for the dedicated support section.
