محصول پای ته ورسیدview
The iOttie Easy One Touch Mini Dash & Windshield mount is a compact and simple smartphone mounting solution. It securely holds your device, allowing for safe driving. This mount is universally compatible with all smartphones.
کلیدي ځانګړتیاوې:
- EASY ONE TOUCH LOCK RELEASE: Patented Easy One Touch mechanism allows quick one-hand open and close operation.
- یونیورسل ماونټینګ: Holds all phone and case combinations from 2.3" - 3.5".
- STRONG SUCTION: Suction cup offers high stick strength, can be paired with separate dashboard pad for added strength.
- د تعدیل وړ VIEWING: Cradle rotates at the swivel Ball 360 degree for optimal viewing.
- د تړون ډیزاین: Small Compact design allows to take up minimal space on your desired mounting location.
Image: The iOttie Easy One Touch Mini Dash & Windshield Car Mount with a smartphone mounted, showcasing its compact design and secure hold.
د تنظیم کولو لارښوونې
- Connect Cradle to Ball Joint: Attach the mounting cradle to the ball joint of the suction cup arm. Ensure it is securely tightened.
- د نصب کولو سطحه چمتو کړئ: Clean the desired dashboard or windshield area thoroughly. Ensure the surface is free of dust and debris.
- Remove Suction Cup Cover: Peel off the plastic protective cover from the suction cup.
- وسیله نصب کړئ:
- For Dashboard Mounting: Place the mount on a hard dashboard surface. Push the lever down to lock the suction cup in place. (Note: For soft dashboards, an iOttie Adhesive dashboard pad, sold separately, is recommended to prevent marks).
- For Windshield Mounting: Place the mount on the windshield with the tab facing up. Push the lever down to lock the suction cup in place.
- سمون Viewزاویه: Turn the pivot and cradle knobs to adjust the arm and cradle for optimal viewing. Ensure the iOttie logo on the cradle faces up.
Image: Visual guide demonstrating the Easy One Touch lock and release mechanism for phone insertion and removal.
Video: Official iOttie Easy One Touch Mini Dash & Windshield Mount setup and usage guide. This video demonstrates connecting components, mounting on the dashboard and windshield, and adjusting the viewزاویه.
عملیاتي لارښوونې
- ستاسو د سمارټ فون نصب کول:
- Press the release bars on the sides of the cradle to open the locking side arms.
- Place your smartphone against the Easy One Touch Trigger button located in the center of the cradle. The arms will automatically close and secure your device.
- ستاسو د سمارټ فون لرې کول:
- Press the release bars on the sides of the cradle to unlock the side arms.
- Gently remove your smartphone from the mount.
- تعدیل کول Viewing Angle During Use: The cradle rotates 360 degrees at the swivel ball joint. Loosen the pivot knob to adjust the angle, then tighten to secure.
Image: Illustration of the mount's optimal viewing angles, demonstrating its 225-degree pivot capability.
ساتنه
- د سکشن کپ پاکول: If the suction cup loses its stickiness, rinse it with warm water and let it air dry completely. This will restore its adhesive properties.
- Cleaning the Mount: غره د نرم، d سره پاک کړئamp د دوړو او ګردو د لرې کولو لپاره ټوکر. د سختو کیمیاوي موادو یا د کثافاتو پاکوونکو کارولو څخه ډډه وکړئ.
- ذخیره کول: When not in use for extended periods, store the mount in a cool, dry place away from direct sunlight.
د ستونزو حل کول
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| Mount not sticking to dashboard/windshield. | Dirty surface; suction cup lost stickiness; unsuitable surface material. | Clean surface thoroughly. Rinse suction cup with water and air dry. For soft dashboards, use an adhesive dashboard pad (sold separately). Ensure surface temperature is above 40°F before installation. |
| تلیفون په خوندي ډول نه دی نیول شوی. | Side arms not fully closed; phone too large/small for universal compatibility. | Ensure phone is pressed firmly against the Easy One Touch Trigger. Verify phone width is within 2.3" - 3.5". |
| Mount wobbles or moves during driving. | Suction cup not properly locked; pivot/cradle knobs loose. | Ensure suction cup lever is fully pushed down. Tighten all pivot and cradle knobs securely. |
مشخصات
- د محصول ابعاد: 4.33 x 2.76 x 5.51 انچه
- د توکي وزن: 8.4 اونس
- د ماډل شمیره: HLCRIO128
- رنګ: تور
- د نصب کولو ډول: Dashboard / Windshield
- مطابقت لرونکي وسایل: Smartphones (2.3" - 3.5" width)
- جوړونکی: iOttie
- د اصلي هیواد: کوریا، جمهوریت
- د لومړي شتون نیټه: د مارچ 23، 2018
تضمین او ملاتړ
For detailed warranty information and customer support, please refer to the official iOttie webسایټ یا ستاسو د محصول سره چمتو شوي د کارونکي لارښود.
د کارونکي لارښود ډیجیټل نسخه موندل کیدی شي دلته.
قانوني اعلان: Before installation, we recommend that both surface area and the product itself have a temperature above 40F. In addition, please let the dashboard pad sit for 30 minutes, before installing. PLEASE NOTE: If you have a leather dashboard please mount on your windshield for a stronger hold. iOttie is not responsible for misuse or damage to location of mounting.
