1. محصول ختم شوview
The Geberit Keramag Acanto wash basin, model 500.620.01.2, is a modern bathroom fixture designed for countertop installation. It features an integrated overflow and a pre-drilled tap hole, making it suitable for various faucet configurations. The basin measures 600 x 480 mm and is finished in white with KeraTect, a special ceramic glaze for enhanced durability and hygiene.
کلیدي ځانګړتیاوې:
- مدغم جریان: Prevents water from spilling over the basin رم
- Single Tap Hole: Designed for a single-lever mixer or similar faucet.
- ابعاد: 600 mm width x 480 mm depth.
- KeraTect Finish: A durable, easy-to-clean ceramic surface.
- مطابقت: Can be combined with Acanto vanity units (e.g., 500.609.01.2, 500.609.16.1).
Figure 1: The Keramag Acanto wash basin، شوکasing its modern design and integrated faucet.
Figure 2: The wash basin seamlessly integrated with a compatible vanity unit.
2. ترتیب او نصب کول
This section provides general guidelines for the installation of the Keramag Acanto wash basin. Professional installation is recommended. Ensure all local plumbing codes are followed.
2.1. مخکې له دې چې تاسو پیل کړئ
- Inspect the Basin: د نصبولو دمخه د کوم زیان لپاره وګورئ.
- د وسایلو راټولول: You will need standard plumbing tools, sealant, and mounting hardware (if not included).
- د اوبو رسولو بندول: ډاډ ترلاسه کړئ چې د نصب کولو ساحې ته د اوبو رسولو اصلي لاره بنده ده.
2.2. د نصبولو پړاوونه
- موقعیت: Carefully place the wash basin on the desired countertop or vanity unit. Ensure it is level and aligned.
- نښه کول: Mark the positions for the drain and faucet holes on the countertop if not pre-drilled. Refer to the dimension drawings for precise measurements.
- د نل نصبول: Install the faucet into the basin's tap hole according to the faucet manufacturer's instructions. Connect the hot and cold water supply lines.
- د اوبو ایستلو مجلس: Install the pop-up drain assembly into the basin's drain hole. Apply plumber's putty or silicone sealant as required to ensure a watertight seal.
- د اوبو سره نښلول: Connect the drain assembly to the P-trap and the main waste pipe. Ensure all connections are tight and leak-free.
- د B خوندي کولasin: Apply a bead of silicone sealant around the base of the basin where it meets the countertop to secure it and prevent water ingress.
- د اوبو رسولو: Turn on the main water supply and check for any leaks at the faucet and drain connections.
شکل ۱: پورته څخه ښکته view with key dimensions for installation planning.
شکل 4: اړخ view with depth and height dimensions.
شکل 5: مخکی view with width and drain placement dimensions.
3. عملیاتي لارښوونې
The Keramag Acanto wash basin is designed for standard bathroom use. Operate the faucet according to its manufacturer's instructions to control water flow and temperature.
- د اوبو جریان: Adjust the faucet handle to achieve the desired water flow.
- د تودوخې کنټرول: Mix hot and cold water to reach a comfortable temperature.
- د جریان فعالیت: The integrated overflow is designed to prevent minor overfilling. Do not rely on it as a primary means of preventing floods. Always monitor water levels when filling the basin.
- د اوبو ایستلو عملیات: Use the pop-up drain mechanism to open or close the drain as needed.
4. پاملرنه او ساتنه
Proper care will ensure the longevity and pristine appearance of your Keramag Acanto wash basin, especially with its KeraTect finish.
4.1. ورځني پاکول
- ب پاک کړئasin د نرم، دamp cloth after each use to prevent water spots and soap residue buildup.
- For general cleaning, use mild soap or a non-abrasive bathroom cleaner diluted with water.
- Rinse thoroughly with clean water and dry with a soft cloth to maintain shine.
4.2. KeraTect Finish Care
The KeraTect ceramic glaze is highly durable and hygienic. To preserve its properties:
- د خړوبولو څخه ډډه وکړئ: Do not use abrasive cleaners, scouring pads, or harsh chemicals (e.g., strong acids, alkalis, or bleach) as these can damage the KeraTect surface.
- داغ لرې کول: For stubborn stains, use a ceramic-safe cleaner and a soft sponge. Always test in an inconspicuous area first.
4.3. Drain Maintenance
- Regularly remove hair and debris from the drain to prevent clogs.
- If a clog occurs, use a plumbing snake or a chemical drain cleaner specifically designed for bathroom drains. Follow product instructions carefully.
5. ستونزه حل کول
This section addresses common issues you might encounter with your wash basin.
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| ورو اوبه ایستل | په ویاله کې د ویښتانو یا کثافاتو راټولیدل. | Remove the pop-up stopper and clear any obstructions. Use a drain cleaner if necessary. |
| Leaks Around Faucet Base | Loose faucet connections or worn seals. | Tighten faucet mounting nuts. Replace O-rings or gaskets if worn. |
| Leaks Under Basin (P-trap) | Loose P-trap connections or damaged seals. | Tighten slip nuts on the P-trap. Inspect and replace rubber washers if cracked or worn. |
| Water Spots/Stains | Hard water deposits or soap residue. | Clean regularly with a mild, non-abrasive cleaner. For hard water, use a vinegar solution (diluted) and rinse thoroughly. |
6. د محصول مشخصات
Detailed technical specifications for the Geberit Keramag Acanto wash basin.
- نښه: Geberit
- جوړونکی: Keramag
- د ماډل شمیره: 500.620.01.2
- رنګ: سپین
- سټایل: عصري
- د نصب ډول: کاونټر ټاپ
- د پای ډول: Brushed (referring to the overall aesthetic, not the ceramic surface)
- د توکي وزن: 15.5 کیلوګرامه
- د بنسټ پلنوالی: 600 ملی متره
- شکل: مستطیل
- د اوبو لګولو ډول: پاپ اپ
- ځانګړتیاوې: With overflow, with tap hole, KeraTect White finish
7. تضمین او ملاتړ
7.1. د تضمین معلومات
Specific warranty details for the Geberit Keramag Acanto wash basin are typically provided at the point of purchase or can be found on the official Geberit or Keramag webسایټ. مهرباني وکړئ د تضمین ادعاوو لپاره د پیرود ثبوت وساتئ.
7.2. د پیرودونکي ملاتړ
For technical assistance, spare parts, or further inquiries, please contact Geberit customer service. Contact information can usually be found on the manufacturer's official webپه سایټ یا د بسته بندۍ موادو کې.