1. پیژندنه
Thank you for choosing the Kaise SK-7830 Digital Current Clamp Meter. This device is designed for safe and accurate measurement of electrical current without direct contact with the conductor. It features a 4000-count display and is rated for CAT III 300V applications, making it suitable for various industrial and scientific electrical testing needs.
Please read this manual thoroughly before operating the meter to ensure proper use and to prevent potential hazards.
2. د خوندیتوب معلومات
خبرداری: To avoid electric shock or personal injury, and to prevent damage to the meter or to the equipment under test, observe the following safety rules:
- تل د محلي او ملي خوندیتوب کوډونو ته غاړه کیږدئ.
- که چیرې میټر خراب ښکاري یا قضیه خلاصه وي نو مه یې کاروئ.
- میټر په لوند چاپیریال یا د چاودیدونکي ګاز یا دوړو په شتون کې مه کاروئ.
- Ensure the function switch is in the correct position for the desired measurement before connecting to the circuit.
- The meter is rated for CAT III 300V. Do not apply more than the rated voltagد ټرمینلونو ترمنځ یا د هر ټرمینل او ځمکې ځمکې ترمنځ.
- Always disconnect the meter from the circuit before changing the battery.
3. محصول ختم شوview او اجزا
The Kaise SK-7830 is a compact and robust digital current clamp meter. Familiarize yourself with its main components:
This image displays the Kaise SK-7830 Digital Current Clamp Meter. Key components visible include the current clamp jaw at the top, the digital display screen in the middle, and the rotary function switch below the display. The trigger for opening the clamp is on the left side.
- اوسنی Clamp ژامې: Used to encircle the conductor for non-contact current measurement.
- محرک: Squeezed to open the clamp ژامه
- ډیجیټل ډیزاین: Shows measurement readings, units, and other indicators (4000 counts).
- د فعالیت سویچ: Rotary switch to select measurement functions and ranges (OFF, 40A/200A, 4000mA).
- Data Hold Button (if applicable): په ښودنه کې اوسنی لوستل کنګل کوي.
- Zero Adjustment Button (if applicable): Used to zero the display before DC current measurements.
4. ترتیب کول
The Kaise SK-7830 requires 1 AAA battery for operation, which is included with the device.
4.1 د بیټرۍ نصب کول
- د میټر په شا کې د بیټرۍ د برخې پوښ ومومئ.
- د بیټرۍ کڅوړه خلاصولو لپاره سکرو ډرایور وکاروئ.
- Insert one AAA battery, observing the correct polarity (+ and -) as indicated inside the compartment.
- د بیټرۍ کمپارټ پوښ بدل کړئ او د سکرو سره یې خوندي کړئ.
5. عملیاتي لارښوونې
5.1 بریښنا کول / بندول
To power on the meter, rotate the function switch from the "OFF" position to any desired measurement range (e.g., 40A/200A or 4000mA). To power off, rotate the function switch back to the "OFF" position.
5.2 اوسنی اندازه کول
The SK-7830 is designed for measuring DC current. Ensure the circuit is de-energized if possible before clamping.
- Rotate the function switch to the appropriate current range (e.g., "40A/200A" for higher currents or "4000mA" for lower currents). If unsure, start with the higher range and decrease if necessary.
- For DC current measurements, press the "O ADJ" or Zero button (if available) to zero the display before clamping around the conductor. This compensates for any residual magnetism in the clamp ژامه
- د cl خلاصولو لپاره محرک فشار ورکړئamp ژامه
- په احتیاط سره کلپ ځای په ځای کړئamp jaw around a single conductor through which the current you wish to measure is flowing. Ensure the conductor is centered within the jaw for accurate readings.
- د کلپ بندولو لپاره ټریګر خوشې کړئamp jaw securely around the conductor.
- Read the current value displayed on the digital screen. The display will show the current in Amperes (A) یا ملیAmperes (mA) depending on the selected range.
- To take another measurement, open the clamp, remove it from the conductor, and repeat the process.
یادونه: د clamp meter measures current flowing through a single conductor. Do not clamp around multiple conductors (e.g., a power cord with both live and neutral wires) as the magnetic fields will cancel out, resulting in an inaccurate or zero reading.
6. ساتنه
6.1 پاکول
قضیه د اعلان سره پاک کړئamp ټوکر او معتدل صابون. د کثافاتو یا محلولونو څخه کار مه اخلئ. پاک وساتئamp jaw clean and free of debris to ensure proper operation.
6.2 د بیټرۍ بدلول
When the battery low indicator appears on the display, replace the battery immediately to ensure accurate readings. Follow the battery installation steps in Section 4.1.
6.3 ذخیره کول
If the meter is not to be used for an extended period, remove the battery to prevent leakage and damage to the device. Store the meter in a cool, dry place, away from direct sunlight and extreme temperatures.
7. ستونزه حل کول
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| هیڅ ښودنه یا کمزوری ښودنه نشته | ټیټ یا مړ بیټرۍ | د AAA بیټرۍ بدل کړئ. |
| Inaccurate current reading | Clamp not fully closed; Multiple conductors in jaw; Incorrect range selected; Residual magnetism (for DC) | کل ډاډ ترلاسه کړئamp is closed around a single conductor; Select appropriate range; Use zero adjustment for DC. |
| میټر نه چالانېږي | Battery not installed correctly; Function switch not in a measurement position | Check battery polarity; Rotate switch to a measurement function. |
8. مشخصات
| فیچر | مشخصات |
|---|---|
| د ماډل شمیره | SK-7830 |
| د اندازه کولو ډول | اوسنی Clamp Meter (DC) |
| د ښودلو شمیرې | 4000 |
| من عملیاتي حجمtage | 300 ولټه |
| د خوندیتوب درجه | CAT III 300 V |
| د بریښنا سرچینه | په لاس چلول شوی |
| بیټرۍ | 1 AAA بیټرۍ (شامل) |
| د محصول ابعاد (L x W x H) | 7.99 x 2.4 x 1.18 انچه |
| د توکي وزن | 11.29 اونس |
| جوړونکی | کایس |
| نیټه لومړی شتون لري | د اګست ۷، ۲۰۲۴ |
9. تضمین او ملاتړ
For warranty information or technical support regarding your Kaise SK-7830 Digital Current Clamp Meter, please contact your point of purchase or the manufacturer directly. Keep your purchase receipt as proof of purchase.
For general inquiries, please refer to the contact information provided by Kaise or your authorized distributor.
